PROVN OF GUN SHED AT 92 MED REGT AT SRC LINE , PROV OF PARKING SHED IN OFFICE OF 36 RA LINE NO 2 PS SEC, CCIB AND PROV OF VEH PARKING SHED FOR OFFRS, JCOS AND OR OF 409 FD HOSP UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50mtr in depth and getting out in hard/dense soil complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in Foundations filling and mass concrete complete all as specified and directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning filling in,including spreading levelling, watering and well ramming in layers not exe 25 cm.in hard dense soil complete as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished flat surface of concrete complete all as specified & all as directed.

M&L for form work to sides of pillars posts, struts piers, columns & stanchions square, rectangular or polygonal for fair finished flat surfaces of concrete complete all as specified & as directed.

M&L for TMT bars 10 mm dia and above & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips complete all as specified and directed.

All as per item No 9.00 above but 6mm dia to 8mm dia in stirrups spacers & binders etc complete all as specified and as directed.

M&L for RCC M-25(20mm graded crushed stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc complete all as specified and directed.

M&L for RCC M-25(20mm graded crushed stone aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on wall of brick work of concrete surface, finished even and smooth with out using extra cement complete all as specifed and directed

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for broken stone hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4 type B-1 using 20 mm graded crushed stone agg complete all as specified and directed.

M & L for 100mm thick plain cement conc type C-2, 1:3:6 using 40 mm graded crushed stone agg as in sub base complete all as specified and directed.

M & L for 75 mm thick plain cement conc type D-2, 1:4:8 using 40 mm graded crushed stone agg as in sub base complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed.

M&L for 50mm thick plain cement concrete (1:3:6) type C1, using 20mm graded crushed stone stone aggregate as in plinth protection,floor finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate omplete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 grade st-240 complete all as specified and directed.

M&L for Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed .

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed .

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4, surface finsihed even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surface of wall and applying two coat of weather coat over and including 2mm thick wall care putty complete all as specified and directed.

VIRAT CONSTRUCTIONS (BID ID -3059419)

M/S Keshav Brothers (BID ID -3056449)

Manglam Engineers and Construction Co (BID ID -3058862)

M/S AMAR ELEKTRO CENTRE (BID ID -3059312)

Deepak Kumar Gupta (BID ID -3059190)

Shree Ganpati Enterprises (BID ID -3054158)

AR Enterprises (BID ID -3059114)

Gupta Automobiles (BID ID -3058447)

SA construction co. (BID ID -3059494)

M/S KAPIL ENTERPRISES (BID ID -3057030)

Arun Construction Co. (BID ID -3058728)