C/O Police Station for State Vigilance Department and Anticorruption Bureau at Hamirpur

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) breaking with breakers and other intermediate classification of soil, setting out true to the required line, grades width cutting and trimming of side slopes and level as shown on the drawing and as per directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of un-serviceable material for filling in road ways, camber, embankments for grade improvements and disposal of all un-useful surplus material to required width of the road or to approved dumping sites by Engineer-in-Charge through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machinery, material, tools equipments and safety measures and incidentals. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work, soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts, disposed materials to be neatly levelled.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases for columns etcetera for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Columns, piers, abutments, pillars, posts and struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slab and breaks in floors and walls under 20cm ( twenty centimetre) wide

Stairs, (excluding landings) except spiral stair cases

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses filletes, kerbs and steps including retaining walls, return wall etcetera

Providing and laying in position cement concrete of 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominalsize .in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor levels, excluding the cost of centering, shuttering and finishing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate for all works upto plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five millimetre nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty millimetre) nominalsize).in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera up to all floor levels, excluding the cost of centering, shuttering and finishing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) size) for All work up to plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying design mix reinforcement cement concrete M25 ( M- Twenty five) with minimium crushing strength of 25N/mm2( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic metres, mechanically mixed and vibrated and curing complete in Foundation footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floorlevels, excluding the cost of centering, shuttering, finishing and reinforcement with design mix cement concrete M25 ( M- Twenty five) with minimium crushing strength of 25N/mm2 ( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic meter, mechanically mixed and vibrated and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in position specified grade of Reinforced cement concrete work design mix cement concrete M25 ( M- Twenty five) with minimium crushing strength of 25N/mm2( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic meter, mechanically mixed and vibrated and curing complete in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor levels, excluding cost of centering, shuttering, finishing and reinforcement upto all floor levels including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Smooth finishing of the exposed surface of R.C.C. work with 6 mm ( six millimetre) thick cement mortar 1:3 (one Cement : three fine sand). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Steel reinforcement (TATA ,TISCON ,SAIL, Jindal Panther, RINL, Shyam Steel) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wires above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay modular bricks of class designation 7.5 (seven point five) in foundation and plinth in: in cement mortar 1:6 ( One cement : Six coarse sand) in foundation and plinth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor levels in all shapes and sizes with Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor levels in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundations and plinth in : in cement mortar 1:4 (One cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm ( twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing cup board shutters 25 mm ( twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 19mm Pre-laminated flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked, Action Tessa, Novapan, Kitply, National, Archid Ply make) with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,,Green ply,Kit ply make in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 12mm ( twelve millimetre) thick commercial ply conforming to IS : 1328 BWR type of Action Tessa, Novapan Kitply,Green Ply, National, Archid Ply make ,plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete (Frame work shall be paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing & Fixing .1.00 mm ( one millimetre) thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality Action Tessa, Novapan, Kitply, Green Ply, National, Archid Ply make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 2nd ( second) class teak wood lipping/ moulded beading or taj beading of size 18X5 mm ( eighteen into five millimetre) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing angle iron frame of door window clearstory window frame manufactured from M.S. angle iron section of 35mmx35mmx4mm ( thirty five millimetre into thirty five millimetre into four millimetre) and 50mmx4mm ( fifty millimetre four millimetre) thickness mild steel flat in combination welded together to make one frame including hinges jamb, lock jamb, bed and if required angle threshold of mild steel angle 50x25mm (Fifty into twenty five millimetres) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm (Two point five millimetres) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Top Hung steel glazed doors window or ventilators of standard steel channels section 75x40mm (Seventy five into forty millimetres) with MS flat 75x4mm(Seventy five into four millimetres) in combination welded together and standard Z-section style of standard size with mesh bars of T-section 25x25x3mm (Twenty five into twenty five into three millimetres) and angle iron 25x3mm (Twenty five into three millimetres) and joints metered and welded with 16x3.15mm (Sixteen into three point fifteen millimetres) lugs 100mm (One hundred millimetres) long embedded in cement concrete block 15cm x 10cm x 10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (One cement : three coarse sand : six graded/crushed stone aggregate) 20mm (Twenty millimetres) nominal size or with wooden plug and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of Glass panes with glazing clips and special metal mesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 35mm ( thity five millimetre) thick second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Butt hinges and necessary screws shall be paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 12mm ( twelve millimetre) thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked (Action tesa,,Green ply,Kit ply, Nona pan,National, Archid ply make ) panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm ( twenty five millimetre) to 40 mm ( forty millimetre) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 12 mm ( twelve millimetre) thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I,Type II IS: 12823 marked (Action tesa,,Green ply,Kit ply Novapan,National, Archid ply make ) panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm ( twenty five millimetre) to 40 mm ( forty millimetre) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 12 mm thick Plain particle board flat pressed, 3 ( three ) layer or graded wood particle board medium density Grade I, IS : 3087 marked (Action tesa,,Green ply,Kit ply Nova pan,National, Archid ply make ) panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm ( twenty five millimetre) to 40 mm ( forty millimetre) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 35 mm ( thirty five millimetre) wire gauge shutters of 2nd ( second) class teak wood using galvanized M.S. wire gauge of average width of aperture 1.4 mm ( one point four millimetre) in both directions with wire of dia 0.63 mm,( zero point six three millimetre) for doors, windows and clerestory windows with hinges and necessary screw with ISI marked M.S. pressed butt hinges bright finished of required size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S. grills of required pattern in frames of windows etcetera with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Float glass panes of nominal thickness 5 mm ( five millimetre) make of Modi Float, Saint Govind, Aashai (weight not less than 12.5kg/sqm ( twelve point five kilogram per square metre) of renewing glass panes with putty and nails wherever necessary including racking out the old putty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

300x16mm (Three hundred into sixteen millimetre) nominal size.

250x16mm (Two hundred fifty into sixteen millimetre) nominal size.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

200x10mm (Two hundred into ten millimetre) nominal size.

150x10mm (One hundred fifty into ten millimetre) nominal size

100x10mm (One hundred into ten millimetre) nominal size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

75mm (Seventy five millimetre)

Providing and fixing 150x10mm (One hundred fifty into ten millimetre) nominal size ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 100mm (One hundred millimetre) ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing chromium plated brass 50 mm ( fifty millimetre) cupboard or wardrobe knobs (Link/Godrej/Hettich Make) with nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40mm ( forty millimetre) special quality bright finished brass cupboard or ward robe locks (Link/Godrej /Hettich Make) with four levers of approved quality (including necessary screws etcetera complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 150 mm ( one hundred fifty millimetre ) bright finished floor brass door stopper (Link/Godrej/Hettich Make) with rubber cushion, necessary brass screws etcetera to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 150mm ( one hundred fifty millimetre ) bright finished brass hard drawn hooks and eyes heavy duty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 25mm ( twenty five millimetre ) dia chromium plated brass curtain rod having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetera wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Triple strip vertical type magnetic catcher of approved quality (Hettich/Godrej) in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 150 mm ( one hundred fifty millimetre ) bright finished brass hasp and staple (safety type) with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone 25mm ( twenty five millimetre) thick slab flooring over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab , including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone 25 mm ( twenty five millimetre) thick flooring in treads of steps and risers using single length up to all length/width over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 ( one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone slabs 20 mm ( twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complet upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Extra for pre finished nosing in treads of steps of kota stone/Marble stone slab including rubbing and polishing complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Marble stone Makrana white second quality marble flooring with 18 mm ( eighteen millimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Polished Granite stone ( slab jet Black, Cherry Red, Elite Brown, Cat Eye colour) or required flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge.Polished upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient Bell,Kajaria, NITCO, Somany, RAK Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three per kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% ( zero point zero eight percent) and conforming to I.S. 15622, of Orient Bell, Kajaria, NITCO, Somany, RAK, Johnson & Johnson approved make , in all colours and shade, in skirting, riser of steps, over 12 mm ( twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point htree kilogram per square metre) including grouting the joint with white cement & matching pigments etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying matt finished vitrified tile of size 300x300 x 9.8mm ( three hundred into three hundred into nine point eight millimetre) having with water absorption less than 0.5% ( zero point five percetage) and conforming to IS: 15622 of Orient bell, Kajaria, NITCO, Somany, RAK, Johnson & Johnson approved make , in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etcetera, laid on 20mm ( twenty millimetre) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etcetre complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1st quality HD series Digital Ceramic Glazed rectified tiles (300mmx600 mm size)conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell, Kajaria, NITCO, Somany, RAK, Johnson & Johnson approved make , in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

40 mm thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm ( twenty millimetre ) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Precast terrazo tiles 22 mm ( twenty two millimetre) thick of NTC make with graded marble chips of size upto 12 mm,( twelve millimetre) laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 (one cement: four coarse sand) Light shade pigment using white cement upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Precast terrazo tiles 22 mm ( twenty two millimetre) thick of NTC make with graded marble chips of sizes upto 12 mm ( twelve millimetre), in skirting and risers of steps not exceeding 30 cm ( thirty centimetre) in height, on 12 mm ( twelve millimetre) thick cement plaster 1:3 (one cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of Light shade pigment using white cement upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Chequered terrazo tiles 22 mm ( twenty two millimetre) thick of NTC, NITCO, Modern, GICO make with graded marble chips of size up to 6 mm ( six millimetre) in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (one cement :four coarse sand) Light shade pigment using white cement upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm ( twenty into ten into two millimetre) and braced with flat iron diagonals 20x5 mm ( twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6 mm, ( forty into forty into six millimetre) with 40 mm ( forty millimetre) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) TATA, Durashine Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Ridges plain 500 - 600mm ( five hundred to six hundred millimetre) precoated galvanised steel sheet roofing accessories TATA, Durashine Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Crimp curve precoated galvanised steel sheet roofing accessories TATA, Durashine Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per sqm as per IS: 277, in 240 ( two hundred forty ) mpa steel grade, 5-7 (five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing accessories TATA, Durashine Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Gutter 600 mm ( six hundred millimetre) over all girth precoated galvanised steel sheet roofing accessories 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 6 mm ( six millimetre) thick Cement fiber board as per IS:14862 plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetera complete (frame work to be paid seperatately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimetre) dia of Supreme,Finolax,D-plast Vectus make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme,Finolax,D-plast Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bend 87.5° ( eighty seven point five degree) 110mm (one hundred ten millimetre ) dia of Supreme,Finolax,D-plast Vectus on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Shoe (Plain) 110mm (one hundred ten millimetre) dia of Supreme,Finolax,D-plast Vectus on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections and single sections, trusses, purlins,rafters and Similar framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (TATA/SAIL/JSW Make ) fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel tube hand rail of approved size by welding etcetera to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel (Tata, Sail, Jindal Panther ) round holding down bolts with nuts and washer plates complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing Second class teak wood work in frames of hand railing, doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer (ASAIN,NEROLAC,ICI-DULUX, Beger, Shalimar ) of approved brand and manufacture on wood work (hard and soft wood) paint including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five per ten square metre) (ASAIN,NEROLAC,ICI-DULUX, Beger, (Luxol High Glass)Shalimar paint ( premium apecolite Gloss) of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero per ten square metre) (ASAIN,NEROLAC,ICI-DULUX, Beger, (Luxol High Glass)Shalimar paint ( premium apecolite Gloss) of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Polishing on New wood work with ready mixed wax polish of approved brand and manufacture (Asian) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm ( six millimetre ) plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm (twenty millimetre) cement plaster of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing with Epoxy paint On concrete work (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, (ASAIN/NEROLAC/ICI-DULUX ) preparation of surface, etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (ASAIN,NEROLAC, Shalimar, JENSONNICHLSON (J&N) Golden Paints Aqualac including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade (Berger (Castle), JENSON & NICHOLSON (JXN) Golden Paint Aqualac ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) (ASAIN Paints,(TractorAcrylic Nerolac, Berger (Bison Acrylic) Shalimar) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetera of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick ( fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 60mm thick cement concrete paver block of M-35 ( M-thirty five) grade with approved Make (NTC/MODERN/NTE), colour, design and pattern including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

WATER SUPPLY AND SANITARY INSTALLATION

Providing and fixing water closet squatting pan (Indian type W.C. pan of CERA,HINDWARE,PARRYWARE, make) with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern (CERA,HINDWARE,PARRYWARE, make), including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty) with integral type foot rests hindware ,cera Universal Pan No. 2071 ( two thousand seventy one) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten ) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic soft closing seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, Jaquar, Jal,HINDWARE,PARRYWARE, make) shape, size and pattern including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of , Jal, Jaquar Parryware, Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever require d White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jacquar make (OPAL SERIES) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar Parryware, Hindware make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete semi rigid pipe 32mm ( thirty two millimetre) dia of Hindware or Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeof including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail make of Prayag complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre) long towel rail with total length of 645 mm ( six hundred forty five millimetre) width 78 mm ( seventy eight millimetre) and effective height of 88 mm ( eighty eight millimetre) weighing not less than 190 gms.( one hundred ninety gram) of Hindware or Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600 x 120 x 5mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera, complete of Hindware or Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre ) breadth 102mm ( one hundred two millimetre ) height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jal, Jaquar Parryware, Hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass, push cock of approved quality and colour15 mm ( fifteen millimetre) nominal bore, 98 mm ( ninety eight millimetre) long, weighing not less than 75 gms ( seventy five gram) of Jal, Jaquar Parryware, Hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (eight hundred ten gram) make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia. C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) make of Leader, Zoloto, Kilbum, CIM, Valves Sant including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) make of Leader, Zoloto, Kilbum, CIM, Valves Sant including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore brass furrule with C.I. mouth cover including boring and taping the main of Tata/zindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making connection of G.I distribution branch with G.I. main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamberwith water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five kilogram) and frame to be not less than 2.70 kg (two point seven zero) as perstandard design square mouth trap 100 x100mm (one hundred into one hundred millimetre) ( size P-typeWith common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall make of Jindal ( Hissar), Tata Steel, Tubes Ltd. Prakash B.S.T. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall make of Jindal ( Hissar), Tata Steel, Tubes Ltd. Prakash Surya including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 16mm (sixteen millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal make of Parryware, Hindware Jaquar, Cera of size 580x380x350 mm ( five hundred eighty into three hundred eighty into three hundred fifty millimetre) with Pressmatic series auto closing CP Brass urinal valve of Jaquare with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of three half stall urinals with Pressmatic auto closing CP Brass urinal valve of Jaquar separate for each urinal including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P Brass toilet paper holder make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal dia CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five) dia nominal size soil, waste and vent pipes centrifugally cast (spun) iron socketed pipe as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm dia (one hundred millimetre) nominal size soil, waste and vent pipes Centrifugally cast (spun) iron socket and spigot (S&S) pipe as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing centrifugally Sand cast iron (S&S) as per IS - 3989 100 mm (one hundred millimetre) inlet and 100 mm (One hundred millimetre) outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing centrifugally Sand cast iron ( S&S ) as per IS - 3989 100mm ( one hundred millimetre ) nominal size bend of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing centrifugally Sand cast iron (S&S) as per IS - 3989 75mm (seventy five millimetre) nominal size bend of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100x100x100mm ( one hundred into one hundred into one hundred millimetre) nominal size single equal plain junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete.Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm ( seventy five into seventy five seventy five millimetre) nominal size single equal plain junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete.Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) nominal size plain bend of required degree of centrifugally Sand cast iron (S&S) as per IS : 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Provding and fixing 75mm (Seventy five millimetre) nominal size plain bend of required degree centrifugally sand cast iron (S&S) as per IS 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre) nominal size plain bend of required degree of centrifugally Sand cast iron (S&S) as per IS : 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre) nominal size collar Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre) nominal size collar Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100x100x100 x100 mm (One hundred into one hundred into one hundred into one hudred millimetre) Sand cast iron S&S as per IS - 3989 double equal junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75x75mm (seventy five into seventy five into seventy five into seventy five millimetre) Sand cast iron S&S as per IS - 3989 double equal junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100x100x100 x100 mm (One hundred into one hundred into one hundred into one hundred millimetre) Sand cast iron S&S as per IS - 3989 double equal plain junction of required degree including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75x75mm (seventy five into seventy five into seventy five into seventy five millimetre) Sand cast iron S&S as per IS - 3989 double equal plain junction of required degree including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100x100x100 mm (One hundred into one hundred into one hundred millimetre) Sand cast iron S&S as per IS - 3989 single equal plain junction of required degree including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm (seventy five into seventy five into seventy five millimetre) Sand cast iron S&S as per IS - 3989 single equal plain junction of required degree including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) dia pipe nominal size sand cast iron S&S off sets as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal size sand cast iron S&S off sets as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 100mm (one hundred millimetre) nominal size lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 75mm (seventy five millimetre) nominal size lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all leads and lifts for Pipes, cables etc. exceeding 80 mm (eighty millimetre) dia. but not exceeding 300 mm (three hundred millimetre) dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimetre) cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) as per standard design With 20x20 mm (twenty into twenty millimetre) square bar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 100mm (one hundred millimetre) dia cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with out frame for manholes 455x610mm(Four hundred fifty five into six hundred ten millimetres) (Light duty ) the weight of cover to be not less than 23kgs(Twenty three kilogramme) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 3.00 HP (Three Horse power) H.P. Tullu Pump ( Crompton make ) with accessories complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

MSC Roads and Bridges Private Limited