8326/E8

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of plain cement concrete ( Un reinforced) of any description and in any position not otherwise specifically provided for complete all as specifieda nd as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling floor, hearth or wall glazed tiling including cement mortar bedding (but not backing), removing the debries all as specified and directed.

Taking up or down 15mm bore galvanised steel water tubing (any grade) and all connections fixed on walls ceiling floor etc including cleaning for refixing complete all as directed by Engr-In-Charge.

All as per item No 5.00 here -in- before but for 20 mm bore.

All as per item No 5.00 here -in- before but for 25 mm bore.

All as per item No 5.00 here -in- before but for 40 mm bore.

Taking down wooden chowkhat with shutter without taking off shutter from frame area n.exc.1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Material and Labour Plain cement concrete type C1(1:3:6, using 20mm graded crushed stone aggregates) as in sunken portion of floor etc complete all as specified and directed .

Material and Labour for Reinforced cement concrete 1:1.5:3, type A0, (using 12.5 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete including demolition of old unserviceable RCC all as specified and directed.

Material and Labour for Reinforced cement concrete 1:1.5:3, type A0, (using 12.5 mm graded stone aggregate) as in chajja complete all as specified and directed including demolotion of old unserviceable RCC.

Material and Labour for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregates) as in filling in depression in roof slab complete all as specified and directed.

Material and Labour for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregates) as fixing of holdfasts complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

All as above Item No.19.00 here-in-before but half brick thick wall, straight or curved on plan of any radius.

Material and Labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

Material and Labour Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished flat surfaces of concrete complete all as specified and directed.

Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by the Engr-in-Charge.

Supply and fix 35mm thick 2nd class hard wood glazed & skeleton door shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick factory made flush shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-Charge.

Supply and fix Solid PVC door frame of size 50X47mm made out of 5mm thick plain coloured PVC sheet reinforced with MS square tube fixed as per manufacturer instruction complete all as specified and directed.

Supply & fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification and drawing and all as directed by the Engr-in-Charge.

Supply and fix Steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars , dovetailed or welded including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and fix Steel Ventilators with frame, top hung shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge including taking down old unserviceable one.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix 100mm Butt hinges stainless steel complete all as specified and directed by Engr-in-Charge.

Supply and fix 100mm size butt hinges medium weight cold rolled,mild steel complete all as specified and directed by Engr-in-Charge.

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

Supply and fix 150mm long extruded aluminium alloy handles, anodized, fabricated type, complete all as specified and directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy complete all as specified and directed by Engr-in-Charge.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws complete all as specified and directed.

Supply and Fix Mild steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and as directed.

Supply and Fix Mild steel Framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Material and Labour Water proofing treatment on RCC roof etc. comprising with the following operation and as specified here in below complete all as specified and as directed including taking out old unserviceable APP membrane alongwith roof padding concrete and screed bed:- (a) 25mm thick PCC type B0 (1:2:4, using 12.5mm graded crushed stone aggregates) as in roof padding. (b) 15 mm thick screed bed in cement mortar 1:4 as in roof padding with slope 1:40. (b) Applying one coat of cold bituminous primer to the plastered surface @ 0.40 litres per Sqm conforming IS-3384. (c) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.6 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm ) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (d) One coat of bituminious aluminium paint over the APP based membrane @ 0.11 Ltr/Sqm.

Material and Labour Applying first coat of cement slurry in sunken floor @ 0.488 Kg/ Sqm mixed with acrylic based polymer modified cementitous composit compound @ 0.253 Kg /Sqm this layer will be allowed to air cure for for 4 hrs & second layer of cement slurry @ 0.242Kg /Sqm mixed with acrylic based polymer modified cementitous compound @ 0.126 Kg/Sqm & this layer will be allowed to air cure for 4hrs followed with water curing for 48 hrs & applying 200 micron thick polythene film paste with help of adhesive shall be provided over treatment & all as specified & as directed by Engr in charge.

Materials and labour for Vitrified ceramic tiles, light shade 10 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm, as in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Materials and labour for Vitrified ceramic tiles, light shade 10 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm, as in vertical surfaces such as skirting, dado etc etc, including 10mm thick backing course in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Materials and labour for non-skid, ceramic, joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per item No.44.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour for non-skid, ceramic, joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per item No.47.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed, ceramic, coloured tiles of size 300mm x 200mm x 7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing course cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) complete all as specified and directed.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement upto any height of building including scaffolding and safety measure complete all as specified and directed.

Material and Labour Rendering 5 mm thick on fair faces of brick work or concrete surfaces of ceiling and chajja in cement mortar 1:3 and finished the surfaces even and smooth without using extra cement upto any height of building including scaffolding and safety measure complete all as specified and directed.

Material and labour Rendering 20mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each 10mm thick mixed with integral water proofing compound as per manufacturer instruction (WPC shall be mixed with top layer only) fair finished without using extra cement upto any height of building including scaffolding and safety measure complete all specified and as directed. Note:- Water proofing compound shall be measured and paid separately as "Supply only".

"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA

Material and Labour Acrylic emulsion distemper of any colour / tint, two coats over a coat of primer over newly plastered internal wall surfaces including necessary preparation of surfaces upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Material and Labour Acrylic emulsion distemper of any colour / tint, two coats over a coat of primer over newly plastered internal ceiling surfaces including necessary preparation of surfaces upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Material and Labour Exterior emulsion paint ( Weather coat) of any colour/ tint, two coats over a coat of alkali resistance primer including necessary preparation of surfaces upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Material and Labour Synthetic enamel paint of any colour / tint, two coats over a coat of red oxide primer on steel or iron surfaces over 10 Cm width or girth upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Material and Labour Synthetic enamel paint of any colour / tint , two coats over a coat of pink primer on wood or wood based surfaces over 10 Cm width or girth upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Material and Labour Scrapping and removing old paint, stain loose materials and algae, fungus growth then cleaning of surface with water using pressure washer machine ( Berger Jet washer or equivalent from Asian pains/ Nerolac) then cracked filled with acrylic based textured crack filler ( Berger Crack Fill plaster) with polymer mortar made out of Shali SBR Latex ( Berger Super latex or equivalent of Asians Paints/ Nerolac) @ 0.10 Ltr/ Sqm. Plastiseal materials shall be STP / Fosroc/ Dr Fixit and an application of Shali Primer WB Primer @ 0.10 Kg/ Sqm, alkali resistant property diluted with water in the ratio 1: 0.50 and application of two coats of water based Shalicyl 215 exterior coating paint over the primer of approved shade complete all as specified and directed. Note:- 05 ( Five) years performence gurantee shall be given by the manufacturers of paints

Material and Labour Scrapping and removing old paint, stain loose materials and algae, fungus growth then application of one coat of Bio Block ( Berger Bio Wash / asian paints / Nerolac) then cleaning the surface with water using pressure washer machine ( Berger Jet washer or equivalent from Asian pains/ Nerolac) then cracked filled with acrylic based textured crack filler ( Berger Crack Fill plaster) and application of one coat of primer cum sealer having alkali resistant property followed by application of two coats modified acrylic emulsion paint of approved sgahde having silicon aditives propertycomplete all as specified and directed. Note:- 05 ( Five) years performence gurantee shall be given by the make of paints.

Material and Labour Synthetic enamel paint of any colour / tint , two coats over a coat of pink primer on wood or wood based surfaces over 10 Cm width or girth upto any height of building with necessary sccffolding and safety measure complete all as specified and directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 Sqm in each pane including hacking out of unserviceable sheet glass complete all as specified and directed by Engr-in-Charge.

Supply and fix 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 Sqm in each pane including hacking out of unserviceable sheet glass complete all as specified and directed by Engr-in-Charge.

Disconnecting existing water tank of capacity exc 250 litres & n.exc 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, etc including writing letters/figures boldly & solidly “TANK CLEANED ON ________ (Date of Cleaning )” with two coats of synthetic enamel paint (1st grade quality) of height of letter 5 Cm & width 2.5 Cm with oblitering the old one complete all as specified and as directed by the Engr-in-Charge.

All as per item 65.00 here-in-before but capacity of tank exc 500 litres and n'exc 1000 litres

All as per item 65.00 here-in-before but capacity of tank exc 1000 litres and n'exc 2000 litres.

Supply and Fix PVC Tank cover for water tank of any capacity with proper locking arrangement including taking down unserviceable tank cover and as directed by the Engr-in-Charge.

Supply and Fix PVC seat cover, white with recess bottom with PVC hinging device including taking down unserviceable tank cover and as directed by the Engr-in-Charge.

Supply and fix tubes 15mm bore medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

All as per item No.66.00 here-in-before but 20mm bore.

All as per item No.66.00 here-in-before but 25mm bore.

All as per item No.66.00 here-in-before but 40mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position with new fittings (wall, ceiling, floor etc.) complete all as specified and directed by Engr-in-Charge.

All as per item No.70.00 here-in-before but 20mm bore.

S&F Rotational moulded HDPE water storage tanks of 2000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked complete all as specified and directed including taking down old unserviceable tank . Make:- Sintex/ Polycon/ Patton.

S&F Rotational moulded HDPE water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked complete all as specified and directed including taking down old unserviceable tank . Make:- Sintax/ Polycon/ Patton.

S&F Rotational moulded HDPE water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked complete all as specified and directed including taking down old unserviceable tank . Make:- Sintax/ Polycon/ Patton.

Supply and fix in repair 15 mm Gun-metal, globe or gate valves, Class-I, with iron wheel head, screwed both end for iron pipe and fixed 9th floor to 12th floor complete all as specified and directed.

Supply and fix in repair 20 mm Gun-metal, globe or gate valves, Class-I, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 25 mm Gun-metal, globe or gate valves, Class-I, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 40 mm Gun-metal, globe or gate valves, Class-I, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fix 40mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make- Prayag/ Polytuf.

Supply and fix 25mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make- Prayag/ Polytuf.

Supply and fix in repair 15mm Bib Taps, fancy type, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make : Essco Cat No. MQT -512KN or equivalent model from approved list of makes specified in Particular Specification.

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe. Make : Essco Cat No. MQT 507KN or equivalent model from approved list of makes specified in Particular Specification.

Supply & fix in repair 15mm bore stop cock, cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends female end for iron pipe or for unions complete all as specified and directed. Make:- Essco Cat Part No. MQT 513B or equivalent model from approved list of makes specified in Particular Specification.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make:- Parryware Model No C-8090 or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix 550x400 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Hindware Cat No. 10010 or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Hindware Cat No 20042 or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix in repairs Vitreous china Urinal, full stall type, white ( excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, poiunting around urinal back in cement, complete including taking down old unserviceable one and as specified and as directed by Engineer-in-Charge. Make:- Parryware Cat part No. C0575 or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12 Cm wide with chromium plated bracket guard and railing 60 Cm long complete all as directed by Engineer-in-Charge. Make: Prayag/ Jaquar/ Cera

Supply and fix in repair stainless steel (conforming to AISI-304 grade) kitchen sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mmx 165mm depth, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed. Make : Nirali, Elegance (regular) Range or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix in repair Stainless steel kitchen rack of size 900mm x800mm x250mm, complete all as directed.

Supply and fix in repair PVC connection 600 mm long fixed to 15mm GI pipe upto 4th complete all as specified and directed. Make:- Prayag/ Polytuf.

Supply and fix in repair CP Towel Rail 600mm Long fixed with and including CP brass screws and wooden / plastic cleats complete all as specified and as directed. Make : Essco cat Part No.AEC-1111 or equivalent model from approved list of makes specified in Particular Specification.

Supply and fix in repairs, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

Supply and fix in repair CP health faucet with 1m tube & wall hook fixed on wall complete all as specified and as directed. Make:- Essco cat part No. Or equivalent model from approved list of makes specified in Particular specification

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed including taking down old unserviceable PVC(SWR) pipe with unserviceable fittings.

Supply and fix 110 mm bore, PVC (SWR) pipe, double socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed including taking down old unserviceable PVC(SWR) pipe with unserviceable fittings.

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix 100mm bore cast iron soil, waste and vent spun pipes in any length with or without ears, with cement joints, fixed to walls or floors and disturbed portion of the wall making good with cement concrete in (1:2:4) including distance pieces, plugs, holder bats etc and all as specified including dismantling old unserviceable cast iron soil waste pipe.

Supply and fix 100mm bore of pipe Cast Iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

Supply and fix 100mm bore of pipe CI bends (any radius) with duck foot or heel rest bends complete all as specified and directed.

Supply and fix 100mm bore of pipe CI sanitary connection socket to fit WC outlet complete all as specified and directed.

Supply and fix 100mm bore of pipe CI sanitary connection bend 92.5° with arms 380 to 450mm excluding joint outlet complete all as specified and directed.

Supply and fix 100mm bore of pipe CI sanitary connection for short connection pipe of length 300mm complete all as specified and directed.

Supply and fix in repairs 100mm dia of outlet of pipe CI Nahani trap with grating complete all as specified and directed.

Supply and fix in repairs 100mm dia of outlet of pipe CI floor trap with grating complete all as specified and directed.

SREE GURU CONSTRUCTION CO

NUPUR CONSTRUCTION