Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹17.3 L+₹1.8 L (11.3%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L2 | Rejected-AOC NOT LOWEST BIDDER | |
| 3 | L3₹17.9 L+₹2.4 L (15.3%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-AOC NOT LOWEST BIDDER | |
| 4 | L4₹18.9 L+₹3.3 L (21.2%)Rejected-AOC 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L4 | Rejected-AOC NOT LOWEST BIDDER | |
| 5 | L5₹19.0 L+₹3.5 L (22.2%)Rejected-AOC HOUSE NO 164 SHASTRI NAGAR NEAR JAL NIGAM BABINA CANTT DISTT JHANSI UP | BABINA CANTT | JHANSI | UTTAR PRADESH | L5 | Rejected-AOC NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S A.R BUILDERS L2 | m/s bobby enterprises L5 | M/S Ritu Tandon L3 | M/S SHIVA TRADERS L4 | PRATAP CONSTRUCTION L1 | M/S Kharya Associates L6 | M/S JAI BALAJI TRADERS L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and installation, testing and commissioing of washing point Jet shine PRO suitable for all type vehicles including consisting of Sliding under Chassis washing system, Pre 360 degree swing washing system, Foam cycleing, Waxing,High pressure jet wash and Dryer, Vaccum Cleaner - 1 set, Air Compressor - 1 set, High pressure wash pump - 1 set, Car wash foam- 5ltrs, Tyre polish - 5 ltrs, Dash board polish - 5 Ltrs, Wax/Polish - 5 Ltrs including all accessories complete | 1 | Each Job | 14,91,000 ₹14,91,000 | 16,22,000 ₹16,22,000 | 15,00,000 ₹15,00,000 | 16,30,000 ₹16,30,000 | 13,00,000 ₹13,00,000 Lowest | 16,25,000 ₹16,25,000 | 16,70,000 ₹16,70,000 |
| 1.01The General features of Car washing system shall be as given below:- (a) . Brush Model Car wash system Car wash Machine is a state -of-the art system designed to clean vehicles quickly and effectively, without requiring manual effor. These Machines is a combination of high pressure water jets, rotating brushes and eco-friendly detergents to provide throught and uniform cleaning for all type of vehicles (b). Vaccum Cleaner Advanced commercial vaccum cleaner, featuring powerful suction and versatile attachements, if effortlessly remove dirt, dust and allergens from carpets, Upholstery. Designed for convenience, durability and energy efficient single Phase, 230V, 0 Hz, having collection capacity 100 ltrsand vet and dry type (c). Air Compressor Air Compressor operated electric driven motor 3 HP Capacity, SP, 230V, 50 Hz, Air storage capacity suitable for operation of Fully automatic washing plant, Grease gun and all pnuematic tools etc (d). High Pressure wash pump High pressure car washing pump design and suitable for fully automatic car washing plant (e) Foam pump Electrical operated foam pump having maximum storage of liquid foam, suitable high pressure nozzles (f) Grease pump Pnenmatic operating grease pump, Air operating range 40-120 PSI(3-8 Nar), industrial type Note: (i) Rate included to Complete Operation and maintenace trainning will be given to the unit rep (ii) Rate included for supply only of minimum requirement of Car Wash Foam - 05 Lts, Tyre polish -05 Ltrs, Dash board polish -05 Ltrs, Wax /Polish - 05 Ltrs (iii) Rate included for car washing point control panel alongwith earthing complete | ||||||||||
| 2.00 | Cutting the existing DI pipes 150 mm dia reducing to required length and in position insertion of new tees , branches etc | 1 | Each | 500 ₹500 Lowest | 700 ₹700 | 1,000 ₹1,000 | 700 ₹700 | 5,000 ₹5,000 | 600 ₹600 | 800 ₹800 |
| 3.00 | Supply, installation, connecting, commissioning of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including locking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 200 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work and Iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-
(A) INCOMING
(i) MCCB, 4 Pole, 415V, 50HZ 100 Amps 16 KA electronic /micro processor -01 No.
(B) OUTGOING
(i) Digital Multifuction meter with selector switch and three current transformers of suitable ratio and capacity -01 Set
(ii) LED Type Phase indicator lamps for three phases set of three - 01 set
(iii) Busbar chamber having insulated aluminium busbar, each suitable for 200 Amps for three phases and neutral -01 Set
(iv) MCCB, TPN 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 10 KA-02 Nos
(v) MCB, SPN 2 pole, 230V, 50HZ 40Amps with rupturing capacity 10 KA-02 Nos (vi) Blank space for MCBs SPN - 02 Nos | 1 | Each Job | 55,000 ₹55,000 | 72,000 ₹72,000 | 54,000 ₹54,000 Lowest | 54,200 ₹54,200 | 70,000 ₹70,000 | 65,000 ₹65,000 | 56,000 ₹56,000 |
| 4.00Supply and laying GI tubing ,medium grade with all GI fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches of following sizes:- Note: Excavation and earth work will be measure and paid seperately. Make:-TATA, JINDAL, PRAKASH, SURYA | ||||||||||
| 4.01 | 25mm nominal bore | 20 | RM | 220 ₹4,400 | 210 ₹4,200 Lowest | 240 ₹4,800 | 250 ₹5,000 | 250 ₹5,000 | 210 ₹4,200 Lowest | 250 ₹5,000 |
| 4.02 | 40 mm nominal bore | 20 | RM | 450 ₹9,000 | 450 ₹9,000 | 500 ₹10,000 | 430 ₹8,600 | 400 ₹8,000 Lowest | 450 ₹9,000 | 540 ₹10,800 |
| 4.03 | 80 mm nominal bore | 40 | RM | 800 ₹32,000 Lowest | 1,100 ₹44,000 | 1,000 ₹40,000 | 870 ₹34,800 | 900 ₹36,000 | 800 ₹32,000 Lowest | 940 ₹37,600 |
| 5.00 | Excavation in trenches not exceeding 1.5mtrs wide & not exceeding 1.5mtr in depth as in soft/ loose soil & getting out complete all as spfd & directed. | 30 | CUM | 280 ₹8,400 | 350 ₹10,500 | 280 ₹8,400 | 330 ₹9,900 | 200 ₹6,000 Lowest | 370 ₹11,100 | 310 ₹9,300 |
| 6.00 | Returning , filling in spreading, levelling, watering & well Ramming in layers not exc 25cm thick complete all as spfd & directed. | 25 | CUM | 100 ₹2,500 | 120 ₹3,000 | 110 ₹2,750 | 105 ₹2,625 | 50 ₹1,250 Lowest | 120 ₹3,000 | 100 ₹2,500 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
16 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
BRIJ BIHARI, AE (CIVIL), AGE (I) TALBEHAT
LAKEVIEW CAMP MIL STN TALBEHAT, PIN - 284125
PROVN OF INSTALLATION OF WASHING POINT NEAR BLDG NO. P-15 (MT GARRAGE) AT 181 FD WKSP COY IN ZONE -10 AT TALBEHAT MIL STN
2025_MES_723553_1
AGE (I)/TBT/TOK-49/2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
180 days
AGE (I) TALBEHAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
AGE (I) TALBEHAT
₹36,000
Yes
19 Nov 2025
31 Jul 2025
18 Aug 2025
2 Aug 2025
16 Aug 2025
9 Aug 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .