MID/J/2024-25/46

Fabrication and installation of M.S platform with railings for clearing of the trash racks installed at intake channel of new additional bay at MRC head works Akhnoor.

Fabrication and installation of M.S platform near the bank of River Chenab at MRC head works Akhnoor for facilitating clearing of trash racks already installed on intake channel of new additional bay at MRC head works Akhnoor, approx. 20ft long and 3ft wide as working platform. Fabrication of outside frame from (50x50x6) mm M.S angle iron and then laying/welding of M.S flat 50x6mm on the frame by using of good quality of welding electrodes. The working platform should be properly fixed by way of welding of sufficient no. of M.S angle (50x50x6) mm supports as per site conditions. Job involves fabrication of the platform base from MS flat of 50x6mm size which is to be welded properly on the M.S angle supports. Anchoring/holding the whole platform by providing of M.S angle supports and by providing/fitting/welding of M.S pipes of 40mm dia., railing of M.S square bars of 16mm dia. on the whole platform for providing extra support. Welding is to be done precisely into two to three layers as required along with removal of slag before a new layer is put in place. Also painting of the M.S platform by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. Safety belts/full body harness, along with fiber ropes anchored with suitable safety mechanism on ground to be used to hold the worker/arrest free fall of worker in case of any unfortunate incident during fabrication of M.S platform over the trash racks. The worker should wear a personal floating device which may consist of a vest, jacket or full length suit. The floating device should also include one or two under-straps to be worn between the legs of the workers and also a headrest flap, to prevent slipping out of the vest. Job involves operation of DG set for fabrication work at site. Any modifications/alterations of the job if required at the time of execution may be done as per actual site conditions. The job includes cost of material, labour charges, hiring charges of safety equipment, skilled labour, cables required for temporary connections, cost of POL, tools & tackles, cost of device and other safety equipments etc. The job also includes all types of carriage charges of material and tools and tackles required at site and any other charges incurred during the execution of job.

Chargotra Trading Co.

R K Electrical and Engineering Works