Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹44.3 L+₹1.0 L (2.32%)Rejected-Finance | L2 | Rejected-Finance Highest Rate |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
ADDN ALTN TO BLDG NO T119 OF 11 TAC ADDN ALTN TO BLDG NO T44 OF 165 MH ADDN ALTN TO BLDG NO T63 T74A T80 T81 T82 T82 AND T142 OF 121 TA BN, ENTRANCE GATE OF 3 CESR AND 4003 FD HOSP AT RMS
2022_MES_559624_4
8507/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹86,000
2 Mar 2023
19 Jan 2023
15 Feb 2023
19 Jan 2023
13 Feb 2023
26 Jan 2023
19 Jan 2023 - 23 Jan 2023
Amount
B/R Portion Dismantling boarding any description fixed in any position with nails
Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings
Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed.
Dismantling of frame work timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section ® complete all as specifed and directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for.
Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed.
M&L 2nd class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed.
S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified .
All as per Item No 12 here-in-before but except sheets
S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and olaster or chicken wire lathing complate all as specified and as directed.
Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each Ditto but with shutters (without taking off shutters from the frames)
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and as directed
S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0.
S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lenght i.e. Within 20mm of the lenght indicated conforming Fe-410-W (Gde E-250 quality -A) complete all as specified and directed by Engr-in-charge..
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L RCC M-30, 1:1.5:3, type B-1,( Nominal mix) as in chajjas.
M & L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete complete .
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in roof kerb complete all as specified and directed.
M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) finished even and smooth without using extra cement.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4
M&L for mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for rolled sections as in framing for clazing and the like fixed with angles cleats and connecting plates with timber foer eaves board complete all as specified and as directed.
Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as as specfied
S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F Anodised aluminium Window or ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each
S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each
M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats all as specified and directed
S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F 4 levers brass mortices lock, vertical type, size 100mm
S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.
Supply and fixing 100mm size stainless steel butt hinges,medium weight, hot rolled complete all as specified and as directed.
Supply and fixing 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.
S & F Aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed.
Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified.
Ditto all as per item No 52 here-in-before but as in skirting over and including 10mm thick cement plaster in CM (1:4) and ditto
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.
M&L for Rendering(screed bed) 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on verticle surfaces of walls all as specified and directed
M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:3 to receive tiles etc on ceiling surfaces of walls all as specified and directed
M&L for Glazed earthenware coloured tiles 450mm x 350mm x 7mm thick, in verticle surfaces, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L rendering 15mm thick on stone or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge..
M&L for Rendering 15mm thick cement plaster in CM 1:6 on brick work/concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound @ 3% of qty of cement finished of brick or concrete work finished the surface even and smooth without using extra cement.. WPC will be measured and paid separately.
Supply only integral water proofing compound ( ISI marked )
M/L for 3 mm thick Birla white putty/JK white wall care putty on walls.
M&L preparation of newly plastered surfaces of walls & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.
M&L for preparation of new plastered surface & applying two coats of oil bound distemper (OBD) over a coat of white chalktening on wall complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
M&L one coats of OBD on old plastered surfaces of walls including preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Supply and fixing in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain.
Supply and fixing in repair 3 mm thick frosted glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain.
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.
Supply and fix 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.
Supply and fix 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.
M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed.
M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 110mm bore PVC (SWR) branch piece single (Single Y equal or unequal) complete all as specified and directed.
Supply and fixing as in replacement 75mm bore PVC (SWR) floor trap (ISI Marked), outlet with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded store aggregate) and making good the disturbed surface to match with existing complete all as specified and as directed by the Engineer-in-Charge.Make : Prince/Supreme/Finolex.
Supply and fixing 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed. Make : Leader/Audco/Zoloto.
Supply & fixing as in replacement 15mm Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing as in replacement for 15mm Stop valves fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make : Essco Cat No 513A/513B or equivalent aproved make.
S&F in repairs for 15mm dia of pipe Angle valves (concealed type),fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
Supply and fix as in replacement of 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : Essco, Cat No DLX-508 or equivalent approved make
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed.
Supply and fixing as in replacement 125mm dia brass chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed. Make :- ESSCO Cat No EOS-542A or equivalent approved make.
S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.
Supply and fixing in replacement brass chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed. Make : ESSCO Cat No A CN 1111 or equivalent approved make.
Supply and fixing as in replacement 100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed. Make: Prayag / Polytuf
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
Supply and fixing vitreous china premium/ist quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. Make: Parryware Cat No C0278 for water closet, Cat No C8071 EWC Standard for PVC seat cover or equivalent approved make.
Supply and fixing as in replacement 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. Make : Parryware Model No C-8090 or equivalent approved make of Hindware/Commander.
Supply and fixing as in repair 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and as directed. Make: Prayag Cat No : 323 or equivalent approved make.
M & L for mild steel TMT bars, 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders ,cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
Taking down reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fin and similar work
M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, shelves and like
M & L for Precast cement concrete B1 1:2:4 (20mm graded aggregate) as cover slabs for Manholes drains etc including necessary formwork all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F in repairs CP toilet paper holder as approved by GE.
S&F in repairs peg set of Six chromium plated including fixing screw Make : Prayag
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and drawing.
S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with eat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification and drawing.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards .
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm complete all as specified and as directed.
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 13 sqcm but not exc 25 sqcm complete all as specified and as directed.
Welded steel wire fabric weight not exc 4.00 kg per Sqm supplied and fixed complete to wood or steel members
S&F in repairs for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings etc.
S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work complete all as specified.
M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber framework complete all as specified and as directed.
M&L for 2mm thick decorative laminates sunmica exotic design and superior quality and durability fixed on plywood with adhesive complete all as specified and as directed
S&F magnetic catcher complete all as specified and as directed
M&L for stainless steel handles 'D' type complete all as specified and as directed.
S&F Continuous (piano) hinges, of flap width 30mm ,mild steel, bright finish or electrogalvanised complete
S&F Locks, drawer, 4 levers, brass verticle type, size 50mm complete
Drawer pulls, 4 screw plate, brass with fixed dished pull, 80mm to 100mm long complete
S&F 40mm dia, cupboards knobs fixed with nuts, screws and washer of mild steel, bright finish complete all as specified and as directed.
Material and labour for rendering 15 mm thick plaster in cm (1:4) with using water proofing compund on one side of lathing finished even and smooth with out using extra cement cpmlete all as specified and as directed.
Supply and fixing in repair 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste complete all as specified and as directed.
Material and labour for rendering 15 mm thick plaster in cm (1:6) other side one side of lathing finished even and smooth with out using extra cement cpmlete all as specified and as directed.
M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm.
All as per item No 133 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders.
S&F steel work in Grills, Gates Tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete. Note:- The cost of making the semi-circular structure is deemed to be included in the rate
S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and directed by Engr-in-charge.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia
M&L for Aplying two coat of synthetic paint (anticrosive paint) on steel surfaces over a coat of primer including Surfaces of any description, over 10cm in width or girth,not otherwise described
Supplying, fabricating and fixing wall cladding (for all height) of aluminium composite panel in metallic/ non metallic colour of approved shade made out of 3mm thick aluminium composite panel material consisting of 2mm thick mineral core sandwiched between two aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (service) coating on other face, fixed over and including base frame fabricated with aluminium square pipe of size 25mmx20mm with 1mm wall thickness in 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction and as directed.
M&L for RCC (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete.
M&L for RCC (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) as in columns, pillars, piers, posts and struts.
M&L for RCC (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. or for shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plain and n.exc 1.5m depth and getting out soft/disintegrated rock.
M&L for RCC (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
M&L for formwork to the sides of columns for fair finished surfaces of concrete.
M&L for formwork to soffits of suspended slabs, floor slabs, landings and similar work all as specified.
Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc.
Returning filling and spreading, leveling wartering and well ramming in layer n.exc 25cm insoft/ disintegrated rock.
Removal of excavated soil n.exc. 50m and deposited where directed at level n.exc. 1.5m above the storing point insoft/ disintegrated rock.
M&L for framed work as in steel gate framed and side hung incl hinges,stops hand made sliding bolt monkey tail bolts etc complete.
S&F Framed work such as grills, gratings, gate etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface.
M&L of earth filling under floor well ramming including watering as required Spreading & leveling in layers n.exc. 25cm thick
M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete
M&L PCC 1:4:8 type D-2 100 mm thick as in sub base of floor.
M&L Sand filling under floors or in foundations including watering and consolidation
M&L for rubber pressed glossy type vibro compacted precast coloured conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment
M&L Granite any type of work 20 mm thick (Table rubbed and polised) in steps,jambs,pillar, window cills cooking plateform and like in CM (1:4) including pointing in (1:2) using marble dust with admixtures of pigment to match with shade of granite.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
Taking down carefully by unscrewing from fittings any type such as ceiling fittings, bulk head fittings, tube light fittings etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse).
Taking down carefully storage water heater by unscrewing and refixing the same on its original position and testing on completion complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm (nominal area) pvc insulated and un-sheathed single core FR-LSH copper cable 1100 Volts grade with multistranded copper conductor in and including PVC Concealed conduit of suitable size / double locked casing & caping as per site requirement , provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including metal flush box for mounting modular switches / sockets / regulators/modular frame etc. of suitable size as required at site complete all as specified and as directed and including necessary cutting chase of wall and making good to match with existing surface complete for Make of wire : Richa/RR Kabel/Finolex Make of PVC Conduit: Supreme/ Ori-Plast/ finolex
One light/Fan/Exhaust point controlled by one, one way switch .
One Call Bell point controlled by one, one way switch .
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 164 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
All as per item No 164 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module Make : Havells/Legrand/Anchor
M&L for modular switch 1 way 16A, 1 module Make : Havells/Legrand/Anchor
M&L for Modular Socket ,6A/2/3 pin combined 2 module Make : Havells/Legrand/Anchor
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module Make : Havells/Legrand/Anchor
M&L for Modular Bell push 6A 1 module Make : Havells/Legrand/Anchor
M&L for Bell Multi Music type Make : Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator,120 W-2 module Make : Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator,100/120 W Make : Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal
S&F for White cover plate with frame 2 Module complete all as specified and directed.
S&F for White cover plate with frame 3 Module complete all as specified and directed.
S&F for White cover plate with frame 4 Module complete all as specified and directed.
S&F for White cover plate with frame 6 Module complete all as specified and directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Richa/Prestoplast/Finolex/supreme
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make : Crompton/Havells/Bajaj
S&F for,1x20 Watt LED tube light fitting wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed.Make : Havells/Crompton/Bajaj/Philips
All as per item No 183 here-in-before but 9 watt LED, 2' batten. Make : Havells/Crompton/Bajaj/Philips
Supply and fix Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED suitable for B22 Base including two Nos of Lamps Red and Green all asspecified and directed by Engineer-in-Charge. Make : Havells/Crompton/Bajaj/Philips
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells/Crompton/Bajaj/Philips
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.reaves Make : Havells/Crompton/Bajaj/Philips
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.Make : Havells/Crompton/Bajaj/Philips
Supply and fixing LED flood 70 watt 230 V AC outdoor with thermal magnet in multipple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp bracket all as specified and directed by Engr-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and as directed. Make : Bajaj/CG/Orient
M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
Supply and fixing MCB SPN 40-63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/ABB/Siemens
Supply and fixing MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/ABB/Siemens
Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make:
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make : Legrand/ABB/Siemens
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
M&L for Switch piano flush type single pole, one way 5 Amp. Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A flush type Make:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed.
M&L for replacement Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long of complete all as specified and asd directed.
M&L for replacement Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two complete all as specified and as directed.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 2 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to requirred thickness complete all as specified and as directed. (Note: Thickness of sand cushioning after punning down shall be measured for payment purpose)
Rameshwar Prasad
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .