Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹70.6 L
EMD Value
₹1.4 L
Closing Date
14 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Renovation of Wash Room Toilets Blocks of Schools of East Primary and High School, HAL Gnana Jyothi School and HAL Public School located at HAL Township, HAL Bangalore.
9928
TENDER NOTICE/NCP/31/24-25/01
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.4 L
14 Oct 2024
30 Sept 2024
30 Sept 2024
14 Oct 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10 km distance from HAL, etc., all complete as directed by Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, etc., in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.
Returning / filling available excavated earth (excluding rock) in trenches, plinths, sides of foundation, etc., in layers not eceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and for lift, etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge.
Brick work with 230mm thick common burnt clay machine moulded modular bricks of class designation 7.5 in brick work above plinth level including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by the Engineer-in-Charge.
Half brick masonary with common burnt caly F.P.S ( Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for urinal partitions,platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., complete at all levels as per direction of Engineer-in-Charge.
Providing and fixing of 1 st quality Ceramic glazed wall tiles (Light / dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black , in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30Kgs per Sq m, including pointing in white cement mixed with pigment of matching shade of any size as approved by EIC, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing expansion hold fasteners on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., all complete as directed by the Engineer-in-Charge.
Fastener with threaded dia 6mm
Fastener with threaded dia 10mm
Providing and fixing Hard wood (SAL) for frames of doors, windows, hand rails, frame work for partitions, etc., cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by the Engineer-in-Charge. (Fastners / hold fasts / SS Screws to be paid separately)
Providing and fixing factory made uPVC door frame made of uPVC extruded sections [42 X 50]mm having an overall dimension as below (tolerance±1mm), with wall thickness 2.0mm (± 0.20mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size [19 X 19]mm and 1mm (± 0.10mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame, etc., complete as per manufacturer’s specification and direction of Engineer in-Charge.
Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size [59 x 24]mm and wall thickness 2mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size [75 x 220]mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size [20 x 20]mm and 1mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size [100 x 24]mm and 2mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, ect., complete as per manufacturer's specification and direction of Engineer-in-Charge.
Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.10Sq m with 6mm thick clear heat strengthened glass, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing bright finished brass 100mm mortice latch and lock with min. 6 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves wherever necessary, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing 5.0mm thick glass panes for doors, windows and clerestory window, ventilators (weight not less than 12.50Kgs / Sq m), including cutting and finishing as per site requirement, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing aluminium tower bolts of size [250 X 10]mm , ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-in-Charge.
Providing and laying Glazed vitrified floor tiles Matt / Antiskid finish of Size [600 X 600]mm as indicated below for Paper Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kgs / Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Single socketed pipes of 75mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.
Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by the Engineer-in-Charge.
Plastering to ceiling with 12mm thick on the rough side with cemnet mortor (1:4) including leveling, curing and making the level smooth and at all heights and execute the work complete, etc., all complete as directed by the Engineer-in-Charge.
Plastering to external brick / block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by the Engineer-in-Charge.
Providing and finishing old walls in two or more coats with Premium C47 Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43Ltr / 10Sq m over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by the Engineer-in-Charge.
Providing and Finishing walls with Acrylic Smooth exterior paint for new/old wallsof required shade for New work (Two or more coat applied @ 1.67Ltr / 10Sq m over and including priming coat of exterior primer applied @ 2.20Kgs / 10 Sq m) including scrapping, preparationof surface for completing the work, etc., all complete as directed by the Engineer-in-Charge.
Providing and applying synthetic enamel paint for wooden / steel surface with one or more on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, filling joints, patti, etc., all complete as directed by the Engineer-in-Charge.
Dismantling 15 to 40mm dia G.I. / CPVC pipe including stacking of dismantled pipes (within 50metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as directed by the Engineer-in-Charge.
Dismantling W.C. Pan / Closets / Urinals / Wash basins etc of all sizes including disposal of dismantled materials i/c malba, making temporaray arrangements for blocking service lines to avoid water leakages, etc., all complete as directed by the Engineer-in-Charge.
Repair to plaster of thickness 12mm to 20mm in patches of area lesser than 2.50Sq m including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, without causing hindrance / protecting the existing floor finish work, etc., all complete as directed by the Engineer-in-Charge.
Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level, etc., all complete as directed by the Engineer-in-Charge.
Providing & fixing White vitreous china Orissa pattern water closet squatting pan of approx size [630 X 450]mm or nearest available size along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, etc., all complete as directed by the Engineer-in-Charge.
Demolishing brick work with cement mortar manually / by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 50m, etc., all complete as directed by the Engineer-in-Charge.
Demolishing cement concrete manually / by mechanical means including disposal of material within 50metres lead as per direction of Engineer - in - Charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix) and including stacking material and disposal of dismantled materials up to a lead of up to a lead of 50m after making temporary proetction for existing service lines, etc., all complete as directed by the Engineer-in-Charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50metres lead of area 3Sq m and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any, etc., all complete as directed by the Engineer-in-Charge.
Dismantling / removing tile work (for thickness of tiles 10mm to 25mm) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any, including stacking material and disposal of dismantled materials up to a lead of 50m, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size [630 x 450]mm fixed with with C.I. brackets / rack bolts, single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, including PVC waste pipe of with waste fittings of 40mm dia and make it function of approved brand / make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing 8mm dia C.P. / S.S. Jet (Health Faucet) with flexible tube upto 1metre long with S.S. triangular plate on walls / Eureopean type W.C. material of approved make and quality, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of [430 x 260 x 350]mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, etc., all complete as directed by the Engineer-in-Charge.
Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.
Constructing masonry Chamber [60 x 60 x 75]cm inside or outside (or approx. size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, etc., all complete as directed by the Engineer-in-Charge.
Constructing masonry Chamber [120 x 120 x 100]cm inside or outside (or approx. size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, unions, collars, bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by the Engineer-in-Charge.
15mm dia
20mm dia
25mm dia
32mm dia
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms (or nearest availabe size and weight), etc., all complete as directed by the Engineer-in-Charge.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000Litres capacilty , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing C.P. brass long/pillar body bib cock of 15mm nominal bore, approved quality conforming to IS standards and weighing not less than 690gms, etc., all complete as directed by the Engineer-in-Charge.
Supply and Making connection of drain pipes of 100 to 250mm diameter or sewer line with existing manhole including breaking / cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by the Engineer-in-Charge.
Dismantling of old S.W. pipes of 100mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unserviceable materials into municipal dumps and making temporary arrangements to protect / countinue ongoing service lines of other floors, etc., all complete as directed by the Engineer-in-Charge.
Rupees Fifty Two Lakh Ninety One Thousand Four Hundred and Forty Four Paise Only
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Lighting Point wiring
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. (Group B wiring)
Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.(Group B wiring)
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.(Group C wiring)
Power point Wiring
Wiring to flush type 3 pin 6A common Power socket outlets in the switch boar in concealed wiring system using suitable size 2mm thick rigid 25mm dia PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 2.5 Sq.mm for phase and neutral and 1 run of 2.5 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 6A, 250V gr. power socket outlet & 6A, 250V gr. flush type modular SP switch including necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Wiring to flush type 3 pin 6A independent Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid 25mm dia PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 4 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 6A, 250V gr. power socket outlet & 6A, 250V gr. flush type modular SP switch including necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Wiring to flush type 6/16A Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid 25mm dia PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 4.0 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 6/16A, 250V gr. power socket outlet & 16A, 250V gr. flush type modular SP switch with neon indicator including necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Wiring to submain ckts/Lighting ckts
3 x 2.5 sq. mm from DB to Switch Board
Removing of existing tube light fititngs- 80 to 90 Approx Nos at various schools ( HAL Gnanajyoti school, HAL east primary school & HAL Public school) and handing over to electrical dept, FMD
Removing of existing exhaust fan -30 to 40 Nos at various schools ( HAL Gnanajyoti school, HAL east primary school & HAL Public school) and handing over to electrical dept, FMD
Removing of existing conduits including wires - 700 to 800 Approx Mtrs at various schools ( HAL Gnanajyoti school, HAL east primary school & HAL Public school) and handing over to electrical dept, FMD
Rupees Six Lakh Ninety One Thousand Three Hundred Twenty Four and Seventy Nine Paise Only
Rupees Fifty Nine Lakh Eighty Two Thousand Seven Hundred Twenty Five and Twenty Four Paise Only
Approximate Amount Put to Tender
Rupees Ten Lakh Seventy Six Thousand Eight Hundred Ninety and Fifty Four Paise Only
Rupees Seventy Lakh Fifty Nine Thousand Six Hundred Fifteen and Seventy Nine Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN31.pdf
TENDER_DOCUMENT • 1.23 MB
65PQF.xlsm
TENDER_DOCUMENT • 0.04 MB
65PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
ElectricalTenderDrawing1.pdf
TENDER_DOCUMENT • 0.16 MB
ElectricalTenderDrawing2.pdf
TENDER_DOCUMENT • 0.06 MB
ElectricalTenderDrawing3.pdf
TENDER_DOCUMENT • 0.18 MB
65Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
65ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
65Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
65PB.pdf
TENDER_DOCUMENT • 0.38 MB
65PQ.pdf
TENDER_DOCUMENT • 0.21 MB
CivilTenderDrawing.pdf
TENDER_DOCUMENT • 0.28 MB
65TB.pdf
TENDER_DOCUMENT • 3.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .