PROVN OF 5 X SQUAD POSTS AND 01 X CENTRAL LECTURE POST ALONG WITH COVERED SHED AT TRAINING AREA OF THE GRC JABALPUR UNDER GE(WEST) JABALPUR

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in all kind of Soil complete all as specified and directed .

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, in all kind of soil complete all as specified and directed .

M&L for PCC (1:2:4) Type B-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete etc complete all as specified & directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removal surplus soil from other site, exc. 500 m but n exc. 1.50 km and depositing, spreading and levelling in layers n exc. 25 cm thick & well ramming including watering as required complete all as specified and directed .

M & L RCC- M-25 (Design Mix) using 20mm graded crushed stone aggregate for Foundation ,plinth beam including rafts as Mass Concrete complete all as specified and directed .

Form work to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, vertical or to batter, rough finished surfaces of concrete complete all as specified and directed .

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia and over as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M & L RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate for Column complete all as specified and directed .

Form work to sides of pillars, posts, struts, piers, column and stanchions, square, rectangular or polygonal, for rough finished surfaces of concrete complete all as specified and directed .

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed .

M & L RCC- M-25 (Design Mix) using 20mm graded crushed stone aggregate for Roof Beam ,coping etc complete all as specified and directed .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed .

M&L for 10mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.

M & L 15mm Thick Cement Plaster on external surfaces of wall in Two Coats - 10mm Thick Backing Coat in CM (1:6) & 5mm Thick Second Coat in CM (1:4) mixed with liquid water proofing compound, finished even & smooth without using extra cement complete all as specified and directed . ( Note : Liquid Water Proofing Compound shall be measured and paid for separately as "Supply only".)

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Hardcore of guage n exc 63mm of broken stone aggregate, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed.

M & L 100mm Thick Cement Concrete (1:4:8), Type D-2, (40mm graded crushed stone Aggregate) as in sub-base of Floor complete all as specified and directed .

M & L 100mm Thick Cement Concrete (1:2:4), Type B-1, (20mm graded crushed stone Aggregate) as in sub-floors complete all as specified and directed .

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM(1:4) complete all as specified and directed .

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee angle, channel or flatsections) including distance pieces cleats etc conforming to Fe 410W (GdeE- 250) quality 'A' including painting with one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop before fabrication complete all as specified and directed .

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

Tiki Water proofing Co

C L BHATIA