REPAIR OF WOODEN FURNITURE, SOFA SETS AT FURNITURE YARD UNDER BSO OF GE JAIPUR

Amount

Teapoy wooden (1.01 to 1.03) : Removing following old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak wood) size, shape & design as shown on drg . All new surfaces shall be two coat of french polish with high gloss finish.including tightening the joints by pinning, screwing, nailing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-278, 382

Side rail

Front/back rail

Table 3'x2' with or without drawer (2.01 to 2.07): Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be painted with two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. FD-283, 284

Front/rear rail

Side rail

Middle stiffeners

Side stiffeners

Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm).

Side members of drawer

Table 4 x 3 (3.01 to 3.03): Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, All new surfaces shall be painted with two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. FD/MAP-II/-03

Front/back rail

Side rail

Table dining 6 person (4.01 to 4.03): Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be painted with two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-239, 269, 273, FD/Map-II/03

Front/ back rail

Side rail

Table dining 8 person (Item No 5.01 to 5.03) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-239,FD-273,FD-376

Front/back rail

Side rail

Table writing (Item No 6.01 to 6.07) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood ) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-249, 275

Front/ back rail

Bottom base of box 18mm thick commercial particle board (ISI marked)

Back ply box 6mm thick commercial ply (ISI marked)

Front door 18mm pre-laminated particle board including hinges piano type continuous.

Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm .

Knobs 50mm of chromium plated of approved coloured and standard quality.

Table 3x3 (7.01 to 7.02) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-88M, 291

Front/side rail

Table Peg (8.01 to 8.04) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-25, 277, 384, 236

Front rail

Side rail

PVC Shoes (4 nos in one chair)

Table Centre (9.01 to 9.04) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-274, 134(M), 235,267,393

Front/rear rail

Side rail

PVC Shoes (4 nos in one chair)

Chair WB (10.01 to 10.07) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-285

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

S&F Plywood 6 mm thick BWR grade ISI marked as per drg

Chair Easy with cusioned (11.01 to 11.08) : FD-358

Taking out unserviceable seat of Chair Easy cusioned and S&F new seat 12mm, teak ply with ploy urethane foam 75mm thick moulded with density 40 Kgs per cum with rexine of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair Easy cusioned and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with rexine of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

S&F in repair Stiffener

S&F in repair Front/Side/ rear rail

S&F in repair Back Support

S&F in repair Front leg

S&F in repair Rear leg

S&F in repair PVC Shoes (4 nos in one chair)

Sofa Set (12.01 to 12.06) : FD-373, 281 Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

Side planks of sofa seat

Bottom planks of sofa set

Handle of single seat

Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.250/Mtr

Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing. Tapestry cloth should not be less than Rs.250/Mtr

Sofa set Satee type 6'6'x1'6'. (Item No 13.01 to 13.05) (Drawing - TP)

Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 1980mm mm x458 mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing u/s Front rail new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

All as per Item No 13.02 above but back rail

All as per Item No 13.02 above but leg

All as per Item No 13.02 above but Handle of sofa seat

Sofa set sette type 5'x1'-6". (14.01 to 14.05) : (TP)

Removing the existing unserviceable cushion and S&F new 100mm thick cushion of 'cool' foam of 40 density 1524 mm x458 mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing u/s Front rail and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

All as per Item No 14.02 above but back rail

All as per Item No 14.02 above but leg

All as per Item No 14.02 above but Handle of single seat

Sofa Set three seater enthic (15.01 to 15.05) : TP

Removing the existing unserviceable cushion and S&F new 100mm thick cushion of 'cool' foam of 40 density 1930 mm x635mm mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

All as per Item No 15.02 above but back rail

All as per Item No 15.02 above but leg

All as per Item No 15.02 above but Handle of single seat

Sofa Set single seater enthic (16.01 to 16.05) : TP

Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of U foam of 40 density 711 mm x635mm mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

All as per Item No 16.02 above but back rail

All as per Item No 16.02 above but leg

All as per Item No 16.02 above but Handle of single seat

Sofa Set single seater enthic (17.01 to 17.05) : TP

Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 1250 mm x635mm mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

All as per Item No 17.02 above but back rail

All as per Item No 17.02 above but leg

All as per Item No 17.02 above but Handle of single seat

Dinning Chair enthic (Item No. 18.01 to 18.03) : TP

Removing the existing unserviceable seat cushion and replacing with new100mm thick cushion of U foam of 40 density 460 mm x 460mm mm covered with best quality of tapestry cloth front and back Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

Removing the existing unserviceable back cushion and replacing with new100mm thick cushion of 'cool' foam of 40 density 710 mm x 510mm mm covered with best quality of tapestry cloth front and back Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr

S&F in repair leg

Table Bed Side (Item No. 19.01 to 19.03) : Removing u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-248,FD-276

All as per Item No 19 above but Top/ middle/ bottom shelf

All as per Item No 19 above but Sides pane including legs

Side board (Item No. 20.01 to 20.05) : Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-241, 371, 372

Back side 6mm thick commercial ply wood (ISI marked)

Shutter fixed with piano type hinges continuous 20mm.

Top base

Sides pane including legs

S&F in repair Knobs 50mm of chromium plated of approved coloured and standard quality.

Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm thick ply fixed at back and Teak ply all three side. FD-251,378,

Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm thick ply fixed at back and with MDF Board all three side. FD/E6/MAP/16

Table dressing gents: All as per item No 21.00 above but Removing existing U/S mirror with ply and S/F new mirror 5.5 mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm ply on back. FD-230,379

Polishing description (Item No 24.01 to 24.19) : M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing

Teapoy wooden FD-278,382

Table 3'x2' with drawer FD-284

Table 3'x2' without drawer FD-283

Table dining 4’ x 3’. FD-273

Table dining 6 person FD-239, 269, 273, FD/Map-II/03

Table dining 8 person FD-239,FD-273,FD-376

Table writing FD-249, 275

Table 3x3 wooden FD-88M, 291

Table Peg FD-25, 277, 384, 236

Table Centre FD-274, 134(M), 235,267,393

Chair WB without arms FD-285

Table Bed Side wooden FD-248,FD-276

Side board FD-241, 371, 372

Bed with plytop

Table dressing (Ladies) FD-251,378,

Table dressing gents FD-230,379

Sofa set 5 seater. FD-281, FD-373

Sofa set 4 seater. FD-281, FD-373

Dinning Chair enthic Drawing : TP

Replacement of TOP (25.01 to 25.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated particle board exterior quality including 4mm thick teak wood edging al- around the top duly polished size shall be as shown on drg and as directed.

Teapoy wooden FD-278,382

Table 3'x2' with or without drawer FD-284

Table dining 4’ x 3’. FD-273

Table dining 6 person FD-239, 269, 273, FD/Map-II/03

Table dining 8 person FD-239,FD-273,FD-376

Table writing FD-249, 275

Table 3x3 FD-88M, 291

Table Peg FD-25, 277, 384, 236

Table Centre FD-274, 134(M), 235,267,393

Bed with plytop (Item No. 26.01 to 26.06): Removing following unserviceable / broken parts and S&F first class hard wood (Teak wood) new parts complete all as specified and shown on drgs shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. FD-246 & 247

Head board alongwith the legs

Footboard alongwith the legs

Centre stiffeners

Long rail for following size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-Charge

Short rail

Ply wood of size 1950x900x12mm commercial BWR complete all as directed.

S&F ‘L’ type bracket of size 75mm x 75mm x 20mm and 2mm thick of Mild steel falt iron fixed with screws complete all as required and directed.

Schedule of Credit

shekhar & company

B.S Constructions

M/S Shri Balaji Enterprises

AJAY TRADERS