SPL REPAIR TO EXISTING BDY WALL AT FAFA ASC LINE (RWA), SPL REPAIR TO OVER HEAD WATER TANK WITH CAP OF 1200 LTRS OF STATIC WKSP EME AND PROVN OF INTERLOCKING PATH WAY AND FOOTH PATH AT JCO SINGLE LIVING ACCN AT BLDG NO-74, 75 AND 76 OF DEMO BN UNDER

Amount

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

M & L for Removing excavated material exc. 50m but n exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation. Filling & mass concrete complete all as specified and directed.

Taking down cement or lime plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed.

M&L for brick work with sub class 'B' flyash brick straight or curved on plan exc 6 m mean radius (Clay burnt bricks) built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, and surfaces finished even and fair complete all as specified and directed.

Description all as per ser item No. 7.00 above but other than fair faces of brickwork complete all as specifed and directed.

Material & Labour for applying Two coats of acrylic emulsion paint, Alkali & fungal resistance, dirt resistance exterior (Weatherproof)paint of required shade over and including priming coat of exterior primer over new/Old surfaces complete all as specified & directed.

M & L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, Copings,piers, posts and struts complete all as specified and directed.

M & L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed.

M & L for Form work to sides of columns and similar work with rough finished surface complete all as directed.

M & L for Form work to sides of beams and soffit with rough finished surface complete all as directed.

M & L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Description all as per ser item no. 16.00, but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders complete all as specified and directed.

M&L for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M & L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxied primer complete all as specified

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specifed and directed.

M&L for Concertina coils with Diameter: 600mm having High tensile galvanized steel Core Wire Diameter: 2.5 mm ,Tensile Strength: Minimum 1350 N/mm² Zinc Coating: Minimum 275 g/m² Conforms to ASTM A 641 Class 3 or equivalent standard with Razor Blade of High carbon steel or stainless steel. Blade Thickness: 0.5 mm Blade Length: 25 mm Blade Width: 15 mm Blade Type: Sharp, pointed, with notches for secure attachment, Weight per bundle: 8kg to 15kg Length of each coil: 5m to 6m No. of spiral rounds in a coil: approx. 15 nos installed over a Y-shaped angle placed at a regular interval of 2.5m to 3.0m. The material used for concertina coils should be hot dip GI wire.

Excavating in trenches, in soft/ loose soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Cutting/ chipping the spalling concrete surfaces of Columns, beams, slabs, cantilevers etc., and trimming, cleaning the surface to receive guniting/ plastering all as specified and directed.

Applying epoxy treatment for bonding new & old concrete surfaces prior to guniting applying NITO BOND AR chemical (FOSROC chemical ) all as specified by manufacturer instructions.

M & L Providing pressure guniting averaging 40 mm thick in cement mortar 1:3 for columns/ fins including providing double scaffolding as required and removal of the same on completion of the work and all as required and directed

M & L Providing pressure guniting averaging 30 mm thick in cement mortar 1:3 for beams including providing double scaffolding as required and removal of the same on completion of the work and all as required and directed

M & L providing pressure guniting averaging 20 mm thick in cement mortar 1:3 for soffits of slab, complete all as specified and directed including providing double scaffolding as required and removal of the same on completion of the work.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement including scafolding where necessity complete all as specified and directed.

M&L for Rendering 5 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement including scafolding where necessity complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of cement based paint complete all as specified and as directed. Note : Rate shall be included for necessary scaffolding and safety measures where required at site

Material and Labour for applying Two or more coats of 100% Premium exterior acrylic emulsion paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 liter/10 sqmover and including priming coat of exterior primer applied @ 0.90 litre/10sqm Note- (i) contractor shall furnished guarantee four years againts service rendered) (ii) primer and emulsion tobe carred out through air less spray machine mechanical means Note : Rate shall be included for necessary scaffolding and safety measures where required at site

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

M & L pre-painted galvulume aluminium zine coating GI based profile steel sheet 0.50mm thick on colour having tensile strengh of 550 mpa as in roof covering / cleading to wall, fixed with self tapping screws complete all as specifed and directed.

Surface excavation n.exc.30cm deep and averaging 7.5cm deep & getting out in any type of soil complete all as specifed and directed.

M&L for 150 mm thick hardcore with broken stone of gauge n.exc. 63mmm deposited , spread and levelled in layers n.exc., 15CM thick, watered and rammed to a true surface.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of floor etc. Complete all as specifed and directed.

M&L for 20 mm thick screed bed or bedding layer with CM 1:4 as in base for laying chequered tiles complete all as specifed and directed.

Material and Labourfor chequered cement concrete tiles 40cm x 40cm x25 to 30cm thick (Glosy finished) with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specifed and directed.

M/s Gupta Constructions (BID ID -3442562)

M/S UnitedConstruction (BID ID -3441703)

Vinayak Trading House (BID ID -3436881)