RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Tractor Trailer Mounted Suction Machine ( 2 pieces ) Technical Specifications 1/8 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Trailer confirming to IS 8213:2000 (latest) and AIS 112 (latest) Yes * Conforming to IS:13496 for Suction Machine for cleaning Sewers
RequiredManholes and ancillary structures provided on sewer line and closed storm water drains Yes * Necessary clearance from RTO to be obtain before supply of Trailer mounted Suction cum Jetting Machine Yes * Form 22 A - For compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR Rules Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps
Requiredvacuum pumps
Requiredpower takeoff unit
RequiredJetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab To be furnished to buyers on demand Yes * Avaliability of Test report fron approved Laboratory to prove conforming to specification as per AIS 112 for trailers to be furnished to buyer on demand Yes * Generic Parameters Type of Trailer mounted machines Suction * GVW of Trailer 2000 More than 2000.0 Or higher Wheel base 1250 More than 1250.0 Or 2/8 higher Payload capacity of trailer 4000 More than 4000.0 Or higher Make and Model of Vacuum Pump - * Make and Model of PTO - * Make and Model of Hydraulic Motor - * Make and Model of Hydraulic Pump - * Make and Model of Suction Hose - * Mount Type Tractor Trailer mounted * Constructional Parameters Capacity of split shaft PTO (Kgm) 170 170 Overall Length 5080 More than 5080.0 Or higher Overall Width 1780 More than 1780.0 Or higher Equipment Length 5080 * Equipment Height 2080 * Equipment Rear Over Hang Yes * If Yes
RequiredDeclare Equipment Rear Over Hang 0 * Derrick Arm Available No No Vacuum Pump - Rotary Vane/Sliding Vane Yes * Vacuum Pump Flow (Cu-m/hr) 435 More than 435.0 Or higher Vacuum Pump Power 25 * Rated RPM at Max Pump power 1300 * Vacuum Relief Valve Size 40 * Vacuum Suction Depth (as per IS:13496 latest) 9 More than 9.0 Or higher Suction Hose - Lightweight
Requiredheavy duty
Requiredreinforced
RequiredPVC along with quick connect coupling arrangement Yes * 3/8 Suction Hose Internal Diameter (as per IS:13946 latest) 70 70.0 Suction Hose Length 3 More than 3.0 Or higher Number of Suction Hose (Nos) 5 More than 5.0 Or higher Safety Equipments - * Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and injection cooling air Inlet Silencer/Filter Yes * Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * Total Tank Capacity (sludge tank+water tank) 3000 3000.0 - 8000.0 Or higher Water storage Tank Capacity 500 More than 500.0 Or higher Sludge Storage Tank capacity 2500 * Thickness of tank plate (It shall be designed at a safety factor of 4 times the operating pressure)as per IS 13496 6 More than 6.0 Or higher Material of tank Mild Steel (Grade-A) Confirming to IS 2062 latest * Surface preparation and finish of tank's Exterior - sanded prior to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Yes * Surface preparation and finish of Tank's Interior - clean water Yes * 4/8 two coats anti corrosive primer & two coats of grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Provision for locking and unlocking arrangement of rear gate of tank
Requiredto be operated hydraulically for quick tipping and cleaning Yes * Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) - * Water Level Indicator Nos 2 * Thickness of Cover for Engine
RequiredPump and Hose Reel compartment 3.2 More than 3.2 Or higher Material of Cover for Engine
RequiredPump and Hose Reel compartment MS Sheet MS Sheet Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air Pump - * Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction Yes * 5/8 line Lubricating system for reducing friction loss Yes * Three sewer cleaning nozzles with varying rearward angles Yes * One nozzle extension for easy fixing of the hose and the nozzle Yes * Two stop tank strainer elements Yes * Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Performance Parameters Warranty Time 30 More than 30.0 Or higher Warranty Distance 800 * No of Free Service (with consumable) 6 * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
