SPECIAL REPAIRS AND ADDITION / ALTRATION TO BUILDING NO P2, P8, SINGLE OFFICERS ACCOMODATION AT NOM VARUNA AND PROVISION OF HEALTH FAUCET IN SAILORS MARRIED ACCOMODATION AT PALAM BAGH IN THE AOR OF AGE B/R NAVY UNDER GE NEW DELHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

S&F Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exc 0.18 Sqm not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:3 on wall complete in all respect as specified.

M and L Granite (of any type) tiles 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radious built in CM 1:4.

M&L 15 mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement all as specified. (including on new brick surfaces)

M&L Rough excavation n exc 1.5m deep in hard / dense soil and getting out

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L Removing excavated Soils exc. 250 m but n exc. 500 m and depositing where direc-ted

M&L Cement concrete in foundations, filling and mass-concrete type B2 (1:2:4) 40 mm graded aggregates

Demolittion of brick work built in CM and Cement Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete in all respect as specified.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

S&F Framed work as in doors or gates of angle or other section Fe-410-W (Gde-E-250) Quality A, with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; nuts and bolts washers etc, also fastening and fixing complete (Work to be executed upto G+3)

Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

M&L Preparation of newly plastered or unplastered surface and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) all as specified.

S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet reinforced with MS sqare tube used as per specifications and drawings

Supply and fixed Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing

Dismantalling of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete in all respect as specified

Cutting openings, through brick walls built with of cement concrete for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective rick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F stainless steel plate rack of size 44" x 24" x 48" with silver colour, 4 shelves, modern appearance, wall mounted / stand mounted complete all as specified. (Including all necessary accesseries required for fitting like Fasteners, nuts, bolts washers, screws, angles, stand etc;

M&L Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat.

M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

S & F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

M&L 10 mm thick polymer modified plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

M&L Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint.

M&L two coat of synthetic enamelled paint over a coat of primer in any approved pattern and colour including preparation of New surfaces of wood exceeding 10cm width or grith not other wise provided

M&L preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint.

Supply and fixing of 10mm thick polycarbonate sheet to cover the shafting area and roof covering upto full height of building ( Approx 15 m), Weight of polycorbonate sheet 1.75 kg. per Sqm, colour as approved and fixed with self -taping screws as required at site and sealing the joints with liquid sealent complete all as diercted and specified. Make : Duratuff, Lexan, VMT Paste Ltd, M/s Coxwell Domes Engg Pvt. Ltd.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building.

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all othersaftey precautions complete all as specified and directed.

S & F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

supply Liquid water proofing compound

M & L Brushing neat cement slurry with 3.0 kg of cement per sq meter (For Sunken floor)

M & L Rendering 10mm thick on concrete surfaces in CM 1:3 over roof finish surface even and smooth without using extra cement with water proofing compound (water proofing compounf shall be measured seperately.)

M & L Cement concreteType D 2 1:4:8 ( 40 mm graded aggregates ) in foundations, filling and mass-concrete

S&F in repair 15mm bore dia Stainless Steel finish angular two way stop cock / Bib Cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge.

S&F chromium plated AVS health faucet Jet spary for water closet including 15mm bore PVC connecting pipe 1.2m long with check nut and washers all as specified .

Cutting existing steel tubing for alterations or additions (each cut measured)

Screwing existing steel tubing for alterations or additions (or length- ening screw on pipe to form connector)

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified

M&L for non skid ceramic tiles 7-8 mm thick coloured(square /rectangular) exc 0.11sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : KUB-35041

Supply and fixed in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : FLR-5169

Supply and fixed in repair 32mm bore dia CP finish copper alloy bottle trap heavy complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code - ALD-769B

Supply and fixed in repairs chromium plated finish paper holder complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : : AKB-35753 or equivalent in GEM/MARC.

Supply and fixed in repairs 600 mm long C P finish CP Towel Ring Square complete in all respect as specified and directed by Engr-in-Charge. Make:- Jaquar Code : CAN-1121N

S&F in repairs vitreous china wash hand basin counter top type of size 705mmX450mmx200mm in 18 mm thick granite (of any type) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete in all respect as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 915mmx460mm bowl size 410mmx330mmx160mm.

S&F in repair CP Wall mixer (wall mounted model ) 3-1 system (Code: VTG-9281) with provision for telephonic shower and overhead shower complet with 115mm long pipe connecting legs and flanges. Hand shower (Code : HSH-1721) 105mm dia round shape multi flow with air effect (ABS body & face plate crome plated) with rubbit cleaning system and over head shower 105mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubbit cleaning system Code (Code : OHS-1709) and with shower arm 20mm x 600mm long round shape for wall mounted shower with flange jaguar

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : COMMANDER/PRAYAG/JINDAL

S&F in repairs CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as directed

Supply and fixed peg set of 6 fixed with rawal plug make ;- Prayag Cat no BEA-30

S & F Stainless steel Double Soap Dish with tumber holder

S&F in repairs 20 mm dia 18 gauge mild steel conduit pipe including PVC coating over it of required length for curtain rods including side brackets complete all as directed

S & F Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repairs G I wire cloth 0.56 mm nominal dia or wire and an average width aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple etc complete all as directed.

S&F corner shelf 200mm size 5mm thick toughened glass make :- Paryag Cat no BEA 48

S & F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm

Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

S & F 20 mm dia Brass Elbow

S & F 20 mm dia Brass Elbow (3/4 x 1/2)

S & F Union 16 / 20 mm

S & F 20 mm dia Brass Tee

Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fitings by burning out lead joints etc

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes 5 mm thick single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash / Supreme

S & F 75 mm dia PVC (SWR) pipes 5 mm thick single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash / Supreme

S & F 110 / 75 mm PVC (SWR) bends any radius

S & F 110 / 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal

S & F 110 / 75 mm PVC (SWR) junction single, (Single T) equal or unequal

S & F 110 / 75 mm PVC (SWR) Couplers

S & F 110 / 75 mm PVC (SWR) reducers

S & F 110 / 75 mm PVC (SWR) Cowl

S&F 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry Make Prayag,

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

S&F in repairs 20mm bore gun matel globe or with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

S&F high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq. m each all as specified.

S and F Solid PVC Door Frame of size 50mm x 47 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings

S&F 35mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats all as specified and directed.

S&F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring,

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F in repairs Exhaust fan louvers 230/300 mm size, iron including taking out old louvers up to fourth floor complete all as specified. Note :- Staircase arrangement for fixing louvers up to fourth floor will be made by contractor

S&F Power coated aluminium anodised ventilator aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : QQT-7053

S&F in repairs chromium plated AVS health faucet Jet spary for water closet including 15mm bore PVC connecting pipe 1.2m long with check nut and washers all as specified .(Make : ZIM/PARKO/JAGUAR/SEIKO

Supply and fixed chromium plated finish paper holder complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : : AKB-35753 or equivalent in GEM/MARC.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including sheet cover

S and F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern.

S&F in repair stain less steel curtain rod 25 mm dia with two nos stainless steel brackets and stainless steel end caps, fixed on wall with nylon sleeves and screws complete all as specified.

S&F Stain less steel plate rack made of stainless steel 1mm thick 900mmx 600mm

M & L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:4,

Ditto all as per item no 120.00 but in skirting only ditto

Dismantling water tanks and S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet as specified & directed Engr-in-Charge.

S & F in repairs ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified.

M&L providing cement concrete type E-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling etc complete all as specified.

M&L providing cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub floor/sub base for laying floor finishes/ tiles etc

M&L Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified. Note :- Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land. Note :- Water proofing compound to be mixed with neat cement slurry and apply in two coats (for sunken floor) Note :- Staircase/Scaffolding arrangement where required up to fourth floor will be made by contractor

M&L in Addition of point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provn of new galvanised MS Modular box and new Modular sheet of suitable size, ISI marked for housing the switches and sockets, for the following :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

S&F in Addition modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating :-

SP 6 Amp rating Make:-Legrand/Indoasian/Havells

S&F in replacement modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating including taking down of switches of any capacity for taking credit complete :-

SP 6 Amp rating Make:-Legrand/Indoasian/Havells

SP 16 Amp rating Make:-Legrand/Indoasian/Havells

S&F in replacement modular socket out let shuttered type , 230/250 volts grade (as catered in point wiring above) of following ratings including taking down of switches of any capacity for taking credit complete :-

5 Pin 6 Amp multipurpose type.Make:-Legrand/Indoasian/Havells

6 Pin 16 Amp multipurpose type.Make:-Legrand/Indoasian/Havells

S&F in replacement plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts including taking down of old unsv metal clad DB complete all as specified.

Taking down of light fittings of any type and any wattage complete all as specified.

S&F in replacement LED Bulkhead fitting of 10Watt 230Volt , complete with LED e Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-CG cat part no.-LBHE-10-CDL, equivalent in Havells/Philips.

S&F in replacement LED Tube light fitting 10 watt ( 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable all as specified make CG Cat Part No LCTL-9-CDL, Havells Cat part No LHEXBLP7UN1W009, Bajaj Cat Part No BCLSB10WH

S&F in replacement LED Tube Light(cool day) of 20 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-CG/PHILIPS/HAVELLS cat part no.-LCTLN-20-CDL or equivalent in make.

S&F in replacement LED Mirror light of 3.6 Watt 230Volt ,chrome colour complete with E14 lamp base & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-Philips cat part no.-34034/14/86 or equivalent in CG/HAVELLS .

S&F in replacement aesthetically designed Wall mounted decorative wall LED light of 8 W fixture with opal diffuser to give glare free light including suitable LED lamp of 8 W having Lamp base E27. Make:Philips cat No-37934/06 or Equalivalent of CG/Havells

Disconnecting mains connection and taking out old sub main wiring two single core 4/6 sq mm and one single core 4/6 sq mm aluminum conductor cable from the concealed conduit from the wall or ceiling and making good to surface.

M&L in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 10 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 10 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length).

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar.

S&F in replacment of factory made, sheet steel distribution boards,SPN 12 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar.

S&F in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs including taking down of old unsv MCBs (DBs Catered separately in this schedule) :- Note : Make of the MCB should be the same as that of DB

MCB SP 6 to 32 Amps

MCB SPN 40-63 Amps

M & L for taking down of geyser of any capacity and servicing complete including replacement of thermostat,heating element,outer cover,top cover,base plate,copper tank,gun metal valve,safety nut and indicator light(if required) and refixing the same complete all as specified and directed by Engr-in-charge.

M&L for taking down of ceiling fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

S&F Modular type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required

M&L for taking down of exhaust fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

RISHU CONSTRUCTION COMPANY

Ex Serviceman Enterprises

BEHAL TRADERS

akhil enterprises

sony engineering works