Construction of a toilet for persons with disabilities at the Inspection House, Bulandshahr

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, royalty etc but excluding GST.As per DSR no 2.8.1.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, royalty etc but Excluding GST as per DSR no 4.1.8.

R.C.C.work with cement approved coarse sand & 2 cm.(3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Column & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.2.2.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation & plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 6.1.2.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 6.4.1.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Slab & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.3

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood,including applying including supply of all materials,Labour,T&P etc & alsoincluding supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 9.1.1

Providing and fixing ISI marked 35 mm flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with one side decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick.including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no (9.21.1+9.127.1)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 9.23.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 5.22.6.