SPECIAL REPAIRS TO BLDG NO. P-116, P-549, P-931 OF CERTAIN AREA AT MIL STN JAISALMER OF GE (A) JAISALMER

Amount

Demoiliton of stone slabs and tiles of any description or thickness in foors, aprons etc

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, complete all as specified and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in flooring.

Material and labour for PCC (1:3:6) type C2 (using 40mm graded agg) 75mm thick as in plinth protection/hardstanding finished even and fair using extra cement as specified

M&L for granite of any type slab 18mm thick machine cut bedded and jointed with grey cememt slurry and pointed with white cement with admixture of gigment to match the shde of granite stone including nosing, grinding and plishing complte all as specified and directed incl 15mm thick screeeding bedding in 1:6

M&L for chequred cement concrete tiles fixed with grey cement & pigment of size 20cm X 20cm X 25mm thick set jointed and pointed in neat cement slurry including screed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) all as specified and directed by Engr-in-charge.

M&L for Coloured Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with gray cement slurry or coloured and horizontal/ verticle support for WHB and pointed with gray cement wth admixture of pigment to match the shade of tiles complete all as specified as directed by Engineer Incharge

M&L for non skid ceramic endura coloured tiles 10mm area of each tile exc 0.09sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed

S&F Non - skid Ceramic tiles 7 to 8 mm thick joint free tile area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick CM (1:6) complete all as specfied and directed by Engr-in-charge

M&L Glazed ceramic coloured tiles in vertical surface 350mm x250mm/ 450mmX350mmX7mm , 7-8mm mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering CM1:4 complete all as specified and directed.

M&L glazed ceramic tiles in of size 600 x 600x 7mm thick as in flooring including scred bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L glazed ceramic tiles in of size 600 x 600x 7mm thick as in skirting including bakingcoat 10mm thick in CM 1:4 all as specified.

M&L for Machine cut kota stone slab flooring 16-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including over a screed of 15mm thick CM (1:6) complete all as directed by Engr-in-charge.

M&L Kota stone slab 16-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and backing coat 10mm thick in CM 1:4 for laying/fixing of tiles on vertical surfaces complete all as specifiedcomplete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each.

Taking down shutter of any description n exc 1 sqm each.

S&F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , suppling & fixing as per specification and drawing

S&F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Ztop & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F aluminium tower bolt 200 mm long of anodised section.

M&L 150mm long aluminium anodised barrel tower bolts of extruded section and fixed.

M&L 150mm size extruded aluminium alloy handles, fabricated type, anodised.

M&L 100mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm

S&F aluminium alloy anodized sliding door bolt 300mm long with hasp and staple fixing clips etc complete.

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

S & F in repairs steel window handle left / right fixed complete all as specified and directed.

S&F in repair steel window handles 100mm length including bolts washers etc all as specified

S&Fof 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&Fin repair 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F in repair steel window stopper peg stay complete all as specified and directed.

S&F hold fast confirming to Fe 290 Gde 165.

S&F in repair 3mm thick looking mirror for built in Almirah

M&L for Second class hard-wood in scantlings timber framed and fixed clean sawn as in frame including dismentaling timber scantling 40 Sq cm and over in section and in any position unframed and framed work complete all as specified and directed by Engineer Incharge

S & F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290-Gde-E-165

M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 including Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4.

Taking down cement plaster on brick/concrete/stone masnory surfaces of any description all as directed by engr-in-charge.

Rendering 15mm thick in 1:6 on fair faces of brick work or concrete surfaces finishing even and smooth .

Rendering 15mm thick in 1:6 on stone wall surfaces finishing even and smooth without using extra cement .

Material and labour for cement plaster in CM 1:4, 20mm thick in two coats (15+5) with using integral water proofing compound and finished even and smooth without using extra cement including necessary scafolding of bldgs completed all as specified and as directed and removing the debris from the site, complete all as specified and directed by Eng-in-charge.

Material and labour for 5 mm thick rendering plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement in any height of building complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L three coat of white wash on new surface of ceilling including preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as directed by Engineer-in-charge.

M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying two coat of white washing complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old decorated plastered/unplasterd surfaces of ceiling and applying two coat of white washing complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old decorated plastered surfaces of walls and applying two coat of cement base paint complete all as directed by Engineer-in-charge.

M&L perpartion of old existing wall/ceiling surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint over and including a coat of wall primer(Alkali resistant) including filling up of holes by wall care putty wherever required all as directed by Eng-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and directed by Eng-in-charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Eng-in-charge.

M&L for washing/rubbing down and stopping of destempered, plastered and painted surfaces of wall/ceiling including cornices etc and making good of holes by filling holes in plastered surfaaces with POP mixed with destemper and applying one coat of destemper oil emulsion complete all as specified and as directed by Eng-in-Charge.

M&L for Complete removal of existing treatment and applying over a coat of chalk whiting on plastered surface, preparatory to distempering, priming plastered and other surfaces with alkali resistant priming paint and applying two coats of OBD on wall

M&L for Complete preparation old decorated brushing scraping down smoke soot, moss, efflorence surfaces of walls and preparation of surfaces (external faces) of walls and applying one coats of external weather proof paint of Apex or equivalent complete all as per manufacturers instructions, complete all as per specified and directed.

M&L for Complete preparation old / new surfaces of walls and preparation of surfaces (external faces) of walls and applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self coat) complete all as per manufacturers instructions, complete all as per specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed by Engineering in charge.

M&L for preparation of new painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineering in charge.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as directed by Engineering in charge.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of wood primer complete all as directed by Engineering in charge.

Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and S&F plain figured glass of 4 mm thick pin headed type not exceeding 0.50 Sqm in each pane complete all as directed by Engr-in-charge.

S&F sheet glass shelf assambley consisting of 5.5mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60cm long.

Welding in repairs exc 2.5cm but not exceeding 5cm in length (thickness of metal to be welded not exc 6mm ) including cleaning preparing the surface and holding the member in true position complete all as specified and directed by Engineer in charge.

S&Fof mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&Fin repair mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F for 30mm Continuous (Piano) hinges mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F 40mm dia Cupboard knobs fixed with nut srew and washer of mild steel bright finished complete all as spcified and directed

S&F 105mm X 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

S&F 125mm X 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

S&F butt hinges 100mm long stainless steel.

S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

S&F 2nd class hard wood Glazed and skelton shutter 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Taking down door shutter exc 1 sqm but not exceeding 2.0 sqm and re-fixing in the same opening including easing and adusting and fixing with hinges all necessary work complete all as specified and directed by Engineer - in- Charge.

Resecuring or easing & adjusting, taking down Shutters of any description exc 1 Sqm but n exc 3 Sqm each without taking down the shutter

S&F Steel windows or ventilators, fixed type, with glazing bars

S&F steel ventilators with top hung shutters fitted with box type hinges including MS peg stays, MS handle and glazing bars dovetailed or welded for receiving glass including painting with one shop coat of zinc chromate primer,and cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) and applying two coats existing wall finishes to match with existing colour complete all as specified and directed by Engineering –in-Charge. Note : The rates quoted are inclusive of making good all the disturbed surfaces to match with the adjoining surfaces and necessary scaffolding etc up to 4th floor.

S&F steel window with side hung shutters fitted with box type hinges including MS handles, peg stays, MS guard bar made out of 10 mm squre bar, glazing bars dovetailed or welded for receiving glass and including painting with one shop coat of zinc chromate primer including cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) and applying two coats existing wall finishes to match with existing colour complete all as specified and directed by Engineering –in-Charge. Note : The rates quoted are inclusive of making good all the disturbed surfaces to match with the adjoining surfaces and necessary scaffolding etc up to 4th floor.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete, dovetailed or welded but without glazing bars

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 160 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltrs/Sqm by torched application, complete all as specified and directed. Roof treatment including following of as under:- (i) Taking down the existing roof treatment of any description , any thickness and removing the debris not exceeding 1000 m complete all as specified and directed by Engineer-in-Charge. (ii) Brushing neat cement slurry @ 3.0 Kg of cement per Sqm area over old concrete surface (iii) M&L screed bed 15mm cement plaster in CM 1:4 on concrete surfaces duly mixed with water proofing compound and finished even and smooth by using steel trovel (WPC will be measured saprately) complete all as directed. (iv) Applying 1 coat or bituminous primer conforming to IS-3384 @0.3 lts/Sqm (v) Applying 2 coat of Al paint @ 100 ml/sqm (vi) PCC (1:3:6) 50mm thick on memberance

Supply only integral water proofing compound.

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S&F in Fe 410W (Gde E-250) Quality B framed work, trussed,purlins,rafters,rails, colmns and fastenings and heavy bracket framing (pipes ,beam,tee,angle,channel ,hallow sections) including distance pieces,cleats,hook ,clips etc complete all as specified and directed by Engr-in-charge

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring / hardstanding.

M&L for 25 thick sand cushing for laying of precast concrete interlocking tiles including watering and consolidation complete.

M & L for 80mm thick rubber moulded inter locking cement concrete mixed colour factory made paver blocks M-40 designation (compressive strength) laid over 25 mm thick sand cushion to maintain the slope including compaction with 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base etc.

S&F in repair Single action spring hinge mild steel with steel wire springs stove enamelled black 100mm long including taking down of shutter and refixing in same opening, easing complete all as directed by Engr-in-Charge.

Taking down all loose plaster and concrete if any in RCC columns, Chajjas, beams,slabs or any other type of RCC members,removing all loose ruts/scale from reinforcement etc by using wire brushes ,sand paper or any other chemicals, applying a coat appoxy coating on old reinforcement, tying IRC fabric of size 75x75mm of 3mm dia and binding with mild steel wire annealed with exsting reinforcement and applying cment slurry uniformaly to exposed surfaces and gunniting using CM 1:3 avg thickness of gunniting not less then 30mm and finishing the surfaces with 10mm thick rendering in CM 1:4 finished even and smooth with out using extra cement and removing the debris from the site, complete all as specified and directed by Eng-in-charge.

S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI tubing with all fitting fixed to wall and ceiling,concelled in walls/ floor etc all as specified and as directed by Engr-in-charge.

S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI tubing with all fitting fixed to wall and ceiling,concelled in walls/ floor etc all as specified and as directed by Engr-in-charge.

S&F 25mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI tubing with all fitting fixed to wall and ceiling,concelled in walls/ floor etc all as specified and as directed by Engr-in-charge.

S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs. (Make:-Cera Cat No S3010102 , Hindware Cat part No - 20042)

S & F Vitreous china Ware wash down water closet pan (Pedestal), white (excluding fixing bolts, flushing cistern and flushing pipe).(Make:-Cera Cat No S1050104 , Hindware Cat part No - 20011)

S&F in repairs 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed by Engr-in-Charge.

S & F 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S&F Oval type wash hand basin vitereous china flat back white incl CP waste coupling waste pipe brackets complete fixed in repairs.(Make:-Cera Cat No S20330103 , Hindware Cat part No - 10017)

S&F in repair fancy type pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without with long screwed shanks and fly nuts, screwed fixed in repairs.

S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repairs.(Make:-Prayag Cat part No PIS 26 and eqvelient)

S&F in repair Stop valves, 15mm cast copper alloy, but fancy type, chromium platedscrewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified.

S&F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.(Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird)

S&f for Gun-metal, 15 mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&f for Gun-metal, 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&f for Gun-metal, 25 mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm as in repairs

S&F CP grating for Nahani trap or floor trap of size 100 mm dia fixed in repairs

S&F in repair 75mm bore CI bends (any radius) diminishing pieces or tapers.

S&F in repair 100mm bore CI bends (any radius) diminishing pieces or tapers.

S&F in repair 75mm bore CI branch pieces (equal or unequal ) ordinary or inverted(spigot or socket type) or with parallel branches. diminishing pieces or tapers.

S&F in repair 100mm bore CI branch pieces (equal or unequal ) ordinary or inverted(spigot or socket type) or with parallel branches. diminishing pieces or tapers.

Supply and fix PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced Concrete) set in cement morter joints including fittings any in position complete all as specified and directed by Enigneer Incharge

Dismantling boarding of any description fixed in any position fixed with screws

S & F 18/19mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination alround 6mm th teak fillets fixed in cup board shutter, Shelf,kitchen CB or pelmet complete all as specified.

S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample and all as specified and directed by Engineer-in-charge.

M & L aluminium anodised decorative suitable brackets for curtain rails 20 to 25 mm dia complete all as specified & directed.

M&L for PVC (SWR ) floor trap 125/110mm and jointing with solvent cement and fixed in position complete all as specified and directed incl concrete type B1(1:2:4) complete in repairs (with wpc note: wpc will be measured and paid seperately)

M&L 75mm dia cost iron floor trap,with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) including CP Grating.

S&F in repair CP shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of fixed in repairs. (Make:-Prayag,Cera,Silver Shine, Hindware )

S&F in repair Swivel Shower rose round 85mm size with arm bend of 45 degree with flange of PTMT any colour complete all as specified and directed by Engineer Incharge

S&F in repair 700 x 500 mm 5 mm thick glass mirror with double coat for protaction and longevity grounded edges for safety and siliver plating on the back for better reflection all as specified.(Make:-Prayag Cat part No BLM-01,Cera Cat part No B3510112)

S & F 500 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank

S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank

Dismantling of cast iron or reinforced concrete drain pipes of dia 110mm , jointed in cement mortar and taking out of trenches, if required

Dismantling of CI/PVC soil , rain water pipe, cast and vent pipes of any dia, any pattern including all fitting, bore pipe 100mm

Dismantling of CI/PVC soil , rain water pipe, cast and vent pipes of any dia, any pattern including all fitting, bore pipe 75mm

S&F 75mm dia CI soil, waste and vent pipes any length with or without ears with concrete joints, fixed to wall

S&F 75mm dia CI soil, waste and vent pipes any length with or without ears with concrete joints, fixed to trenches

S&F 100 mm dia CI soil, waste and vent pipes any length with or without ears with concrete joints, fixed to wall

S&F 100 mm dia CI soil, waste and vent pipes any length with or without ears with concrete joints, fixed to trenches

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut screwed for iron pipe complete.

Supply only Plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hing device

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F for water jet as approved by GE and fixed to EWC complete all as specified and directed.

S&F High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 of 38/40mm bore fixed complete to walls,ceilings or in floors etc.

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as specified and directed.

Taking down carefully old copper/Aluminium point wiring , fitting and fixtures complete such as switches,ceiling rose, pendenent, regulators, sockets etc , removing unserviceable materials from site and making good disturbed surface etc complete as per arrounding and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC conseled conduit and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FR LS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan point controlled by one switch 5 Amp one way

(b) socket outlet 3 pin 5 amps same board

(c) socket outlet 3 pin 5 amps Independent board

(d) One ceiling fan/ exhaust fan point controlled by one, one way switch and regulator.

(e) One bell point controlled by one switch

(f) One light point controlled by one, two way switch

-Ditto- all as per item No 147 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including heavy duty ISI marked PVC Cassing capping alongwith its accessories of suitable size, with GI sunken boxes of 1.2 mm thick, 60 mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of cover with white colour hylum sheet of 3.0 mm thickness switches/ sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :

(a) One light point controlled by one, one way switch

(b) One ceiling fan/ exhaust fan point controlled by one, one way switch and regulator.

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

(d) One three pin 5 Amps socket outlet point controlled by one No one way switch on independant board

(e) One light point controlled by one, two way switch

All as per Item No. 155 above but with stranded copper conductor 4.0 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 4.0 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S&F for Switch piano flush type single pole one way, and 6 amp complete ISI mark complete all as specified.

S & F switch piano single pole flush type,two way, 5 amps, 230 volts.

S&F for Socket outlet multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete all as specified

S & F in repair of modular type 1 way 6 Amp complete all as specified.

S & F in repair of socket ,6 A - 2/3 pin combined 2 modue complete all as specified.

S & F in repair of modular switch 1 Way 16 A,1 module complete all as specified.

S & F for Switch piano flush type single pole one way, and 15 amp complete ISI marked complete all as specified.

S & F in repair of socket 6A/16A - 2/3 pin combined 2 module complete all as specified.

S&F for socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type complete all as specified.

S & F ceiling rose 65 x50 mm three terminal 230 volt

S & F for Bell, Ding Dong AC, 230 Volts complete all as specified.

S & F for Bell push 6 Amp, complete all as specified.

S & F in repair for stepped type fan regulator, Socket type, operating on 230 Volt 50 Hz complete all as specified.

S & F in repair for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified.

S & F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

Supply and fixing MCB's SPN 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in existing conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete with two coat of black bituminus painting of old steel conduit with enamel paint of superior quality after scratching of old paint with sand paper complete all as specified and directed by Engr-In-Charge.(Note :- Two runs of 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified

S & F Energy saving new generation 10/12 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make Orient, Philips, Crompton, Havells etc

S & F for Highly efficient LED Bulbs, 12 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL , SYSKA complete all as specified and directed

S & F for LED down light recess mounted luminare, square type 15 watts worm white in colour with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz Complete all as specified Make: Philips Havells, Wipro

Fixing Only Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting type Complete all as specifed Note : Item will be issued in SCh B Store

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting/ street light luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

Taking down ceiling fan / Exhaust fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and as directed.

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Fixing only ceiling / exhaust fan after serviceing greasing change of bearing if reqd, including making serviceable and noise free in all respect and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

M & L for Painting of Old geyser of any capacity with white colour synthetic enamel paint by spraying and filling cavaties with pillar, one coat after cleaning all dust, with proper filling complete all as specified.

Refixing the geyser at it's original location after repair/ replacing the unsv items like Heating element, Thermostat, PVC Connection pipe of hot & Cold type, Changing of outer body with its inner tank if found unservicable, Making Geyser servicable in all respect complete all as directed spcified by Engineer-in-charge. (Note: Rate Quoted by Contractor shall be inclusive for replacing all unsv item like Heating element, Thermostat, PVC Connection pipe of hot & Cold type, Changing of outer body with its inner tank etc.)

S & F in repair sheet metal enclosure Geyser / AC Box having 20 Amp MCB SP as incomer complete all as specified

S & F in repair bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers,painting complete as specified.

M & L for removing and taking out energy meters wires/submain and MCB SPN and refixing after scratching old existing painted corroded surface of nay description such as meter panel at entry of Block and spray painting inside and outside and fixing SPN with thimbles (stricitly existting shade) complete after scratching existing rusted surface and apply one coat of primer (Superior quality ) before spray painting in panel ( Make of paint:Asian Berger or Equivalent) Note: painting of panel from inside and outside to be done after scratching using glass paper and area of glass to be covered by paper before spray painting to avoid stains of paints)

M & L for Painting of DB Box Panel after scratching of old rusted surface and old existing painted corroded surface of any description two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally after scratching existing rusted surface and apply one coat of primer complete all as specified.

M & L for XLPE insulated,armoured heavy duty electric cable wiyh aluminium conductor,1100 Volts,grade,cross sectional area 16 Sqmm x 2 core Saddling required on building complete all as specified and directed..

S & F for GI tubing 40 mm dia light grade galvanised laid in wall ceiling & Floor including all fittings all as specified and directed.

M & L in repair bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

GEMRARAMCONTRACTOR

Leelashah Enterprises