32/HDA/EC-ELECT/2025 2026

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km.

Loading, unloading and transportation of pole at site to stock yard and stock yard to site.

Supply of 4nos. J- bolt (G.I), M-20 600 mm long, 12nos. of Nuts with 16nos. of washers EN8 Grade excluding construction of RCC foundation.

Installation of 7 Mtr. long G.I octagonal pole.

Preparation of RCC foundation of 400 mm dia and 1500 mm height (1200 mm below the Ground Level and 300 mm above the Ground Level) with required rod, cement, chips and sand etc. at the ratio 1:1:5:3 with ground bolt 4 nos for fixing the 8 Mtr Height G.I Octagonal pole (excluding supply and delivery of 8 Mtr Pole and Nut Bolts).

Supply and delivery of 1.1 KV grade 4 C X 16 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any. The cable should have ISI mark. .[Havells/Polycab/Gloster/ KEI]

Supply, drawing and Connection of luminaries with 3C X 1.5 Sqmm pvc insulated FR copper conductor through the Poles from looping box to light fittings as required.[ Havells/Polycab/Gloster/ KEI]

Fixing only Street / Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and connection with Terminal connector at the suitable location of the pole.(Legrand)

Supply and Installation of HDA printed logo suitable 15"×9" on GI Octagonal/tubular Pole, on brick foundation of meter box, feeder pillar box. (1 no logo/pole)

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire with the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Micro tunneling including supply of HDPE pipe (ISI Marked) 40 mm dia as per appropriate specification in single length for each individual tunnel (Average 2 Mtr depth from the ground level).

Supply of HDPE Plb Duct pipe of size 32/26 mm.

Laying of Cable by Jack push method through micro tunneling 2-3M deep under black top surface with excavation of double earth pit 1400×600×3000 mm on hard soil, laying of pipe, refilling and ramming of soil in earth pit, restoration of road surface etc (Excluding the supply of Pipe)

Supply GI earth Spike (1830 X 20 mm) (Each Pole).

Earthing complete with driving of Erath spike & connection of Earth electrode with noncurrent carring metallic parts of supports (Each Pole).

Laying of one No. cable upto 35 Sq mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of one No. HDPE Pipe in underground trench 460 mm wide x 760 mm average depth including filling the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI /HDPE Pipe/open masonry trench for single, 2, 3, 3½ & 4 core

Supply & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. 40 mm dia.

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 Core X 16 Sqmm

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (0.88 sq.mm per pole x 35).

Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. (0.88 Sqmm per pole x 35).

Please Enable Macros to View BoQ information