Supplying, laying and rearrangement of LT UG cable of House feeder switches to new LT distribution panel at Vikram power house in NITK

Amount

Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm

Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm

Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 150 Sqmm, 3.5 Core, (25 GI Strips - 4 x 0.8 mm)

Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. - 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm)

Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. - In hard Soil

Cutting of Tar Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.

Supplying and laying of 100mm GI pipe b: class as per IS 1239 with necessary clamping arrangements for UG cable of 11 kV

Supplying and laying of PVC pipe - OD 75mm and 6 Kg/Sqcm.

Labour charge for Laying of cable 1.1kV class LT UG cable in existing trench GI pipe / stone ware pipe / on pole / on wall using wooden/ aluminium rollers as directed by the departmental staff. - 120 to 240 Sqmm

Labour charge for Laying of cable 1.1kV class LT UG cable in existing trench GI pipe / stone ware pipe / on pole / on wall using wooden/ aluminium rollers as directed by the departmental staff - 2.5 to 25 Sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 240 sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 180 sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 150 sqmm

Labour charge for Laying of cable 1.1kV class LT UG cable in existing trench GI pipe / stone ware pipe / on pole / on wall using wooden/ aluminium rollers as directed by the departmental staff. - 120 to 240 Sqmm

Labour charge for Laying of cable 1.1kV class LT UG cable in existing trench GI pipe / stone ware pipe / on pole / on wall using wooden/ aluminium rollers as directed by the departmental staff - 2.5 to 25 Sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 240 sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 180 sqmm

Supplying tinned aluminium lugs and crimping and wiring to terminal point for wire of the following sizes – 150 sqmm

Supplying and making 3.5 C x (122 to 225sqmm) Heat Shrinkable type stripe through joint kits suitable for 1.1 kv class / LTUG cable as per IS 13573 – 3.5C X 240 sqmm

Supplying and making 3.5 C x (122 to 225sqmm) Heat Shrinkable type stripe through joint kits suitable for 1.1 kv class / LTUG cable as per IS 13573 – 3.5C X 120 to 225 sqmm

Supply and fixing of Heavy-duty LT Brass cable glands suitable for UG cable of 1.1kV class -75 mm

Supply and fixing of Heavy-duty LT Brass cable glands suitable for UG cable of 1.1kV class -45 mm

Supplying of 11 kv 200 amps single break GI coated GOS complete set with blades, insulators, pipe rod, bolt nuts etc complete

Fixing of GOS including wiring (11 kV Single Break 200 Amps)

Supplying of 11 kV, HG Fuse Unit with Solid Core Insulator

Fixing DOLO Cut-out/Horn Gap Fuse including fixing of cross arm and wiring

Supplying of rabbit ACSR conductor as per IS 398 (PART 2 / 19996) (6/3.35MM al + 1/3.35mm st ) std wt. 214kg/km.

Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.

Supplying and fixing of multi-function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phases, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying 400 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete - 400 A 4 x 50 x 10 mm Aluminium Strips

Supplying Heavy gauge PVC conduct pipe 19/20 mm dia and 2 mm thick confirming to IS 2509 with suitable size bends, junction box, adhesive paste and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or all plugs in case of bricks walls and cement plastering damaged portion using heavy gauge saddles at an interval of 300 mm. - 19/20 mm dia and 2 mm thick.

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. A) Medium point above 3m upto 6m from tapping point to out let via switch – 4 point

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Long point above 6m upto 10m from tapping point to out let via switch – 10 point

Supplying and fixing of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply-15" Sweep (450 mm)

Supplying and fixing of 4 feet -PVC Batten with integrated LED tube 20/22W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect, working under standard electrical condition-LED light fitting 1 x 4' - 20/22 W

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.260 mm x 210 mm x 116 mm

Supplying and Fixing 40 mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.

Fixing departmentally supplied halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

Supplying & fixing 6 Amps SP MCB miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

Supplying and fixing of LT Route, Joint indicating concreate slabs at an intervals of 6 Mtrs (LT CABLES)

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. -a) 12" x 12" x 3" (300 x 300 x 76 mm)

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. A) 6 Amp Switch

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. A) 6A Three Way 5 Pin Socket

Engaging labours per day for removing the existing cables from the cable duct and dismantling it from panels and retermination work, and dismantling old deteriorated panels and cables, existing GOS, HG fuse units and shifting it to the dept store, including labours, tools, transportation etc complete. A) Engaging Electricians (Skilled) 3 Numbers and Unskilled labours - 4 numbers for 4 days

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, cost of material,labor,naming of each panel,switchigs,acbs, labour charge complete as per specifications and as per directions of Engineer-in-charge

M/s Anugraha power services

Shantha Electricals and Engineers Pvt Ltd

DSOUZA ELECTRICALS

Raaj power solutions and facilities