Repair Renovation works of Central Farmers Hostel South East portion at Main campus of Uttar Banga Krishi Viswavidyalaya Pundibari Cooch Behar

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directedcessary (Ground floor). (i) With 1:6 cement mortar (c) 15 mm thick plaster. ground floor

first floor

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)ground floor

first floor

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer including cleaning and smoothning of surface.Two Coats.i)Ground Floor

first floor

Painting with best quality synthetic enamel paint of approved make and brand including smoothening su : (a) On timber or plastered surface (iv) Two coats (with any shade except white)

(b) On steel or other metal surface :(iv) Two coats (with any shade except white) G.F

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (b) Above area 2.5 Sq.m

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local.

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(b) 32 mm thick shutters (single leaf)

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(v) 100 x 63 x 3.2mm.

(i) Door stopper.(Brass)

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iv) 300mm x 19mm dia. bolt.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(v) 150mm long x 12mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (vii) 150 mm grip x 12 mm dia rod.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]. (ii) 6mm

Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square).(d) Other Local Wood.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(ii) 4 mm thick

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor(a) Area of each tile above 0.09 Sq.m (i) Coloured decorative

(B) Wall(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative

Galvanised plain sheet works (excluding supporting framework) fitted and fixed with 6 mm. dia J or L hook-bolts and nuts, sheet-bolts, limpet and bitumen washers and putty with 150 mm. end lap & 50 mm minimum side lap complete.(b) In wall: with 0.63 mm. sheets.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing aterials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No eparate ayment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia). 100 mm

(i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm

Supplying, fitting and fixing shower of approved brand and make.(h) Polythene overhead shower of approved make 15 mm X 125 mm

Supplying, fitting and fixing pillar cock of approved make.d) Polythene Piller Cock (EMCO / ATLAS or equivalent) (i) 15 mm

Supplying, fitting and fixing soap holder.(a) PTMT (Prayag or equivalent)

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long

Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(v) 900 mm long

Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.) White

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm.

Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass. (i) 25 mm dia. and 450 mm long

Supplying, fitting and fixing bib cock or stop cock.(d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all iii) 630 mm X 450 mm size

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. 20 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. 40 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. 50 mm

Polythene Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Supreme or similar).

Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(d) Upto 100 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit

Cleaning soak pit by removing the top slab and replacing inner filling with jhama bats and repairing the pit as necessary including fitting the slab.

Cleaning silt of master trap pit.

Cleaning silt of inspection pit.

Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) in suitable size PVC casing-capping (Pesto/ Precision) incl. necy. fittings etc. to light/fan point with Modular type switch (Legrand) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. Av. Run- 8 mtr.

S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in 25 mm PVC casing-capping ( Make- Pest plus / precision) including necessary PVC clips and fittings. and making necy. connection as required.a) 2x 1.5 +1x1.5 Sq mm .

Fixing of single or twin Crystal Glass LED tube light on existing fram with necessary connection if required flexiable wire to be fitted as per requirment .

Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in 25 mm PVC casing-capping ( Make- Pest plus / precision) including necessary PVC clips and fittings. and making necy. connection as required.a) 2x 2.5 +1x1.5 Sq mm .

Supply & fixing of 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc.

Fixing of 18 watt LED surface mounted light fittings on wall/ceiling by screws etc. .

Supply and fixing of 6A piono type switch on existing switch board . Make- Legrand /Anchor

Supply and fixing of 5/6A piono type socket on existing switch board . Make- Legrand /Anchor

Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.

Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON)

Supply and fixing of 240 volt 9 watt LED lamp, Make - Bajaj.

Supply of 240 volt 20 watt Crystal Glass LED tube light , Make - Havell's , Model - PHOTONULTRAE2.01213T8SSTL20WLED865SPC, page- 57, dt- 01.11.2023 or equivalent

Supply of 20 watt surface Led light fittings, Make Philips, dt- 01.01.2024, page- 44, Model - SM 251/261 LED 20S 6500 PSU WH