EDCH-12/2024-25

Amount

Supply of Following Matarial as per relevent ISS

Cross Arm Clamp with Nut & Bolt

F bracket

Stone Pad

D/P Clamp with Nut & Bolt

PRC Connector

Suspension Clamp with Nut & Bolt

11 kv Cable Jointing Kit

Dead End Clamp with Nut & Bolt

H.T Tee Channel Clamp with Nut & Bolt

MS Channal

Holding Clamp with Nut & Bolt

HDPE Pipe

Earthing set Complete

Distribution Box With Clamp

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5 Mtr. Long

ST Pole 11 Mtr. Long

11 KV Cross Arm

11 KV Pin Insulator with Pin

Top Channal

11 KV Disc Insulator with Fitting

Dropper Channel

MS Angle

11 KV Fuse Set

11 KV TPMO

100 KVA 11/0.4 KV T/F

63 KVA 11/0.4 KV T/F

16 KVA 11/0.4 KV T/F

ACSR weasel Conductor

3x70 Sqmm 11 kv XLPE Cable

3x185 Sqmm 11 kv XLPE Cable

3x300 Sqmm 11 kv XLPE Cable

AB Cable 3x120 sqmm

LT PVC Cable 3.5x150 Sqmm

Stay set Complete

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

ST Pole 11 Mtr. Long

Pcc Pole 8.5 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

11 KV Cross Arm Clamp with Nut & Bolt

F bracket

Stone Pad

D/P Clamp with Nut & Bolt

PRC Connector

Suspension Clamp with Nut & Bolt

Dead End Clamp with Nut & Bolt

H.T Tee Channel Clamp with Nut & Bolt

MS Channal

Holding Clamp with Nut & Bolt

HDPE Pipe

MS Angle

Distribution Box With Clamp

11 KV Cross Arm

11 KV Pin Insulator with Pin

Top Channal

11 KV Disc Insulator with Fitting

Dropper Channel

11 KV Fuse Set

11 KV TPMO

11 kv Cable Jointing Kit

Installation of following T/F on Old/New constructed double pole in proper alignment direction & making HT/LT connection.

100 KVA 11/0.4 KV T/F

63 KVA 11/0.4 KV T/F

Installation of 16 KVA T/F on newly/Old constructed Pole in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR weasel Conductor

AB Cable 3x120 sqmm

LT PVC Cable 3.5x150 Sqmm

Safe Dismenteling of old and used following T/F from Double Pole with opening of all HT/LT Jumpers, all works which required for dismentling of T/F and carriage it up to Store Hathras/ J.E Store all cost of labour and T&P which required for completion of work

63 KVA 11/0.4 KV T/F

25 KVA 11/0.4 KV T/F

10 KVA 11/0.4 KV T/F

Construction of plinth of size 2*2*1.5 mtr above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Pipe earthing of 250 KVA medium Power Transformers

Net Fencing of Medium Power Transformer

Resagging of Existing line by stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR Weasal/Dog conductor

Cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer

Railway Underground Laying of 11 KV XLPE Cable as per RESPO manual and as per direction of supervising engineer.

Underground Laying of 11 KV XLPE Cable as per RESPO manual and as per direction of supervising engineer.

Drilling In Railway Line

Back Cartage of Following Matarial

ACSR Conductor Scrap

G.I Wire scrap

Cable Scrap

Iron Scrap

P K ENTERPRISES

Bobby Electricals