WELCOME MAINTAINENCE TO JCO AND OR ACCN UNDER GE MCEME SECUNDERABAD

Amount

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed

M&L for rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc and as directed

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for pillars and etc all as specified and directed by Engineer in charge.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper, complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old decorated surfaces of ceiling, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD) , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of white wash , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of cement base paint , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 04 sqm

Taking down, Shutters of any description exc 1sqm but n.exc 2 sqm each, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.

M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints.

S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc

S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge

S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, for windows and ventilators and door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 a and fixed to chowkhats complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel 100mm long and as directed

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and as directed

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and as directed

S&F aluminium handles 150mm long fabricated type anodised all as directed

S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate fixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed and as directed

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

M & L for 18/19 mm thick, Prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

M & L 2nd class hardwood exc 3 & n exc 6 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails orbrads , complete all as specified and directed by Engineer-in-Charge.

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified

S&F 100mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed and as directed

S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed.

S& F Mortice lock, vertical type, size 65 mm 4 lever complete all as specified and directed by Engineer-in charge.

S & F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed,etc complete all as spd and directed.

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for brickwork with fly ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc.

M&L for rendering 15 mm thick in concrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m)

Supplying only Integral waterproofing compound

M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed

M&L for preparation of two coat of cement base paint over a coat of alkali resistant primer on newely plastered surfaces of walls complete all as directed

S&F in repairs fancy type chromium plated 15 mm bore 2 in 1 bib cock , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and as directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge

S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete

S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair 15mm bore CP Pillar tap cast copper alloy, screwed down, high pressure, with quarter round handle, with or without lettered hot or cold with long screwed shanks and fly nuts screwed complete all as specified and as directed by Engineer-in-Charge

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m) and as directed

S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows all as specified and directed by Engineer-in-Charge.

Dismantling of 1000 ltr water storage tanks and removed to store complete all as specified.

S & F 1000 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

S&F CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality and pattern fixed with screws, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repair prepainted steel windows/ventilators ( ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge. (Make : NCL/TATA/Equivalent)

Vara Enterprises (BID ID -3394127)

M/S DIVIJA BUILDERS (BID ID -3394343)

NEWS CONSTRUCTIONS (BID ID -3386496)