REPAIR RESTORATION TO VARIOUS TYPES OF MAP TP AND HDF FURNITURE ITEMS AND REPAIR AND MAINT OF BED HARD CHARPOY MS TUBULAR CHARPOY IP FOLDING CHARPOY GI PIPE 32MM WITH CONNECTED WORKS AT ALWAR MIL STN

Amount

M & L for removing carefully following existing broken/unserviceable components/members of Alpaina Sofa Set 3 Seater (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Cloth - The Cloth will be 100% genuine polyester velvet having first class fabrics and colour of the cloth will be approved before job initiates.

(b) Cushions - The cushions will be 100mm thick having 28 & 50 density alongwith feather properly woven in velvet cloth. Make - Sleepwell or equivalent

(c) Material & labour for preparation of all cloth surface by removing of exising cloth and cushion and replacing with the new items all as specified and as directed

M & L for removing carefully following existing broken/unserviceable components/members of Board Notice for 30 Card (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Plywood- Plywood for the back & front of the board shall be 9mm thick and duly polished and sunmica to be pasted on front Side as per existing shade. Make- Greenply/Centuryply/Kajariaply/Duro/Nationalply

(b) Frame for Cards made up of MS 1.00mm MS Sheet for Cards placing will be as per the existing shape and size

(c) Material & labour for preparation of all wooden surfaces of Board Notice by removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed.

M & L for removing carefully following existing broken/unserviceable components/members of Chair CB Steel With Arms (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Taking out old unserviceable seat & back and supply and fixing new wooden seat 1st class hard wood (shisham) made to shape for Chair CB Steel with/with out arms duly caned with 2 to 2.5mm wide half round as per godrej pattern with and including fixing with machine screw i.e bolt 75mm size with nuts and washers through holes in the wooden frame including painting with two coats of synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface complete all as specified.

(b) Removing old unserviceable flat iron and supply and fixing new flat iron 25mm x 3mm, 450mm long fixed under the wooden seat of the Chair CB steel with arms or without arms by welding (so that the wooden seat can rest on it) with and including painting the flat iron with two coats of synthetic enamel paint of approved colour over a coat of primer to match with existing colour complete all as specified and as directed. Note: Two Nos flat iron strip shall be provided to seat of each chair and cost of two strip shall be considered in one job.

(c) Left/right arms rest with nut and bolts of Chair CB with arms as per drg.

(d) PVC Ring /Rubber shoe as per drg.

(e) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel paint as per drg. Make-Asian Paints/Berger Paints

M & L for removing carefully following existing broken/unserviceable components/members of Book Case Four Door (TP) of size 914mm x 947mm x 32mm and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) M&L for removing of existing old used and unserviceable Glass Pane and fixing new Glass pane of size 710mm x 250mm long 3mm thick glass pane as shown on drawings.

(b) M&L for removing unserviceable Handle and providing new handle as shown on drgs.Make-Godrej

(c) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel paint as per drg.Make-Asian Paints/Berger Paints

M & L for removing carefully following existing broken/unserviceable components/members of Chair dinning cushioned (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Rear leg of size 30mm x 40mm x 900mm long made out of 1st class hardwood (Teak).

(b)Front leg of size 30mm x 40mm x 325mm long made out of 1st class hardwood (Teak).

(c) Front rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

(d) Rear rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

(e) Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).

(f) Vertical strips 15 x 30mm and 460mm long made out of 1st class hard wood (teak).

(g) Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood. Foam Make-Sleepwell and Plywood Make-Make- Greenply/Centuryply/Kajariaply/Duro/Nationalply

(h) Material & labour for preparation of all wooden surfaces of Chair dinning cushioned by removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed.

M&L for removing carefully the following existing broken / unserviceable fixtures / wooden members of Coffee Table with Glass Top (TP) and replacing new members duly finished of sizes as shown against each member, fixed in postion all as specified, shown on drawings and directed by Engr-in-charge :- (a) Glass Top of size 1200mm x 750mm x 12mm thick made out of hardened glass with smooth edges alround alongwith vacum cups for fixing with base made of Saint Gobain/ Modi Guard.

(b) Legs Made up of 1st Class Hard wood Teak as per the existing shape and size and removing the existing polish by scrapping with sand paper and making smooth surface and polishing with 2 coats of french polish and painting with Coffee colur as existing

(c) Foot rest made out of 1st class hardwood (teak) and removing the existing polish by scrapping with sand paper and making smooth surface and polishing with 2 coats of french polish and painting with Coffee colur as existing

(d) Material & labour for preparation of all wooden surfaces of Coffee Table by removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed.

M & L for removing carefully following existing unserviceable components/members of Hat Stand With Mirror (TP) size of and supply and fixing new components/members complete all as shown on drawing and directed:- (a) Plywood- Plywood for the back of board shall be 9mm thick and duly polished and sunmica to be pasted on front Side as per existing shade.

(b) Hooks for hanging of Caps will be as per the existing shape and size

(c) Glass for Mirror Will be as per existing shape and size and Make of Saint Gobain/ Modi Guard

(d) Material & labour for preparation of all wooden surfaces of Hat Stand with mirror by removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Side board with drawer (TP) and replacing new members duly finished of sizes as shown against each member, fixed in postion all as specified, shown on drawings and directed:- (a) Top of size 1860mm x 650mm made out of 18mm thick MDF board Two side decorative of approved shade (exterior grade) including sunmica edging alround.

(b) Sides of size 650mm x 455mm made out of 18mm thick MDF board two side decorative of approved shade (exterior grade).

(c) Shutter of size 775mm x 585mm made out of 18mm thick MDF board two side decorative of approved shade (exterior grade) duly furnish and polished.

(d) Drawer of size 115mm x 385mm duly furnish & polished fixed with telescopic channel as per drg.

(e) Drawer of size 180mm x 385mm duly furnish & polished fixed with telescopic channel as per drg.

(f) Stiffener made out of 1st class hard wood (teak) of size 25mm x 45mm x 1220mm.

(g) Back of size 1220mm x 635mm made of plywood 6mm thick commercial both sides.

(h) Knob of mild steel as per sample .

M & L for removing carefully following existing unserviceable components/members of King Size Bed (TP) and supply and fixing new components/members complete all as shown on drawing and directed:- (a) Top made up of 16MM MDF Board to be fixed with existing hydraulics and frame and duly fitting to the structure with appropriate nuts and bolt and screws.

(b) Back & Front frame made out of 16mm MDF Board Two Side of Coffee Colour of length 6' x 4' to be fixed with wooden frame made up of MDF Board

(c) Side Frame made out of 16mm MDF Board of size 6.5' x 3' and to be fitted with existing frame and fixing the hydraulics and nut bolts.

(d) Bottom Frame made out of 16 MM MDF Board of Size 6.5' x 6' and to be fitted with existing frame and fixing with appropriate nuts and bolts

(e) M & L for preparing old wooden surfaces of following furniture articles by removing old existing polish by washing with castic soda and rubbing with sand paper and applying French Polish complete all as specified, shown on drawings and directed by Engr-in-charge

M & L for removing carefully following existing broken/unserviceable components/members of Sofa Set 5 Seater (TP), Sofa Set 7 Seater (TP)and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Front leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.

(b) Rear leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.

(c) Arm Made out of 1st class hardwood (Teak) of size 70mm x 35mm and length as shown on drawing.

(d) Batten made out of 1st class hardwood (Teak) of size 20mm x 50mm & length as shown on drawing.

(e) Back frame made out of 1st class hardwood (Teak) of size 70mm x 35mm & length as shown on drawing.

(f) M&L for replacement of unserviceable seat/ back cushion with new 100mm thick with 40 density of size 560mm x 530mm x 100mm thick (Make - Sleepwell/Curlon) for sofa set all as specified and directed by Engr-in-charge.

(g) Removing carefully existing cover of seat/back cushion of size 560mm x 530mm x 100mm thick complete and material & labour for new cover of white long cloth not less than Rs 80/-per mtr and tapestry cloth of rate not less than Rs. 250/- per metre complete all as specified and directed by Engr-in-charge.

(h) M & L for preparing old wooden surfaces of following furniture articles by removing old existing polish by washing with castic soda and rubbing with sand paper and applying French Polish complete all as specified, shown on drawings and directed by Engr-in-charge

M & L for removing carefully following existing broken/unserviceable components/members of Table 2'x2' Godrej Pattern (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Top of size 600mm x 600mm made out of 18mm thick MDF board one side decorative of approved shade (exterior grade) including 5mm thick foam fabric over the top and fitted with base.

(b) Leg of size 60mm x 60mm at bottom x 750 mm long made out of 1st class hardwood (Teak) and covered with 5mm thick foam fabric fitted with legs.

(c) M & L for preparing old wooden surfaces of above furniture articles by removing old existing polish by washing with castic soda and rubbing with sand paper and applying French Polish complete all as specified, shown on drawings and directed by Engr-in-charge

M & L for removing carefully following existing broken/unserviceable components/members of Table Dinning 8 persons (TP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Side rail as per existing size made out of 1st class hardwood (Teak)

(b) Front /Rear rail as per existing size made out of 1st class hardwood (Teak)

(c) Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak).

(d) Top of size 1900mm x 900mm made out of one layer of 18mm thick MDF board one side decorative of approved shade on top and 12mm thick plywood at bottom including 30mm thick teakwood edging alround.

(e) PVC Shoes /Buffers.

(f) M & L for French Polish on complete Table dining 8 Pers after repairing including making base for receving of french polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Dressing (Gents) (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Top of size 300mm x 300mm made out of 18mm thick MDF board one side decorative of approved shade (exterior grade) including Sunmica edging alround.

(b) Drawer of size 260 x 260mm with drawer handle of approved size and shape.

(c) Handle of mild steel chromium plated as per sample.

(d) Mirror of size 300mm x 760mm, 5 to 6mm thick of Made- Saint Gobain/ Modi Guard.

(e) Back of mirror made of plywood 6mm thick commercial both sides of 300mm x 775mm.

(f) M & L for French Polish on complete Table dressing (Gents) after repairing including making base for receving of french polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Centre Sparkle with Glass (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Glass Top of size 1200mm x 750mm made out of Hardened/ toughened glass of transparent colour with smooth edges alongwith Vacum Cups for fixing with base

(b) Legs Made up of 200mm dia of Brass and polished with brass colour of existing shape and size and as per sample

(c) PVC Shoes as per sample.

(d) M&L for brass polish on complete Table centre after repairing including making base for receiving of brass polish on all new replaced legs components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table office offr wooden (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Top of size 1600mm x 900mm made out of 18mm thick decorative MDF board two side decorative of approved shade (exterior grade) including sunmica edging alround.

(b) Drawers of size 450mm x 280mm made out of 18mm thick decorative MDF Board two side decorative fixed with telescopic channel of 12" and fitted with table

(c) Side Panel of size 750mm x 900mm made out of 18mm thick decorative MDF Board two side decorative fixed with drawers and top of table with sunmica edging alround

(d) PVC Shoes /Buffers as per sample.

(e) M&L for french polish on complete Table office offr wdn after repairing including making base for receiving of French polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table office clk wooden (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Top of size 1600mm x 900mm made out of 18mm thick decorative MDF board two side decorative of approved shade (exterior grade) including sunmica edging alround.

(b) Drawers of size 450mm x 280mm made out of 18mm thick decorative MDF Board two side decorative fixed with telescopic channel of 12" and fitted with table

(c) Side Panel of size 750mm x 900mm made out of 18mm thick decorative MDF Board two side decorative fixed with drawers and top of table with sunmica edging alround

(d) PVC Shoes /Buffers as per sample.

(e) Shutters of size 300mm x 280mm made out of 18mm thick decorative MDF Board two side decorative fixed with drawers and table with sunmica edging alround,

(f) M&L for french polish on complete Table office clk wdn after repairing including making base for receiving of French polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Side of size 435mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)

(b) Shelf of size 380mm x 300mm made out of 18mm thick decorative MDF boarde of approved shade (exterior grade)

(c) Bottom of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)

(d) Back of size 380mm x 750mm made out of 18mm thick decorative MDF Board one side decorative face and other side commercial face.

(e) Top of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.

(f) M&L for french polish on complete Table bed side after repairing including making base for receiving of French polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Centre Black with Glass (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Glass Top of size 1200mm x 750mm made out of Hardened/ toughened glass of black colour with smooth edges alongwith Vacum Cups for fixing with base

(b) Legs Made up of 1st Class Hard wood Teak as per the existing shape and size and removing the existing polish by scrapping with sand paper and making smooth surface and polishing with 2 coats of french polish and painting with Coffee colur as existing

(c) Bottom Rail made up of 1st class hard wood teak as per the existing shape and size and removing the existing polish by scrapping with sand paper and making smooth surface and polishing with 2 coats of french polish and painting with Coffee colur as existing

(d) PVC Shoes as per sample.

(e) M&L for french polish on complete Table centre after repairing including making base for receiving of French polish on all new replaced wooden components all as directed by Engr-in-charge.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table dining 4 Pers/ 4'x3' (TP) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge:- (a) Side rail as per existing size made out of 1st class hardwood (Teak)

(b) Front /Rear rail as per existing size made out of 1st class hardwood (Teak)

(c) Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak).

(d) Top of size 1200mm x 900mm made out of one layer of 18mm thick MDF board one side decorative of approved shade on top and 12mm thick plywood at bottom including 30mm thick teakwood edging alround.

(e) PVC Shoes /Buffers.

(f) M & L for French Polish on complete Table dining 8 Pers after repairing including making base for receving of french polish on all new replaced wooden components all as directed by Engr-in-charge.

M & L for removing carefully following existing broken/unserviceable omponents/ members of Table Dinning 4 person 1200mm x 900mm and supply and fixing new omponents/members duly finished complete all as shown on drawing and directed (Drawing No FD/MAP/11/03) (a) Top of size 1200mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

(b) Leg of size 75mm dia at top and 40mm dia at bottom x 740 mm long made out of 1st class hardwood (Teak).

(c) Side rail of size 50 x 25 x 460mm made out of 1st class hardwood (Teak)

(d) PVC Shoes /Buffers.

(e) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Bin linen multipurpose and supply and fixing new components/members duly finished complete all as shown on drawing and directed (Drawing No FD/E6/MAP/09) (a) Top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround as per IS.

(b) Sides of size 675mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) as per IS.

(c) Shutter of size 675mm x 400mm made out of 18mm thick prelaminated MDF board one as per IS side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.

(d) Shutter of size 540mm x 400mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.

(e)Drawer of size 100mm x 400mm on stainless steel channel runner.

(f) Stiffener made out of 1st class hard wood (teak) of size 25mm x 25mm x 1200mm.

(g) Back of size 1200mm x 675mm made of plywood 12mm thick commercial both sides.

(h) Bottom of size 1200mm x 450mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade).

(j) Leg 1200 x 450 x 75mm made out of 1st class hardwood (Teak)

(k) Shelf of size 750mm x 410mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).

(l) Shelf of size 410mm x 364 made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).

(m) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Chair dinning cushioned and supply and fixing new components/members duly finished complete all as shown on drawing and directed (FD/E6/MAP/10) (a) Rear leg of size 30mm x 40mm x 900mm long made out of 1st class hardwood (Teak).

(b) Front leg of size 30mm x 40mm x 325mm long made out of 1st class hardwood (Teak).

(c) Front rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

(d) Rear rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

(e) Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).

(f) Vertical strips 15 x 30mm and 460mm long made out of 1st class hard wood (teak).

(g) Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood.

(h) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Chair Computer/Chair Revolving FD/E6/MAP/01 similar pattern and removing the existing unserviceable part with the following new parts (FD/E6/MAP-01) (a)12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping alround for seat and back (Seat size shall be 510x470x60mm and back size as shown on drawing) all as directed and shown on drawing. Make -sleepwell.

(b) Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user.

(c) Arm rest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert scratch and weather resistant.

(d) Castor wheel as per existing size and shape specified.

(e) Pedestal assembly injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castor.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side (MAP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed (FD/E6/MAP/15) (a) Top of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.

(b) Left/Right Side of size 450mm x 432mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade)

(c) Bottom of size 450mm x 450mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade)

(d) Back of size 500mm x 450mm made out of 6mm thick plywood and upper side/back decorative MDF board and 414mm x 90 mm, 18mm thick decorative MDF board of approved shade (exterior grade)

(e) Drawer of size 414mm x 100mm made out of 18mm thick decorative MDF boardwith 6mm thick ply wood bottom with handle as per approved by Engr-in-charge.

(f) PVC Shoes as per sample.

(g) M & L for French Polish on completeTable Bed Side (MAP) after repairing including making base for receving of french polish on all new replaced wooden components all as directed by Engr-in-charge.

Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg. (a) 12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping all round for seat and back. Make -Sleepwell.

(b) Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user.

(c) Arm rest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert scratch and weather resistant having slope towards front.

(d) Nut and bolt duly support for arm rest.

Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg. (a) Top 18mm thick prelaminated particle board as per existing size and shape duly funished and polished. Make -Century.

(b) Key board tray 18mm thick prelaminated particle board as per existing size and shape duly funished and polished.

(c) Drawer 18mm thick prelaminated particle board as per existing size and shape duly funished and polished.

(d) Sliding/ telescopic channel of table computer with new sliding channel of approved quality (replace in pair), complete all as specified, shown on drawing and directed.

(e) Handle as per existing size and shape as per drg.

(f) PVC Ring /Rubber shoe as per drg.

(g) M & L for French Polish on complete after repairing including making base for receving of french polish on all new replaced wooden components all as directed by Engr-in-charge.

Chair Verandah FD/MAP-II/06 similar pattern and removing the existing unserviceable parts with the following new parts as per drg. (a) 12mm thick seat and back made of PVC moulded along with 4x10mm ribs provided at around the outer edge & around the grooves of size as per drg.

(b) Hard PVC shoes as per drg.

(c) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal white paint as per drgs

Chair School steel with hand board FD/E6/MAP/05 similar pattern and removing the existing unserviceable parts with the following new parts as per drg :- (a) Top openable of size as per drg made out of 18mm thick prelaminated MDF board both side decorative of approval shade (Exterior grade) with PVC edging alround, hinged on Right Hand Side (RHS) screwed to & including 25mm dia mild steel tube with wall thicness 1.6mm inserted in 20mm dia mild steel rod welded to frame, steel surfaces powder coated. Drg No FD/E6/MAP/05. Make -Century.

(b) PVC Ring /Rubber shoe as per drg.

(c) PVC seat and back in one piece of size as per drg with 60mm lean distance fixed with screws.

(d) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black paint as per drgs

Rack Shoe Steel FD/E6/MAP/02 similar pattern and removing the existing unserviceable parts with the following new parts as per drg. (a) M&L for removing of existing old used and unserviceable MS Rod and fixing new MS Rod made out of 3MM Dia MS Rod of size 300mm long welded with 25MM Dia MS Pipe as shown on drawings.

(b) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG/Black paint as per drg.

Chair Varandah Steel FD/E6/MAP/11 similar pattern and removing the existing unserviceable parts with the following new parts as per drg. (a) M&L for removing of existing old used and unserviceable MS Strip and fixing new MS Strip made out of MS Strip of size 432 to 375mm long x 38mmwidth x 3mm thick welded with MS Pipe as shown on drawings.

(b) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG/Black paint as per drg.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Mirror Dressing (Gents) MAP and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed (Drwaing No FD/E6/MAP/16) (a) Mirror Should be 1150mm x 550mm with 5.5 mm thickness backed by 12mm thick phenol bonded ply with 50 mm x 28mm teak wood frame on all sides

(b) Sides shall be 18mm thick prelaminated particle board with teak wood edging.

(c) Bottom shall be 18mm thick prelaminated particle board with teak wood edging.

(d) Top shall be 18mm thick prelaminated particle board with teak wood edging.

(e) Shelves will be 8 mm thick glass with edges polished

(f) Back of mirror made of plywood 12mm thick of size 1200mm x600mm.

(g) Drawer made out of 18mm thick decorative MDF boardwith 6mm thick ply wood bottom with handle as per approved by Engr-in-charge.

(h) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of TV Trolley and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed by Engr-in-charge (Drawing No FD/E6/MAP/04) (a) Top of size 825mm x 825mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

(b) Sides of size 675mm x 682mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade)

(c) Back of size 675mm x 682mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade)

(d) Shelf of size 700mm x 640mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade)

(e) Shutter of size 682mm x 640mm made out of 5.00mm thick glass shutter openable with magnetic catcher as per drg.

(f) Castor 50mm dia swivel type.

(g) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Bed Side iron Hospital of size 1980mm length, 910mm width, 600mm heigth and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Main Frame strong and sturdy frame of mild steel with perforated 2 section top of 18 SWG (1.25mm) thickness and corner buffers

(b) Head & Foot Bows both side pre-laminated particle board of 20mm thickness. Panels framed in 31mm dia deachable 350mm hight stainless steel.

(c) Back Rest handle wound lever operated backrest at foot end. Handle to fold inwards when not in use.range 0-80 deg.

(d) Base Non trolley type base on legs with casters or on rubber feet. Tubler steel with 32mm dia

(e) Castores 100mm dia with brakes on opposite cornere

(f) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Bed Stead Fowler of size 2250mm length, 985mm width, 600mm heigth and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Main Frame 50x30mm rectangular pipe of 16 SWG (1.63mm) with perforated mild steel sheet top of 18 SWG (1.25mm) thickness provided with 4 corners buffers.

(b) Head & Foot Bows both side pre-laminated particle board of 20mm thickness. Panels framed in 31mm dia deachable 350mm hight stainless steel.

(c) Back and knee rest handle wound lever operated backrest at foot end. Handle to fold inwards when not in use.range 0-80 deg. Knee rise range 0-45 deg.Trendelenberg and RT upto +-15 deg. Height 620-825mm

(d) Base Non trolley type base on legs with casters or on rubber feet. Tubler steel with 32mm dia

(e) Castores 100mm dia with brakes on opposite cornere

(f) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Couch Examination Massage and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Mattress of size 1895mm x 510mm shoud be Urethane form as shown on drawing.

(b) Main frame tubular stainless steel frame and non trolley type of base as shown on drawing.

(c) Head rest of size 450mm length x 510mm width as shown on drawing.

(d) Upper section with 3 drawers and handle as shown on drawing.

(e) Lower section with 3 cabinet doors as shown on drawing.

(f) BP holder tray with 2.5cm raised margin, provided near head rest as shown on drawing.

(g) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Screen Moveable Steel of size 1680mm height x 2450mm width and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Main frame 2.5 Cms Tubular mild steel construction in 3 sections. Middle span of 1210mm and side span of 610mm width supplied with hooks and springs. Stainless steel shelved duly reainforced with SS push handle as shown on drawing.

(b) Castors 50mm of swivel type as shown on drawing.

(c) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Screen Moveable wdn and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Stool steel revovling and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Main frame tubular tripod steel construction with mild steel of 18 Swg with rubber feet as shown on drawing.

(b) Hight adjustable facility from 480mm to 680mm by screw machanism as shown on drawing.

(c) Top stainless steel revolving top of 300mm dia as shown on drawing.

(d) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

M & L for removing carefully following existing broken/unserviceable components/members of Stool steel and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- (a) Main frame of mild steel of CRCA quality of 22 dia press bent angle mounted on four rubber shoes as shown on drawing

(b) Top upholdtered 35cms dia foam with cover top fitted with strong and accurate machine screw as shown on drawing.

(c) Back rest of CRCA muld steel fitted to the main frame at a height of 12" from the top as shown on drawing

(d) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

(e) M & L for removing carefully following existing broken/unserviceable components/members of Table bed side steel hosp and Table dispensary and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- Castor swivel type as shown on drawing

(f) PVC Ring /Rubber shoe as per drg.

(g) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel Ivorywhite/white/warm gray paint as per drg.

Charpoy GI pipe ply top similar pattern, Removing the existing unserviceable part with following new part as per Drg FD-220 (a) Removing existing unserviceable 12 mm thick ply top from Charpoy GI pipe, tightening complete charpoy i. e. loose check nuts, elbows, long rails & short rails and supply and fixing new plywood top 12mm thick , 7 ply commercial type, ISI marked , BWR grade of size 2020mm x 940mm on top (ply shall be provided in single piece for each charpoy) with 12 Nos galvanised iron nuts and bolts 6mm dia and 70mm long including sufficent numbers of GI washers of suitable size/thickness on top to maintain the plywood top in leveled position and one GI (heavy duty) washer on underside before tightening the nuts including embossing 'MES' with paint on all four corners of plywood top, complete, all as specified and directed. Note :- the size of plywood top viz 2020mmx 940mm shall be firm. No tolerance in size of plywood top shall be accepted. The plywood shall be provided in single piece for each (Drg No. FD-220)

(b) Removing unserviceable stiffeners from Charpoy GI pipe and supply and fixing 02 Nos of square MS tube size 32mmx32mmx16 guage thick 836mm long(Appx) fixed on long rail, Painted with two coats of synthetic enamel black paint over a coat of red oxide primer, 01 Nos nuts & bolts consist of washer fix with plywood on each tube, Welding the square tubes between two long rails at equal spaces to the centre including two holes on MS tubes, at equal space and directed by Eng- in - charge

(c) M&L removing old unserviceable long rails from Charpoy GI pipe and supply and fixing new long rail of size 1884mm long made out of 32mm bore medium grade GI pipe duly threaded on both ends and locked with Check Nut on each side and fixing to charpoy complete all as specified and directed.

(d) M&L removing old unserviceable short rails from Charpoy GI pipe and supply and fixing new short rail of size 814mm long made out of long rails retrieved vide item 1 (c) here-in-before duly threaded on both ends and fixing to charpoy complete all as specified and directed.

(e) M&L removing old unserviceable legs from Charpoy GI pipe and supply and fixing new legs of size 394mm long made out of short rails retrieved vide item 1 (d) here-in-before duly threaded on one end and fixing to charpoy complete all as specified and directed.

(f) M&L removing old unserviceable 3 way elbow from Charpoy GI pipe and supply and fixing new elbow 32mm bore (ISI ,marked) to charpoy complete all as specified as per drg.

Bed Hard FD/E6/MAP/08 similar pattern. Removing the existing unserviceable part with following new part as per Drg. (a) Removing Existing unserviceable Ply Wood and fixing new Ply Wood of size 1974 x 904mm made out of 12mm thick BWR commercial ply.

(b) Rubber shoe for leg

(c) M & L for spray painting two coats with black colour first quality synthetic enamel paint on all steel and iron surface complete Bed after repairing and all as directed by Engr-in-charge.

Charpoy folding IP with hard top similar pattern. Removing the existing unserviceable part with following new part as per Drg FD-388 (a) Removing existing unserviceable 12 mm thick plywood top from charpoy folding IP and supply and fixing new plywood top ,12 mm thick, commercial type ,ISI Marked ,BWR grade of overall size 1990 mm x910 mm on top (plywood shall be provided in two equal pieces for each charpoy with appropriate gap in middle to facilitate folding of charpoy with 12 numbers of Nuts & bolts with GI washers of suitable size/thickness on top ,maintaining the plywood top in leveled position and one GI washer on underneath before tightening the nuts all as specified & directed.

(b) M & L for preparation of steel & iron surfaces of charpoy folding IP and spray painting two coats with synthetic black colour first quality synthetic enamel paint on all steel & iron surfaces complete all as specified shown on drawings and directed.

Charpoy with Hard Top wooden similar pattern. Removing the existing unserviceable part with following new part (Drawing No FD/MAP-II/01) (a) Removing Existing unserviceable Ply Wood and fixing new Ply Wood of size 1930 x 850mm made out of 12mm thick BWR commercial ply.

(b) M & L for preparation of steel &iron surfaces of charpoy with hard top and spray painting two coats with black colour first quality synthetic enamel paint on all steel and iron surface complete as directed by Engr-in-charge. Note: (i) All Plywood and MFD Board will be Make- Century/ Kitply/ Archid/ National/ Anchor as directed by Engr-in-charge. (ii) All Cushion and Mattress will be Make - Sleepwell or equivalent as directed by Engr-in-charge. (iii) All MS Steel Items will be Make- SAIL/TATA/Jindel. (iv) All Handle and Hook will be Make- Godrej or equivalent as directed by Engr-in-charge. (v) Paints and Polish will be all side of furniture and Make- Asian Paints/ Berger Paints/ British Paints/ Nerolac. (vi) All Glass/ Mirror will be Make- Modiguard/ AIS as directed by Engr-in-charge. (vii) All wood items will be Teak Wood Ist Class. (viii) All repair work carried out at GE Alwar furniture yard. (ix) Contractor should depute one Carpenter with helper and required tools on daily basis for routine work and no extra payment will be made out of this account as directed by Engr-in-charge.

Anand Construction (BID ID -3454775)

shiva construction (BID ID -3459360)

Techno India Enterprises (BID ID -3459526)

M/S CHANDER SHEKHAR (BID ID -3459153)

M/S Tanisha Traders (BID ID -3459447)

M/s godara infratech and power industries (BID ID -3459520)