GE/ALP (8185B) KOLKATA OF 2023-24

Amount

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 15mm thick plastering on other than fair faces of ceiling surfaces in cement mortar (1:4) finished the surface even and fair complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in cement (1:4) surface finished even and fair complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces complete all as specified and directed.

M&L for old decorated walls surfaces and applying 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of plastered and unplastered surfaces of old decorated walls and applying one coat of acrylic oil emulsion distemper complete all as specified and directed.

M&L for old decorated walls and applying two coat of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparation of plastered and unplastered surfaces of old decorated ceiling and applying one coat of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparing and removing existing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coats of acrylic oil emulsion with wall care putty complete all as specified and as directed.

M&L for preparing new decorated plastered or unplastered surfaces of ceiling, pillasters, cornices etc and applying coat of 3 mm thick wall care putty with two coats acrylic oil emulsion complete all as specified and as directed.

Taking down eaves gutters and rain water pipes ,cast iron pipes(any size or pattern), including all fittings, heads, shoes, bends, over fittings and accessories) complete all as specified and directed.

S&F for PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints and laid in fixed in floor complete all as specified and as directed.

S&F for PVC (SWR)110 mm bore pipes single socketed in any length with rubber ring joints and fixed to wall complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

S & F in repair 100 mm bore (spun)sand cast iron soil waste pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S & F in repair 150 mm bore(spun) sand cast iron soil waste pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S & F in repair 100 mm bore(Spun) sand cast iron soil waste pipes bends fixed with cement joints, fixed to walls complete and all as specified and directed.

S & F in repair 100 mm(spun) cast iron branch pieces, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches , bore of pipe 100mm complete all as specified and directed.

S & F in repair 150mm bore (spun)sand cast iron soil waste pipes bends fixed with cement joints, fixed to walls complete all as specified and directed.

S & F in repair 150mm cast (spun) iron branch pieces, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches , bore of pipe 150mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in cement mortar (1:4), complete all as specified and directed.

M&L for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles n.exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry over bedding layer of scread bed 15 mm thick in cement mortar (1:4) and pointed in white/colour cement to match. complete all as specified and as directed.

M&L for granite(of any type) tiles 20 mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar (1:4) including grinding & polishing fixed in slab/steps complete all as specified and directed.

Material and labour for 18-20 mm thck machine cut Kota Stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Taking down aluminium door(any size) change of pivot, beading, gasket, setting of door and change of damaged style /rail any length in aluminium section thickness not less 1.55 mm match with existing anodised /power coated complete and refixing in same position complete all as specified and directed.

S&F for Powder coated aluminium sliding windows for two track with powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 64mmX25 mmX1.55mm and shutter of section 20mm X 20mm X1.55mm including (fixing of 4.8 mm thick glass) and taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions complete all as specified and as directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area not exc 1.5 sqm each complete all as specified and directed.

S&F for factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube,incl holdlfast complete all as specified and drawing.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of 10mm thick plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing.

S&F for 100 mm long butt hinge, stainless steel complete all as specified and as directed.

S&F for aluminium anodised handles cast type, anodised 150mm long complete all as specified and as directed.

S&F for aluminium anodised tower bolt cast type, anodised 200 mm long complete all as specified and as directed.

S&F for 300mm long aluminium sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and directed.

S&F in repairs wall mounted urinal of size 375x390x590 mm fixed in wall with heavy scews with waste coupling and waste pipe complete all as specified and directed. (size -375x390x590 mm Make Cera /CAPRIANA Cat No:- S4020112)

S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg complete and all as specified and directed.

S&F for Powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 95 mm x 38 mm x 3.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 95mm x 38mm x 3.00 incl taking down old door with necessary all fitting and all necessary fittinngs complete all as specified and as directed.

S&F in repair 5 mm thick beveled edge best quality looking mirror of size 600x450 mm fixed with screws complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel/aluminium frames glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4.8 mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane. complete all as specified and directed.

M&L for 12 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and directed.

M&L for cutting opening in cement concrete wall cutting upto a depth of 2.5cm trimming surface as required,girth exc. 30cm and making good with cement plaster (1:6) complete all as specified and directed.

S&F for PVC ventilator fixed type half portion 4 mm frosted glass and half portion stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm including fixing of ventilator incl taking down old ventilator complete all as specified and directed.

S&F in repair sinks with drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 925mmx460mm and bowl size and 410mmx330mmx160mm complete and all as specified and directed.

S&F in repair sinks without drainage board made of stainless steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mmx330mmx160mm complete all as specified and directed.

S & F in repair waste coupling of PTMT 32-40mm dia (half or full threaded) (minimum weight -45 gms) complete all as specified and directed.

S & F in repair stainless steel toilet paper holder fixed with CP screws in wall , complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair 110/125 mm floor trap fixed in floor with grating incl jointing with solvent cement concrete 1:2:4, complete all as specified and directed.

S&F in repairs 32 mm dia waste pipe for wash hand basin and urinal down pipe complete all as specified and directed

S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia complete all as specified and directed.

S&F in repair 15mm bore CP angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia CP stop cock(cocealed type), with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore CP pillar taps, with capstan heads, chromium plated, fancy type screwed down for pipe, high pressure ,complete all as specified and directed.

S&F in repair 15mm bore PVC angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia PVC bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia PVC Pillar tap, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 25 mm dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F for ball valve high pressure of PTMT 25 mm bore ( minimum weight 210gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore chromium Plated, with capstan heads, fancy type screwed down for pipe, high pressure HOT and COLD mixer tap with long screwed shanks and fly-nuts, complete all as specified and directed.

S&F in repair 600 mm long PVC connection 15 mm size with PTMT nut complete all as specified and directed .

S&F in repair 15 mm bore Brass CP Surgical Elbow operated mixer tap for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. Make: Jaquar Cat No FLR-CHR 5166 or equivalent as specified in PS.

S&F in repair 15 mm bore Brass CP Surgical Elbow operated wall tap screwed down for iron pipe and fixed all as specified and directed. (Make: Cera cat no-F9030152) or equivalent as specified in PS.

S&F in repair 15 mm bore brass CP Surgical Elbow operated pillar tap screwed down for iron pipe and fixed all as specified and directed. (Make: Cera cat no-F9030453) or equivalent as specified in PS.

S&F for Wall Mounted Grab bar/Hand Rails for disable pateints 600 mm long fixing in wall complete all as spd and directed. Make :- Cera (Cat No B2210106) or equivalent as specified in PS.

S&F for vitreous china counter wash hand basin Ivory colour, white, flat back, size 550mm x 400mm, but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Make :- Cera (Cat no-S2030103) or equivalent as specified in PS.

S&F 15 mm bore pillar cock swan neck spout and aerator, Chromium Plated, with capstan heads, chromium plated, fancy type screwed down for pipe, high pressure with long screwed shanks and fly-nuts complete all as specified and directed. (Make :- Cera (Cat No- F 2008105)) or equivalent as specified in PS.

S & F in repair vitreous china wash down water closet one piece floor mounted (Pedestal) of size 655x370x730mm including PVC seat cover closed pattern with flat bottam and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc (Make:- Cera cat no S1014124(Citrus)) or equivalent as specified in PS.

Taking up or down 15mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed (upto 8 storey bldg).

Taking up or down 20mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed (upto 8 storey bldg).

Taking up or down 40 mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed (upto 8 storey bldg).

Taking up or down 25 mm to 32 mm bore steel water tubing pipe and connections complete all as specified and as directed.

S&F for galvanised 15mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed (upto 8 storey bldg).

S&F for galvanised 20mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed (upto 8 storey bldg).

S&F for galvanised 40 mm mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed (upto 8 storey bldg).

S&F for galvanised 25mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed.

S&F in repair 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as specified and as directed

S&F in repair 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed

S&F in repair 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed

S&F in repairs CP Towel rail 600 mm long 20mm dia fixed with and including chromium plated brass screws & wooden/plastic cleats complete all as specified and directed.

Cleaning and dusting of GI pipes line 15 to 25 mm dia by GI wire and pressure pump and washing down whole GI line complete all as specified and as directed

S&F in repair CP Health faucet with all necessary fittings . Make : PRAYAG & equivalent complete all as specified and as directed

S&F in repair PVC Health faucet with all necessary fittings . Make : PRAYAG or equivalent

Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and as directed

M&L for RCC(Nominal Mix) in type-B1 (1:2:4) (using 20mm graded stone aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

Dismantling of existing expansion joint system and M & L for applying TPO/FPO based joints sealing membrane, Sikadur Combiflex SG (150x2mm) with epoxy adhesive, Sikadur 31 C ( the joint shall be packed withing polystyrene board before application of Combiflex ). Then providing Sika pllystrene sealant into the gap after proper surface prepration after filling the gap with polyurethene backer rod, followed by precast RCC slab (1:2:4 ) 50 mm thick placed over the joint with minimum 150 mm projection on either side with proper drip course of size (length) n.exc. 1.2 mtr each and sealing the joints of precast RCC slab with exterior grade silicone sealant of size i.e. 10 mmx 10 mm balance with polystrene board complete all as specified and as directed.

S&F in repair 15 mm bore CP shower fancy type 150mm long neck complete all as specified and as directed

S&F in repair 20 mm bore MTA/FTA/ELBOW/TEE for CPVC Pipes complete all as specified and as directed

S&F in repair 25 mm bore brass Tee/Elbow for CPVC complete all as specified and as directed

Material & Labour for grinding and polishing of old kota stone.marble granite flooring, landing, risers,steps ,mosaic floor/wall complete all as specified and as directed.

S&F in repair stainless steel soap dish fixed in wall with screws complete all as specified and as directed

Dismantling water tank of capacity exc. 500 Lt but n.exc.1000 Lt, open or closed and removing to stores complete all as specified and directed.

Dismantling water tank of capacity exc. 1000 Lt but n.exc.2000 Lt, open or closed and removing to stores complete all as specified and directed.

S&F for 1000 ltr capacity rotational moulded polyethyene water storage tank (cylinderical vertical with closed top)of , hoisted and fixed in position complete all as specified in SSR Part-I

S & F for 2000Ltrs cap rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully sub main wiring of size upto 16 Sqmm including making good disturbed surfaces of walls, ceilings etc complete all as specified and as directed

Material and labour in repair for point wiring for modular fitting, for one light/fan/call bell point with 1.5 sqmm PVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade, concealed type, controlled by one way switch including 1.5 sqmm PVC FRLSH insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through non metallic rigid PVC heavy duty concealed conduit of size 25mm dia with wall thickness not less than 1.6 mm including conduit accessories like bends, tees junction boxes, etc including 1.5 Sq mm, single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, complete after and making good the distrubed surfaces as per the existing complete all as specified and as directed.

All as per item No 111 here-in-before but for one light point controlled by two way switch complete all as specified and as directed

All as per item No 111 here-in-before but for 3 pin 6 Amps socket outlet modular type on the same board with 1.5 sqmm cable complete all as specified and as directed

All as per item No 111 here-in-before but for 3 pin 6 Amps socket modular type on the independent board with 1.5 sqmm cable complete all as specified and as directed

All as per item No 111 here-in-before but for socket modular type 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 1.5 sqmm copper conductor cable as earth continuity conductor complete all as specified and as directed

Supply and Fixing in repair modular switch single pole, one way, 6 Amp, 1 module, complete all as specified and directed.

Supply and Fixing in repair modular switch single pole, one way, 16 Amp, 1 module, complete all as specified and directed.

Supply and Fixing in repair modular Socket, 6 Amp, 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and Fixing in repair modular Socket, 6/16 Amp, 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and Fixing in repair modular switch single pole, two way, 6 Amp, 1 module, complete all as specified and directed.

Supply and Fixing in repair modular Bell push 6 Amp, single pole, 1 module, complete all as specified and as directed.

Supply and Fixing in repair bell multi music type, complete all as specified and as directed.

Supply and fixing in repair ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed.

Supply and Fixing in repair Modular step type fan regulator, 120W, 2 module, complete all as specified and as directed.

Material and labour in repair for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through suitable size of non metallic rigid PVC heavy duty of size 20/25 mm dia having wall thickness not less than 1.2mm/casing & capping with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick bakalite sheet cover or for fixing of switch/sockets/regulators etc as per site requirement after and making good the distrubed surfaces as per the existing complete all as specified and as directed.

All as per item No 125 here-in-before but for one light point controlled by two way switch with 1.5 sqmm cable complete all as specified and as directed.

All as per item No 125 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete all as specified and as directed.

All as per item No 125 here-in-before but for 3 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete all as specified and as directed.

All as per item No 125 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 2.5 sqmm copper conductor cable as earth continuity conductor complete all as specified and as directed

S & F in repair socket outlet 2 in 1, 5 pin 5 Amp,230 Volts flush type.

M & L in repair for switch socket combination 2 in 1, 5 pin 5 Amps, 240 V Flush type, all as specified.

Supply and fix in repair switch socket combination 2 in 1,5/15 Amps, 230 Volts, flush type universal complete all as specified and as directed.

Supply and fixingin repair switch piono, flush type 5 Amps 230 Volt single pole, one way complete all as specified and as directed.

Supply and fixingin repair switch piono, flush type 5 Amps 230 Volt single pole, two way complete all as specified and as directed.

S&F in repair bell push, flush button single pole 6 amps 230 volts AC with polycarbonate body complete all as specified and directed.

Supply and Fixing in repair for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc including taking down old unserviceable regulator complete all as specified and as directed

Supply and Fixing in repair of MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA. (Make-Legrand Cat No-4085-87 to 4085-95 or equivalent in L&T,ABP,Havells)

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as directed. (Make-Legrand Cat No-4086-18 to 4086-20 or equivalent in L&T, ABP, Havells)

Supply and fixing in repair MCB TPN, 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified and as directed. (Make-Legrand Cat No-4087-02 or equivalent in L&T,ABP,Havells)

Supply and fixing as in repair MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Material and labour for sub main wiring for main DBs to Sub DBs with standard copper conductor 1100 volts grade of size 2.5 sqmm two runs of multistrand unsheathed PVC insulated cable (Red colour cable used for live connection & Black colour cable used for neutral connection) and 2.5 sqmm copper multistrand conductor 1100 volts grade multistrand un-sheathed PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC conduit / casing caping of size 25mm for including of all accessories after taking down existing sub main wiring and make good surface as per existing complete all as specified and directed. Note : Three runs of 2.5 sqmm and with PVC conduit shall constitute one unit.

All as per item No 144 here-in-before but with 4 sqmm cable.

All as per item No 144 here-in-before but with 6 sqmm cable.

Supply and fixing in repair building security lighting of LED 35 watts high efficennt lighting solution anodised with heat resistance with accessories provided including necessary electric connection with all accessories required for fixing/mounting with nut bolt washer & clamp support on GI pipe1.5 meters long of suitable diameter complete all as specified and directed. (Make- Havells Cat No:ENDCITYLITPLAT+SL35WLED757 SASYBOPCWOSPD or equivalent make of CG/Bajaj/philips)

Supply and fixing in repairs main stream battens fitting LED 20 watt with tube 4 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed. Make: Havells Cat No LUMILINEBS20WLED865SPCWH or equivalent make of CG/Bajaj/philips)

Supply and fixing in repairs main stream battens fitting LED 10 watt with tube 2 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed. (Make: Havells Cat No LUMILINEBS10WLED865SPCWH or equivalent make of CG/Bajaj/philips)

Supply and fixing in repairs design from the renaissance era yet with a modern look using new generation technology in 35W LED to enliven outdoor areas in perfect synchronization with functionality and aesthetics. IP66 Family of post top lantern designed to complement the geometry of the area including all accessories and connection complete all as specified and as directed. (Make :- Havells Cat Part No VICTORIAPT35WLED757PSYMTOTG or equivalent make of CG/Bajaj/philips)

Supply and fixing in repairs aesthetically designed decorative hot dipped galvanised mild steel step 3M pole with grey powder finish. Compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300 x 110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole including necessary PCC work complete all as specified and directed. Havells Cat Part No DECO POLE 3M TOP dia 76mm or equivalent make of CG/Bajaj/philips)

Supply and fixing in repairs Aviation yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories including suitable dia GI pipe for fixing of light with all fixing arrangement including PCC, electrical connections complete all as specified and directed. (Make : Bajaj Cat No 24973 BJAOL 2 BC or equivalent make of CG/Bajaj/philips)

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 500 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on complete all as specified and as directed

Supply and fixing for earth continuity conductor of 25x4 mm galvanised iron strip with saddle and fixing screw for conductor above ground, complete all as specified and as directed

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same as directed Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Rewinding of ceiling fan, 1200mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable for electric connection complete all as specified and as directed

Supply only ball bearing of size 6201/6202/6203

Supply only capacitor for ceiling fan 2.25 MFD complete all as specified and directed.

Taking down exhaust fan/wall mounted fan of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Rewinding of exhaust fan, 300mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed.

All as per item No 160 here-in-before but for 350 mm sweep.

Supply only capacitor for exhaust fan 3.15 MFD complete all as specified and as directed

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed

Supply only thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater.

Supply only indicating lamp, 230 V, flush type, rectangular, red and green indicator suitable for water heaters.

Supply only for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty.

Supply only for apparatus plate , including suitable for water storage heater type 25 ltrs capacity.

All as per item No 168 here-in-before but fixed in repair for 50 ltrs capacity.

Supply and fixing as in repair for fusible plug , calibrated 95 deg to 100 deg C suitable for water heater.

Supply and fixing as in repair for PVC insulated flexible copper conductor cable (FRLS) 4 Sqmm 3 core , 1100 Volts grade conforming to IS 694.

Supply and fixing in repair rubber gasket for appratus plate of any type/capacity complete all as specified and as directed

SEN ELECTRIC WORKS

NUPUR CONSTRUCTION

R.R.ENTERPRISE

DK Contractor

ESS PEE UDYOG