8139 SPECIAL REPAIR TO T 14 T 1A AND T 1B OPS BLOCK AND ADMIN BLOCK AT TRATA WORLI AND PROVISION OF 20 IN NOS HERITAGE LIGHT AND POLES FROM MAIN GATE ENTRANCE TO MANOR HOUSE UNDER GE NW KUNJALI

Amount

M&L Examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5 -10 mm depth without damaging existing rebars, carefully removing unsound weak/ loose concrete/ cover & concrete around the rebars upto 10 mm depth by low impact high frequency hammer/ chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis outside the premises, etc, complete all as specified and directed necessary scaff -folding complete all as specified and directed .

M&L for cleaning existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and applying two coats of alkaline rust converting primer Sika RustOff 100 or equivalent make approved by GE or ReArm Rust Remover with brush on the existing rebar for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed. Note: Work to be executed by the authorised applicator of manufacturer only.

M&L for Drilling & Re baring of 12 mmdia x 120mmdeep, thoroughly coated with Zinc based reinforcement epoxy AquaArm CoatZP or equivalent make approved by GE complete all as specified and directed .

M&L Providing and Application Aqua Arm Coat-ZP or equivalent make approved by GE as passivator/ Anti corrosion coating to the steel reinforcement shall be applied The material shall be two component cement based polymer modified two component coating for corrosion protection. The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted complete all as specified and as directed by Engr-in-charg. This shall include surface preparation and erection of steel props as required for the application complete all as specified and directed . Note: Work to be executed by the authorised applicator of manufacturer only.

M&L of two component solvent free epoxy bonding agent Sika Sikadur 32LP/ ReArm Superbond or equivalent make approved by GE or equivalent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or latiance. The material is supplied as a two part material in pre weighed quantities for ready onsite mixing and use.2.The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction complete all as specified and directed . Note: Work to be executed by the authorized applicator of manufacturer

Rebuilding the section of damaged RCC elements to its original size in thickness of 25mm by hand or spray application by Providing and applying Sika MonoTop@- 122F or equivalent make approved by GE single component, fibre reinforced, sulphate resistant, low shrinkage, high performance cementitious structural repair mortar or by micro concreting in the ratio of 1:2:4 added with water proofing admixture WP-10 or Sika Latex SBR or equivalent make approved by GE complete all as specified and directed . Note: Work to be executed by the authorised applicator of manufacturer

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed .

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed .

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

Taking down cement plaster of any description on brick, stone or concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water upto 3 rd floor of bldg incl scaffolding complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed .

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even complete all as specified and directed .

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed . .

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer complete all as specified and directed .

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed . .

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed .

Preparing old decorated surfaces as in walls soffits & facias of beams, chajjas etc complete by washing, rubbing down & stopping making good the surface & applying 2 coats of weather proof Acrylic based paint (100% Acrylic) exterior Gde complete all as specified and directed . .

Preparing new plastered surfaces as in walls soffits & facias of beams, chajjas etc complete by washing, rubbing down & stopping making good the surface & applying 2 coats of weather proof Acrylic based paint (100% Acrylic) exterior Gde complete all as specified and directed . .

Supply only integral water proofing compound complete all as specified and directed . .

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing and direction complete all as specified and directed .

S&F 30 mm thick Factory made moulded solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed . .

S&F powder coated aluminium of various section as required for doors, window & partion etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc complete all as specified and directed .

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick complete all as specified and directed .

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed . .

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed .

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed .

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed .

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed .

S&F butt hinges 100 mm Stainless steel hinges medium weight complete all as specified and directed .

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rabbish of the premises complete all as specified and directed . .

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness complete all as specified and directed .

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair complete all as specified and directed .

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . Note :Colour & pattern shall be approved by GE

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 complete all as specified and directed . Note :Colour & pattern shall be approved by GE

M&L double charge premium quality virified ceramic light shade tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M&L double charge premium quality vitrified ceramic light shade tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M&L for 20 mm thick granite maching cut as in steps, window cills, cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note: Colour of granite shall be approved by GE

M &L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed .

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed .

S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS1161-1979 complete all as specified and directed . .

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any thickness including cover fillets complete all as specified and directed .

M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern complete all as specified and directed .

S&F in repairs 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed .

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed .

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs

S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed . .

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed . .

Supply only cast iron 'P' trap 100mm dia complete all as specified and directed .

S&F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and directed . .

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed .

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed .

S&F in repair table top wash hand basin vitreous china Cat part No JDS-WHT-25909 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed .

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed .

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed . Make: Cat log No FUS-29001 of Jaquar or equivalent make from list of manufactures.

S&F in repairs fancy type cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed complete all as specified and directed . Make: Cat log No FLR-5357N of Jaquar or equivalent make from list of manufactures..

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified and directed .Make: Cat log No CON-037KN of Jaquar or equivalent make from list of manufactures..

S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified and directed. Make: Cat log No CON-041KN of Jaquar or equivalent make from list of manufactures..

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed complete all as specified and directed.Make: Cat log No CON-053 KN of Jaquar or equivalent make from list of manufactures..

S & F in repairs Stainless steel single towel rail 600mm long complete all as specified and directed.Make: Cat Log No CAN-1111NM of Jaquar or equivalent make from list of manufactures..

S & F in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece complete all as specified and directed.

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and directed.

S&F 32 mm dia WHB/urinal flexible waste pipe complete all as specified and directed.

S&F in repairs toilet paper holder of vitreous china (White) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F Corner glass shelf with brackets complete all as specified and directed. (Make - Jaquar CAT PART NO- CAN-1173 or equivalent make from list of manufactures. )

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-1989 or equivalent make from list of manufactures.) complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling water tanks and exc 1000 litres & n exc 2000 litres capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tank of 5000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. .

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. .

M & L preparation of plastered surfaces and applying two coats of smart Care Damp block 2K or equivalent acrylic polymer modified cementious high performance coating including smart care crack seal coat complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing complete all as specified and directed.

S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. .

S&F UV PVC wall /ceiling paneling consisting of 3 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. .

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc for One light point controlled by one switch complete all as specified and directed.

All as per item No. 91 above but for One Fan/bell point controlled by one 5A switch complete all as specified and directed.

All as per item No. 91 above but for One 5 Amps switch socket combination on independent board complete all as specified and directed.

All as per item No. 91 above but for One 5A flush type switch socket point on same board board complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc for One 5pin, 15 Amps switch socket combination on independent board complete all as specified and directed.

M&L for point wiring (Work station for computer) complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 03 Nos 5A sockets with 1.5 sqmm and 01 No 15A socket with 4.0 sqmm on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

M&L for submain wiring with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and directed. Note: 2 runs of 4 Sqmm cable and one run of PVC casing caping shall be measured as one unit.

M&L for submain wiring with 4 runs of 4 sqmm and 1 run of 4sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and directed. Note: 2 runs of 4 Sqmm cable and one run of PVC casing caping shall be measured as one unit.

S&F LED batten fitting 2 x 21W, with heat shrinkable T8 batten fittings 2 nos. 21W cool white each complete all as specified and directed.

Supply and fix switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module complete all as specified and directed.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module complete all as specified and directed.

Supply and fix FAN REGULATOR , modular type 1 way 120W 2 module 240 volts flush type complete all as specified and directed.

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 4 way, 440 volts with 100A Copper Busbar rating 440 Amps, for each phase, 2 Neutral bar, 2 Earth bar, dust and vermin proof with provision for DPX³ 160 MCCB as incomer DP MCB/Isolator/RCCB/RCBO as sub incomers and SP MCB's as outgoing etc.complete all as specified and directed. Make - Legrand cat No 5077 50 or equivalent make in list of manufactures

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 41 or equivalent make in list of manufactures

Supply and fix MCCB 4pole 125A, 16kA complete all as specified and directed.

S&F MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S&F MCB SP 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S&F MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl complete all as specified and directed. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm GI pipe light grade for protection complete all as specified and directed. .

Supply and fix sheet metal enclosure with 2 pin and earth plug and socket complete with single pole MCB of 20 Amps complete all as specified and directed.

S&F EXHAUSTfan 300 mm sweep 240 volt 50 HZ AC, as per site requirement and all connected accessories and civil work.incl taking down and submitting to MES store.

S&F Air circulator fan 600 mm sweep 240 volt 50 HZ AC, as per site requirement and all connected accessories and civil work.incl taking down and submitting to MES store complete all as specified and directed.

Supply and erecting of cast iron 5 to 8 mtr long Heritage type street light pole with double Arms duly painted duly fixed with 2 x 20 W LED post top light including excavation, earth work, PCC as in foundation, nuts, bolts, washers of any size complete all as specified and directed. Note: Excavation, Earth work, PCC(1:3:6) type C2 foundation and PCC(1:2:4) type B1 coping etc are deemed to be included in the quoted rate. ii) FRP outdoor loop box alongwith 3 pole connector and 06 amps MCB to be included in the quoted rates

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core. Note: Rate of under ground cable includes cutting of hard surface and matching, earth Work, sand cushioning, PCC cover, light Grade GI tubing where necessary,testing etc complete all as specified and directed.

S & F MCB FP 32 Amps,10KA , 'C' curve, complete all as specified and directed.

Supply, fabrication, installation, testing & commissioning of LT Panel board for 415 volts,4 wire system, cubical type in door type, dust and vermin proof, made out of 2mm thick CRCA sheet, front openable doors having aluminium bus bar of capacity 600 amps for phases and 300 amps for neutral including powder coated painting, internal wiring with suitable size of stranded copper conductor cable,CTs, foundation, supporting channels,cable termination,cable gland, hinged cover with gasket complete etc all as directed and suitable to accommodate the following switch gears and meters :- a) MCCB 400Amps 4pole,36 KA,Thermal magnetic - 2 Nos (Incoming ) (Power supply & DG Supply b) MCCB, 3 pole 100Amps,16KA,Thermal magnetic- 2 Nos (Out going) c) MCCB, 3 pole 250Amps,25KA,Thermal magnetic- 2 Nos (Out going) d) Manual changer over 250 Amp , 415 Volt AC , 4 Pole & Size F2 - 01 Nos e) Digital type Volt meter , digital type ,0 - 500V - 1 Nos, Make : L&T/Scinder f) Digital type Ammeter, digital type with CT's - 1 No Make : L&T/Scinder g) Indication lamps (R,Y,B) LED type - 1 set Note: Dismantling of old panel/cable cost are deemed to be included

Laxmi Sales (BID ID -3126345)