ADDN/ ALTN BLDG NO P-25, O-10 (RUSSEL BLOCK), O-18 AT AOI, PROVN FOOTPATH FOR SM-12 (BALL TOWER) AND PROVN OF 02 X TOWER ACs , 05 X SPLIT AC AND 06 X EXHAUST FANS INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed.

Taking down chowkat or frame with shutter ( with out taking off shutters from the frame ) area exc 1.50 and n.exc 4.00 sqm all as specified and directed.

Taking down chowkat or frame with shutter ( with out taking off shutters from the frame ) area n.exc 1.50 all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F 125mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm long aluminium anodised handles, cast type complete all as specified and as directed .

S&F 100mm butt hinges stainless steel medium weight complete all as specified and as directed .

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including concrete making good to floor complete all as specified and directed.

S&F in repair 10ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK or equivalent make specified in tender.

S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: CON-021KN / Ess Ess, Cat No: C-201B / PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN or equivalent make specified in tender.

S&F in repair Vitreous China table top Wash Basin ( any shape ) 565 x 425 mm in size, White with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : JAQUAR, Cat No: KUS-WHT-35935 / CERA, Model: CHEST / HINDWARE, Cat No. 91069 or equivalent model in PARRYWARE or equivalent make specified in tender

S&F in repairs Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe incl providing 32mm bore PVC discharge pipe complete all as specified and directed.

S&F 15mm bore in repair Brass CP bib cock with crutch or butterfly handle chromium plated complete in all respect as specified.(upto 12 storey High of building)

S & F in repairs 15 mm Dia CP stop cock/ angle cock(concealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.. (upto 12 storey High of building)

S & F in repairs 15 mm Dia CP angular cock/two way angle cock , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.. (upto 12 storey High of building)

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed..(upto 12 storey High of building)

S&F in repair brass CP Shower roses in repair with or without swivel joints, 125mm size, including fixing to steel pipes or union complete all as specified and as directed..(upto 12 storey High of building)

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete in all respect as specified. (upto 12 storey High of building)

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed..

S&F corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A) or equivalent make specified in tender.

M&L for in repair Cast iron floor trap100 mm dia out let , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (upto 04 storey high building)

S&F in repair for Bottle trap 300 mm including all fittings all as specified and directed. Make Cera Cat No: F8060406, or equivalent make specified in tender.

M&L preparing new wooden surfaces of any description not otherwise described over 10 Cm width or girth and applying two Coat of Synthetic Enamel Paint over one coat of primer complete all as specified and as directed.

Taking up GI water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.

S&F for 15mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 32 here-in-before but 20 mm bore.

S&F for 20mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour for complete removal of existing treatment applying two coats of distemper oil emulsion white or tinted on plastered surfaces of wall including preparation of surfaces all as specified and directed.

M&L for preparation of new surface applying two coats of OBD over one coat of primer all as specified and directed.

M/L preparation old surface and applying three coats of white wash on wall complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised Powder coated for doors, windows, ventilators and partition with one or more rebate (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Notes: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be measured separately.

S&F for Anodised aluminium powder coating 50mm micron window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S&F 4.8mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed. (upto 04 storey high building)

S&F for 5mm thick of Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed..

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Demolition of brick work / stone masonry built in cement mortar and removing the debris from premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

Surface excavation on soft and loose soil n.exc (not exceeding) 30 cm deep and averaging 20 cm deep and getting out

Excavating in post holes(OR similar holes) each n'exc 0.50 cum , getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm as directed.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as directed.

M&L providing 50 mm thick bed of plain cement concrete of type B2 1:2:4 (40 mm aggregate) for laying of tiles on screed bed complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete as specified.

M&L non skid ceramic colour tiles/dark colour of area of each tile exc .18 Sqm but n exc exc .38 Sqm and 8-10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed.

Supply and fix non skid ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

M& L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in foundation filling and mass concrete in column & wall foundation, complete all as specified and directed.

M&L for brick work with fly ash brick straight or cuved on plan exc 6.0 mtr mean radius, built in 1:6 cement mortar complete all as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410 -W (Gde- E- 250) quality-A all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick, etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:4, finished fair & even & smooth without using extra cement, all as specified and directed.

Material & labour for preparing new surface exterior emulsion paint surfaces of walls by rubbing surfaces and applying two coat of exterior emulsion paint weather coat over one coat of primer , complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface on external surfaces in CM (1:4) & water proofing compound mixed with second layer @ 250 ml/Bag or as per manufacturer instruction finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separately . )

Supply only integral water proofing compound all as specified and as directed.

M&L rendering 10 mm thick in CM 1:3 on ceilings finished even and smooth without using extra cement (up to ceiling height of 6 to 7m )incl necessary arrangements for execution of the work) all as specified and directed.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed by Engr-in-charge.

M&L for preparation of new wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed .

M&L Verified ceramic joint free colour tiles area of each tile exc 0.42 Sqm but n exc exc 1.0 Sqm and 9 to 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed.

M&L Verified ceramic joint free colour tiles for Vertical surface of area of each tile exc 0.42 Sqm but n exc exc 1.0 Sqm and 9 to 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 10 mm thick screed bed cement mortar 1:3 complete all as specified and directed. all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed.

Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) and one flyscreen sash with frame dimension of 137.5 mm x 49mm and sash dimension of 61mm x 47mm x 37 mm and flyscreen sash dimension of 32mm x 58mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years.

The profiles should conform to BSI Quality Management System ISO 9001Supplying and installing uPVC- Sliding windows/ doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) with frame dimension of 104mm x 49mm and sash dimension of 61mm x 47mm x 37mm each with middle sash fixed with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery in Ist quality (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted. Make Kommerling or equivalent in other makes.

S & F 5.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed.

M&L for preparation of surfaces and pasting of wall paper of any design/pattern/shade complete all as specified and directed.

M&L for 4mm thick water proof and termite proof charcoal wall panel pasted on 5.5 mm thick WPC white board with adhesive screwed to the wall etc complete, all as per manufacturer instruction, all as specified and directed.

M & L for colour Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as specified and directed.

S&F double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel covergovering parrot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F 5.5 mm thick toughened frosted / coloured tinted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door, partition, windows, ventilator, automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed .

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF or equivalent make specified in tender.

(E/M PORTION) Supply and install split units indoor/outdoor complete with cordless remote control with minimum 5 star rating inverter type of capacity 1.5TR , copper condenser coil including 4 sqmm 4 core flex cable connection from indoor to outdoor unit as per site requirement including necessary masonry work for making good distributed surface and match with the existing colour complete all as specified and directed.

Supply and draw submain wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, un sheathed conductor in PVC Conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed.

Supply and laying refrigerant line copper tubing of size 5/8 " with clamping on wall surface or concealed with both the ends connection complete all as specified and directed.

All as per item ser No 88 here - in - before but of size 1/4 "

All as per item Ser No 88 here - in - before but of size 3/8 "

S & F foam insulation for copper tubing dia 5/8'' and 1/4'' complete all as specified and directed.

S & F drain pipe 5/8" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and directed.

Supply and fixing angle iron brackets bracings, supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats of suitable size etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F Socket for AC short circuit protection motor starter with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator complete all as specified and directed. Make: Cat No. ACPU6M-BT, or equivalent make specified in tender.

S&F in repair PVC cable tray of size 100 X 100 mm, 16 gauge thickness with all accessories such as clamps, screws etc complete all as specified and directed.

S&F in repair PVC Flexible pipe of size 100 mm, dia of appropriate thickness with all accessories such as clamps, screws etc complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated stranded copper conductor single core including PVC conduit of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with modular boxes, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exhaust fan/ bell point controlled by one switch. Note:- 1. Cost of PVC conduit, steel terminal boxes are deemed to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; shall be deemed to be included in the rate quoted above.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed..

S & F Modular type White cover plate with frame 3 module complete all as specified and directed..

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making hole as per site including making good disturbed surfaces fixing with fastnuts , properly clamped louvers complete all as specified and directed.

Supply , installation and commissioning of 3 phase 415 Volts ,Air Cooled Vertical type Air conditioner energy efficient with minimum 3 star rating indoor and Outdoor Complete with Cordless remote control unit , Scroll compressor of Capacity 3.0TR complete all as specified and directed.

Supply and draw submain wiring with four single core 10 sq mm FRLS PVC insulated copper cable 1100 volts grade multi stranded, un sheathed conductor in PVC Casing Capping and 10 sq mm multi-strand FRLS PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed.

S&F Nitrile Rubber insulation for copper tubing of size 5/8'' dia duly wrapped complete all as specified and directed.

S&F Nitrile Rubber insulation for copper tubing of size 3/8'' dia duly wrapped complete all as specified and directed.

M&L for sheet metal enclosure for DBs SPN 4 way 240 V, with 200 A rated bus bar double door, complete flush mounted all as specified and as directed

M&L for MCB Four Pole 240 volts 40 Amp capacity C Curve Complete all as specified and directed. Make : Cat No. 408700 of Legrand or equivalent make specified in tender.

Supply and fixing copper cable 6.0 sqmm 4 core duly connected and properly clamped from indoor unit to Outdoor unit complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

DGR CONSTRUCTION (BID ID -3378010)

MODERN AGENCY (BID ID -3375624)

M/S SRINIVASA CONSTRUCTION (BID ID -3375534)

KWALITY CONSTRUCTION (BID ID -3376752)

EAST COAST STANDARD PRODUCTS (BID ID -3379013)

HYDROTEC (BID ID -3375582)

Prahalad Rai (BID ID -3379121)

SANTOSH INTERNATIONAL (BID ID -3375198)