PM/RMM/e-Tender/CIVIL/25-26/20 (Sl.No.04) Dated.21.01.2026

Round the clock maintenance of water supply system of all tools and plants as required for back washing and rinsing of pressure clarifier and dosing of alum, soda ash and sodium hypochlorite and testing water periodically including cost of testing chemicals but excluding the cost of alum, soda ash and sodium hypochlorite for dovan water treatment plants of Rammam HP, St.-II (Analysed Rate)

Operation of pump (Analysed Rate)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. V/p-1,I-2 (a) of PWD SOR(Bldg)

Labour for laying 150 mm to 200 mm boulder soling including rough dressing, hand packing and ramming down small pieces in the interstics excluding rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (Analysed)

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.(b) above 150 mm. thick V/P-10, I-2 PWD S.O.R(bldg.)

Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site(a) In Road and Jhora Work. V/P-9, Sl.no.25 3rd corrigenda PWD S.O.R (bldg.)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. b)River bazree V/P-13, Sl.no.33 PWD S.O.R (bldg.), 3rd corrigenda

Ordinary cement concrete ( 1:2:4) with graded stone chips ( 20 mm nominal size) excluding shuttering of reinforcement, if any, in ground floor as per relevant IS codes. b)River bazree V/P-10, Sl.no.27 PWD S.O.R (bldg.), 3rd corrigenda

Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety.In ground floor.(a) 1:3:6 proportion V/P-18, Sl.no.45 PWD S.O.R (bldg.), 3rd corrigenda

Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any. ii) (1:3:6) proportion V/P-13, I-34 PWD S.O.R(bldg.), 3rdcorrigenda

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging is not required. V/P-332, I-18.05 PWD S.O.R (Roads)

Providing weep holes in Brick masonry / Plain /Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.

Supply Mazdoor (The minimum Labour wages as per Office order of the Labour Commssioner, W.B)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II.Other than SAIL/ TATA/RINL 10th Corrigenda, Sl. 1 PWD SOR (Building)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster V/P-189, I-1 (ii) (a) PWD S.O.R (bldg.), 3rd corrigenda

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. V/P-192, I-15PWD S.O.R (bldg.)

Labour for Chipping of concrete surface before taking up Plastering work. V/P-192, I-1, PWD S.O.R (bldg.)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (A) For Exposed Work. (a) (ii) 15 mm dia. medium quality. V/p-2, I-1 PWD S.O.R (Sanitary & Plumbing)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (A) For Exposed Work. (b) (ii) 20 mm dia. medium quality. V/p-2, I-1 PWD S.O.R (Sanitary & Plumbing)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (A) For Exposed Work. (c) (ii) 25 mm dia. medium quality. V/p-2, I-1 PWD S.O.R (Sanitary & Plumbing)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (A) For Exposed Work. (e) (ii) 40 mm dia. medium quality. V/p-2, I-1 PWD S.O.R (Sanitary & Plumbing)

Supply of galvanised iron socket with I.S.I. mark. (i) 15 mm dia

Supply of galvanised iron socket with I.S.I. mark. (ii) 20 mm dia.

Supply of galvanised iron socket with I.S.I. mark. iii) 25 mm dia.

Supply of G.I. reducing socket with I.S.I. mark. (i) 20 mm

Supply of G.I. reducing socket with I.S.I. mark. (ii) 25 mm

Supply of G.I. bend. (i) 15 mm

Supply of G.I. bend. (ii) 20 mm

Supply of G.I. bend. (iii) 25 mm

Supply of G.I. plain equal elbow of approved brand and make. (i) 15 mm

Supply of G.I. plain equal elbow of approved brand and make. (ii) 20 mm

Supply of G.I. plain equal elbow of approved brand and make. (iii) 25 mm

Supply of G.I. plain tee of approved brand and make (i) 15 mm

Supply of G.I. plain tee of approved brand and make (ii) 20 mm

Supply of G.I. plain tee of approved brand and make (iii) 25 mm

Supply of G.I. nipple standard 50 mm long. (i) 15 mm

Supply of G.I. nipple standard 50 mm long. (ii) 20 mm

Supply of G.I. nipple standard 50 mm long. (iii) 25 mm

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut. (i) 15 mm

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut. (ii) 20 mm

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut. (iii) 25 mm

Supply of G.I. union. (i) 15 mm

Supply of G.I. union. (ii) 20 mm

Supply of G.I. union. (iii) 25 mm

Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) (i) 15 mm

Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) (ii) 20 mm

Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) (iii) 25 mm

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (iv) 50 mm dia V/p-5, I-5 PWD S.O.R (Sanitary & Plumbing)

Non schedule Item (Rate should be analysed from present market rates of different element in the item against documentary evidence with 5% overhead charge 10% contractors profit & 1% BOCWW Cess towards BOCWW Act 1996. In that case contractual rate will not be applicable

Items covering based on P.W. D ., S.O.R ( Bldg w.e.f 01.11.2017 (15th corrigenda 07.09.2022) & Roads & Bridges w.e.f 30.08.2018 (12th corrigenda 29.07.2025) and S&P w.e.f. 01.11.2017 (7th corrigenda dtd. 22.01.2020)

Add BOCW cess @1% on the rate of all above items

Please Enable Macros to View BoQ information