GE U(N) 41 2023 24 WELCOME MAINT INCLUDING CERTAIN MISC REPAIR ETC AND E M WORKS AT ZONE ONE PB ENCLAVE CHINAR COMPLEX UNDER GE (N) UDHAMPUR

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articlescomplete all as specified and directed by Engr in Charge

Taking down chowkats or frames with shutters(without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr in Charge

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr in Charge

Taking down shutter of any description exc 1 Sq.m and n/exc 2 Sq.m eachcomplete all as specified and directed by Engr in Charge

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engr in Charge

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed by Engr in Charge

Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed by Engr in Charge

Dismantling water tanks of 1000 ltrs and removing to store,complete all as specified and directed by Engr in Charge

Dismantling water tanks of 500 ltrs and removing to store,complete all as specified and directed by Engr in Charge

Dismantling floor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge

Demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr in Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr in Charge

Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed by Engr in Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr in Charge

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4complete all as specified and directed by Engr in Charge

Brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr in Charge

Rendering 15mm thick in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work or concrete surfaces, in cm 1:4 finished even and smooth w/o using extra cement complete all as specified and directed by Engr in Charge

Rendering 10mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement,complete all as specified and directed by Engr in Charge

Rendering 5 mm thick plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge

Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed by Engr in Charge

Glazed ceramic coloured tiles 450mm x300mm x 6 to 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr in Charge

All as per Serial Item no 21 above here-in-before but in renewing tiles in patches, area n exc 5 sq.m. including removing old tiles, preparing new plastered surface as in CM 1:4, jointing, pointing & providing new tiles,complete all as specified and directed by Engr in Charge

M&L for opening existing wall & Floor joints and filling/ Seal with Silicon sealent ( at Vertical & Horizontal Joints), complete all as directed by Engr-in-charge.

Granite work with 16mm thick slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and directed by Engr in Charge

50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and directed by Engr in Charge

25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed by Engr in Charge

Reinforced cement concrete, 1:11/2:3, type A-1 (using 20 mm graded stone aggregate) design mix as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed by Engr in Charge

Form work to edges of concrete flats, treads, breaks in floors, window cills, floor and roof slabs and shelves, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide complete all as specified and directed by Engr in Charge

Form work to soffits of suspended slabs such as floor slab,landings and similar work not exc 200mm thick in Rough finish surfaces of concrete complete all as specified and directed by Engr in Charge

Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr in Charge

Sheet glass 3mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and directed by Engr in Charge

4mm thick figured glass pin head type ordinary quality and size and in any type of frame and glazing with oil putty(or beading) in square n.exc 0.5 sq.m in each panes complete all as specified and directed by Engr in Charge

Making good steel windows section by taking down and refixing including cutting/welding if required and made good to smooth fuctioning including replace of minor fittings (Hinges, Handle) of the window,complete all as specified and directed by Engr in Charge

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed by Engr in Charge Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 2. The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/Engr-in-charge .If he fails to complete the work with in same day then recovery will be made @150.00 per complaint per day complete all as specified and directed by Engr in Charge

5mm thick printed colour PVC sheet as in aluminium doors/ partitions fixing wirh rubber neoprene packing and powder coated aluminium beading, complete all as specified and as directed by Engr-in-Charge.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, cleats, etc to make door or window fully functional complete all as directed by Engr-in- Charge.

S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwsas in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed by Engr in Charge

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc, complete all as specified and directed by Engr in Charge

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed by Engr in Charge

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed by Engr in Charge

S&F in repair Stainless steel luddle-craddle hanging stand for cutlery all as specified and directed by Engr in Charge. for modular kitchen, complete all as specified and directed by Engr in Charge

Fixing only existing stainless steel multipurpose brackets in wooden/drawer/partitions for storing rations of various type, complete all as specified and directed by Engr in Charge

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed by Engr in Charge

Factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and directed by Engr in Charge

Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as directed by Engr-in-charge.

Pressed steel frame 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as directed by Engr-in-charge.

35mm thick factory made flush shutters, solid core constructions, with block board, core and plywood face panel, commercial plywood on both sides, complete all as specified and directed by Engr in Charge

35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.24 (a), complete all as specified and directed by Engr in Charge

S&F 100 mm long stainless steel butt hinges, medium weight, complete all as specified and directed by Engr in Charge

S&F 150 mm long aluminium handles, cast type, anodised ,complete all as specified and directed by Engr in Charge

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr in Charge

All as per description of Ser item No. 52 above but 125 mm Size, complete all as specified and directed by Engr in Charge

S&F aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr in Charge

S&F 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and directed by Engr in Charge

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed by Engr in Charge

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and directed by Engr in Charge

S&F in repairs aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr in Charge

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by Engr in Charge

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed by Engr in Charge

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding, complete all as specified and directed by Engr in Charge

S&F in repair floor door stopper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed by Engr in Charge

S&F in repairs mild steel cold rolled butt hinges medium weight 50 mm long fixed to pressed steel/angle iron frames by welding, complete all as specified and directed by Engr in Charge

S&F in repairs continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open, complete all as specified and directed by Engr in Charge

S&F in repairs 40 mm dia cup board knobs, brass polished, fixed with nut, screws and washer of mild steel, complete all as specified and directed by Engr in Charge

S&F in repairs mild steel powder coated or chromium plated peg sets of six pegs of standard quality as approved by Engr-in- charge and fixed etc, complete all as specified and directed by Engr in Charge

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed by Engr in Charge

S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr in Charge

S&F in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc, complete all as specified and directed by Engr in Charge

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or welded to steel frames with welding/fitted with screws etc, complete all as specified and directed by Engr in Charge

S&F in repairs magic eye to main doors including necessary fixing arrangements etc, complete all as specified and directed by Engr in Charge

S& F in repairs fancy type MS curtain rods powder coated 25 mm dia with end fittings and fixing brackets of required size ( two nos end brackets and two Nos wall brackets fixed with wooden gutties and screws, complete all as specified and directed by Engr in Charge

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and directed by Engr in Charge

S&F Aluminum door seal in repairs with PVC bush of adjustable type(Overall width 25mm) of approved Quality, fixed to door shutter, complete all as specified and directed by Engr in Charge

Vitreous china wash down water closet (pedestal pattern), suitable for P or S trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and directed by Engr in Charge

Plastic water closet seat, closet pattern with flat button and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

Vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as per specified. (Fixed in Repair)

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc., fixed in repairs,complete all as specified and directed by Engr in Charge

Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified.

S&F flush pipe in repairs of pvc 32mm dia for low cistern pipes,complete all as specified and directed by Engr in Charge

S&F for waste pipe of dia 32mm for WHB/Sink,complete all as specified and directed by Engr in Charge

S&F for waste pipe of dia 40mm for WHB/Sink,complete all as specified and directed by Engr in Charge

S&F in repairs 32mm bore dia of CP brass waste coupling suitable for WHB,complete all as specified and directed by Engr in Charge

S&F in repairs 40 mm bore dia of CP brass waste coupling suitable for Kitchen sinkcomplete all as specified and directed by Engr in Charge

S&F in repairs syphon kit assembly for low level flushing cistern including flush handle, float valve etc, complete all as specified and as directed

S&F in repairs flushing handle suitable for PVC flushing cistern of 10 ltr capcitycomplete all as specified and directed by Engr in Charge

S&F in repairs 15mm PVC float valve suitable for PVC flushing cistern of 10 ltr capcitycomplete all as specified and directed by Engr in Charge

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm bore (minimum weight 142 gms ) including fixing of socket if required and taking out old UNSV existing ball valves,complete all as specified and directed by Engr in Charge

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm bore including fixing of socket if required and taking out old UNSV existing ball valves,complete all as specified and directed by Engr in Charge

S & F in repairs for spindle suitable for 15mm bore CP taps/ mixers, complete all as specified and directed by Engr in Charge

CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineer-in-Charge.

20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and directed by Engr in Charge

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and directed by Engr in Charge

Corner Glass self ( With CP brakets), as in repairs complete all as specified and directed by Engr in Charge

Single lever wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed by Engr in Charge

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed by Engr in Charge

Hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed by Engr in Charge

Shower rose, brass, chromium plated, 100 x 100mm Square with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed by Engr in Charge

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed by Engr in Charge

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed by Engr in Charge

Health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed by Engr in Charge

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed I repaircomplete all as specified and directed by Engr in Charge

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washerscomplete all as specified and directed by Engr in Charge

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washerscomplete all as specified and directed by Engr in Charge

Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed complete all as directed by Engr-in-charge.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed by Engr in Charge

CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and directed by Engr in Charge

CP brass grating 100mm dia, fixed in repair complete all as specified and directed by Engr in Charge

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screwcomplete all as specified and directed by Engr in Charge

Sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed by Engr in Charge

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratary with lugs, washers and wastes: including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantiliver brackets and connecting upon to pipe overall size 915mm x 460mm bowl size 410mm 330mm x 160mm, fiexed in repaircomplete all as specified and directed by Engr in Charge

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with' long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs,complete all as specified and directed by Engr in Charge

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed by Engr in Charge(fixed in repair)

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed by Engr in Charge(fixed in repair)

Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed by Engr in Charge

Cleaning of 1000ltr capacity water tank including removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and writing the date of cleaning on the tank with white /black paint,complete all as specified and directed by Engr in Charge

Cleaning of 500ltr capacity water tank including removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and writing the date of cleaning on the tank with white /black paint, complete all as specified and directed by Engr in Charge

15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr in Charge

All as per Serial Item no 120 above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).

Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr in Charge

All as per Serial Item no 122 above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed by Engr in Charge

Preparation of old decorated plastered surfaces and applying one coat of white wash on walls, complete all as specified and directed by Engr in Charge

Preparation of old decorated plastered surfaces and applying one coat of white wash on ceiling, complete all as specified and directed by Engr in Charge

Preparation surfaces plastered or unplastered new surfaces and washing, rubbing down and Stopping of distempered and painted surfaces, complete removal of existing treatment and applying two coat of white wash on ceiling, complete all as specified and directed by Engr in Charge

Complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss & efflorences salts and trading oil & greasy spots,removing all mud,cake with steel wire brush and gunny bags from old plastered surfaces and applying two coats of distemper oil emulsion white or tinted over one coat of 1 to 1.20mm thick wall care putty over a coat of alkali resistance priming paint, complete all as specified and directed by Engr in Charge

Preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed by Engr in Charge

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed by Engr in Charge

Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coat of cement base paint on walls, complete all as specified and directed by Engr in Charge

Complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed by Engr in Charge

Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed by Engr in Charge

Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed by Engr in Charge

Preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed by Engr in Charge

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr in Charge

Preparation of old painted steel and iron surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed by Engr in Charge

Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by Engr in Charge.

Taking down Old Serviceable/unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by Engr in Charge.

M&L for Point wiring for One light point controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia and1.5mm wall thickness ISI marked terminated into annealed steel terminal boxes including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI meraked drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan in to and including suraface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continious earth wire connected to common earth dolly complete all as specified and directed by Engr in Charge.

All as per item No. 141 above but for bell / buzzer on independent board controlled by one push button bell switch.

All as per item Srl No. 141 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item No. 141 above but for one 5 Amps socket outlet on independent board.

All as per item No.141 bove but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.

All as per item No. 141 above but controle by 2 Nos.of two way switch.

M&L Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping /PVC conduit with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan/controlled by one switch with thickness not less than 1.25mm annealed steel boxes concealed on wall with and including 3mm thick laminated backlite sheet complete all as directed by Engineer-in-charge.

All as per item No 148 above but for two way point wiring

All as per item No 148 above but for one 3/5 pin socket 5 Amp on same board.with cable1.5 sqmm size.

All as per item No 148 above but for one 3/5 pin socket 5 Amp on independent board.with cable1.5 sqmm size.

All as per item No 148 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.

All as per item No. 148 above but for bell / buzzer on independent board controlled by one push button bell switch.

S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge.

S&F Switch Piano flush type single pole two way 5/15 Amps, all as specified and directed by Engineer- in - Charge.

S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge.

S&F Switch Piano type single pole 16/20 Amps One way, complete all as specified and directed by Engineer- in - Charge.

S&F Socket outlet Two in one, 3/5 Pin piano type 10 Amp and 20 Amp flush type complete all as specified and directed by Engineer- in - Charge.

S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge.

S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by Engr in Charge.

S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge.

S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge.

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by Engr in Charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item No 166 complete all as specified and directed by Engineer- in - Charge.

Sub main wiring with two run single core 4 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 4 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 4 sqmm and one run 4 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 6 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 6 sqmm and one run 6 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 1.5 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia in PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 1.5 sqmm and one run1.5 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 2.5 sqmm FRLS copper conductor cable PVC insulated, 1100V grade including 25mm dia in PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 2.5 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 2.5 sqmm and one run2.5 sqmm cable and one run of PVC casing and caping shall be measured as one RM

Fixing only serviceable MCB DB of any type and capacity obtained from Srl Item No 140 complete all as specified and directed by Engr in Charge.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 4 Way all as specified and directed by Engr in Charge.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 8 Way all as specified and directed by Engr in Charge.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 12 Way all as specified and directed by Engr in Charge.

Supply and fix VTPN MCCB Double door Distribution Board 04 way 415 volts grade IP 43 Protection Grade with provision for (MCCB) as incomming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.

S & F in repair Thermal magnetic MCCB 4 pole 63 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr in Charge. for MCCB DB.

S & F in repair Thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr in Charge. for MCCB DB.

S & F in repair Thermal magnetic MCCB 4 pole 125/160 Amps 415 Volts 16ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr in Charge. for MCCB DB

S&F in repair connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domesitc loads incl necessary copper lugs etc all as specified and as directed by Engr in Charge.

S&F in repair 'C' series MCB SP 6-32 Amps all as specified and as directed by Engr in Charge.

S&F in repair 'C' series MCB SP 40 Amps all as specified and as directed by Engr in Charge.

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 140 as above all as specified and as directed by Engr in Charge.

Fixing only LED tube light fittings of 5w/12W/20W/2'x2' panel light anf LED bulk head fitting 9W as obtained from Srl item No 141 above all as specified and as directed by Engr in Charge.

S&F in repair LED light fitting with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr in Charge.

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 /12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr in Charge.

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr in Charge.

S&F in repair LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by Engr in Charge.

S&F in repair surface/recessed mounting LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr in Charge.

S&F City 3 decorative wall light fizture made up of polycarbonate suitable for 15 watt retrofit CFL/LED (B-22 base) complete all as specified and as directed by Engr in Charge.

S&F in repair surface/recessed mounting LED warm light fitting POLARIS PAN NIO-III,PANEL 2'x2' PLR 36 FO-ww ,35/36 watt LED environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as spesified and directed by Engr-in-charge

S&F in repair surface/recessed mounting LED down lighter round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as spesified and directed by Engr-in-charge .Make -Crompton & Greaves,Model Pearl -R or Proxima-S CAt Pt No-CDR-208-12-30SL-NWH,Havell & WIPRO

S&F in repair surface/recessed mounting LED down lighter round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as spesified and directed by Engr-in-charge Engr-in-Charge.Make -Crompton & Greaves,Model Pearl -R or Proxima-S CAt Pt No-CDR-208-15-30SL-NWH,Havell & WIPRO

S&F in repair for MCB TPN 63 Amp, 415 Volts- C curve of 10KA complete all as specified and as directed by Engr in Charge.

S&F in repair Metal clad Plug socket single pole enclosure with two pin earth plug and socket with one single 20 Amp , 240 volts MCB complete all as specified and directed by Engr in Charge.

S&F in repairr Switch Piano flush type single pole two way 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch Piano flush type single pole 5 Amps one way fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair switch piano flush type for bell Push 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp and 15 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch Piano type single pole 16/20 Amps One way, fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch socket combination box type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Switch socket combination box type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body fixed in replacement, complete all as specified and directed by Engineer - in - Charge.

S&F in repair Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F in repair Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by Engr in Charge.

S&F in repair Modular fan step regulator 120W 02 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair Modular switch 01 way 06A, 01 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair Modular switch 01 way 16A, 01 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair Modular bell push flush type 6A, 01 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair Modular socket, 6A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by Engr in Charge.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 200x150x50mm deep including making necessary cutting all as specified and as directed by Engr in Charge.,

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 250x200x50mm deep including making necessary cutting all as specified and as directed by Engr in Charge.,

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engr in Charge.

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 250x200mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engr in Charge.

M&L for disconnecting all Electrical connection from MCB DB TPN/Wall Mounted Panel Box for reconnecting the same with providing proper Copper Bottle Lugs of suitable size and removing the burnt out internal wiring of DB/Panel complete with providing PVC Flexible conduit for Hanging wire complete all as specified and directed by Engr in Charge. Note : Replacement Burnt out MCBs of any type/size may be measured and paidseparately under relavent Items

Taking down/removing existing damaged cable connection from MCB DB/Wall Mounted Panel Board by making cutting chases on wall/ floor to extend the shorten UG cable of any type/size from Loop and making fresh to reconnect the same with suitable aluminium lugs complete including distribute the load equally on each phase all as specified and directed by Engr in Charge. Note : Cutting of Wall /Floor shall be measured and paid separately.

M&L for Cutting of hard standing n.exc 45 Cm defth, and n.exc 30 Cm width for taking out/laying UG Cable including making good disturbed surface as per existing all as directed .

M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (e) Requisite quantity of common salt and charcoal. (f) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the Engr in Charge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

Suplly and fix in repair energy saving LED garden light fitting,decorative,bollard type of capacity 9/11 watt with opaldiffuser &aluminium reflector complete with all accessaries and fixing arrengement on PCC block of size 45mm X 45 mm alogwith fixing nuts,bolts and PVC insulated aluminiumconductor,stranded type of size 4.0 sqmm,2 -core including taking down old/unserviceble garden light fittings any type and wattage all as directed. Make - C&S cat pt No- LTGLCW9WLED,Havells cat pt No- LHEVBDP7IN6K008,Crompton & Greaves-LPTO-40-CDL-M

Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply & fix in repair driver/ choke suitable for LED panel light fitting 2'x2' 36 watts, 240 volts AC 50 Hz electronic type complete all as specified and as directed by Engr in Charge.

Supply & fix in repair LED street/buiding ligh fitting driver/ chokesuitable for 25/35 watts, 240 volts AC 50 Hz electronic type complete all as specified and as directed by Engr in Charge.

Supply and fix in repair decorative LED gate light fitting of 30/40 watt,240 volts,diecast aluminium housing in pure polyster powder coated grey finish,top maintainable product with opening die cast cover,anti corrossive stainless steel screws & silicon gasket,HET PMMA diffuser,IP65 protection driver duly prewired up to terminal on firms to IS 10322 part 5/sec, 1 :1987,suitable for pole of dia 65-75 mm in-built electronic driver complete including taking down old/unserviceble gate light fitting complete all as specified and directed .Make - Crompton & Greaves Cat part No -LPT0-40-CDL or equivalent in Bajaj/Havells/C&S/ Philips/Wipro

s l sharma and sons

anil construction co.

MAHAJAN TRADING CO

DEV RAJ MAGOTRA

SATYA SALES AND BUILDERS

TULSI RAINA AND SONS

KALSOTRA CONSTRUCTION CO