REPAIRS TO JOINERY FLOORING AND ALLIED WORKS IN CERTAIN OFFRS MD ACCN AT SI LINES UNDER GE BHOPAL

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 2 Sqm each complete all as specified and directed

Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

Demolition of Brick or stone massonry work built in cement or cement lime mortar complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs, cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for Chequered paver tiles reflective/glossy type, any colour as decided by GE, size- 300mm x 300mm x 20 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, etc with & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Stone slab 25 mm to 35 mm tick dressed true and square, in one length not less than 60 cm and not exc 120 cm in copings, window cills, chajjas, sunshades, etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed., set, jointed and pointed in cement mortar complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed. Note:- All exposed edges of kota stone flooring shall be finished as half round/bull nosed and white marble strip border of width not less than 100mm shall be provided to the pattern & design as approved by GE.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, etc with and including 10mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES or any ISI marked as approved by GE]

M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES or any ISI marked as approved by GE]

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 25 mm thick Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in sub base of floors, etc complete all as specified and directed.

M&L for vitrified light shade flooring tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON as approved by GE]

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON as approved by GE]

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON as approved by GE]

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON as approved by GE]

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 300mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON as approved by GE]

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking/wash basin platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT as approved by GE]

Supplying & fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO as approved by GE]

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality and glazing to aluminium door, window & partition including pad/gasket, area exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

M&L for factory made Second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Flush shutters 40mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. [MAKE:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL as approved by GE.]

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. [MAKE:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL as approved by GE.]

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 100 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F in repairs decorative mild steel chromium plated, 19mm dia, minimum thickness 1mm, curtain rod with side fixing brackets, rings & decorative knobs complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

Providing and fixing 10 to12mm Gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coat of oil bound distemper, complete all as specified and direcetd.

M&L for galvanised cold rolled steel section framework of size 600 x 600mm grid size using 24x38x0.50 (composite thickness) tee (bottom pre coated) & 24x24x0.50mm (composite thickness) wall angle including suspenders as per manufacturer’s instructions complete all as specified and directed. [Make: GAPSON(Gabsec) or equivalent as approved by GE]

S&F asbestos free calcium silicate board of size 600x600x6mm, fixed to steel frame work in ceiling with & including applying two coats of oil bound distemper complete all as specified & directed. NOTE:- Cost of making frame work for light fittings, etc is deemed to be included in the quoted unit rate

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH as approved by GE.]

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH as approved by GE.]

S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE as approved by GE.]

S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 OR 120404), PRAYAG (Cat No.4016/4017) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

S&F in repairs Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110107) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F in repairs Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.1218D Gloss) or equivalent in NIRALI/BLUE STAR as approved by GE]

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8328) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Bib tap long body with flange, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.7208) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approved by GE]

Fixing only in repairs mixing valve cast copper alloy including 3 joints to steel pipes or for unions 15mm bore & plugging and screwing to walls complete all as specified and directed.

S&F in repairs wash basin mixture, centre hole, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated screwed for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8250) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F in repairs hand shower (health faucet) with 8mm dia 1.0 mter long flexible tube and wall hook complete all as specified and directed. [MAKE:- Prayag (Cat No.BH-76) or equivalent in JAQUAR/MARC as approved by GE]

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs Plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, fixed in repairs complete all as specified and directed. [MAKE:- Prayag / POLYTUFF /PARRYWARE as approved by GE]

S&F in repairs tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE]

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash complete all as specified and directed.

M&L for applying 3mm thick wall care putty complete all as specified and directed. [Make: Birla Cement /JK White]

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in unframed work in any position complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL as approved by GE]

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in ridges, etc, fixed with & including self tapping screws complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL as approved by GE]

S&F Asbestos cement 6mm thick, corrugated or semi corrugated sheets in roofs, walls etc, fixed with L or J type or cranked hook bolts complete all as specified and directed.

Fixing only Asbestos cement 6mm thick, corrugated or semi corrugated sheets in roofs, walls etc, fixed with new L or J type or cranked hook bolts complete all as specified and directed. NOTE:-Old serviceable sheets obtained from dismantling shall be reused.

S&F Asbestos cement 6mm thick two piece serrated ridge for corrugated or semi corrugated sheets, fixed with L or J type or cranked hook bolts complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting, 2mm thick, with two corrugation side lap fixed with L or J type or cranked hook bolts or with & including self tapping screws on angle frame in roof, wall etc complete all as specified and directed.

S&F Framed work of rolled mild steel conforming to Fe 410-W (Gde E-250) quality -A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing including taking down old steel/iron works complete all as specified and directed.

S&F Steel work in tubular/structural trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; handmade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed.

S&F PVC (SWR) pipes, double socketed, in any length with rubber ring joints, fixed to walls with suitable clamps, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, double socketed, in any length with rubber ring joints, fixed to walls with suitable clamps, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 50 cm long complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-45) or equivalent in JAGUAR/CERA as approve by GE]

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 300mm size complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-46) or equivalent in JAGUAR/CERA as approve by GE]

M&L for grinding & polishing on existing old marble/mossaic/terrazo/ kota stone surfaces including filling all existing joints with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and directed.

S&F in repairs overhead square shower (size-150mm x 150mm) with rubit cleaning system complete all as specified and directed. [MAKE: JAQUAR (Cat.No.OHS-35495) or equivalent in MARC/ PLUMBER as approved by GE]

S&F in repairs wall mixture with provision for bath telephone shower and overhead shower, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.7280) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F in repairs Bib cock, 2 way double handle with flange, cast copper alloy, chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.7212) or equivalent in JAGUAR/CERA as approve by GE]

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes including taking down old unserviceable tank of any type & capacity complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST as approved by GE]

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes including taking down old unserviceable tank of any type & capacity complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST as approved by GE]

Supplying & fixing 4 layered 12mm thick HDF core laminated wooden flooring fixed all as per manufacturers instruction complete all as specified and directed. [MAKE: ACTION TESA or equivalent as approved by GE]

M&L in repairs stainless steel hand rails, Grade 304 conforming to IS of approved design including ornamental fittings, globes and all necessary drilling, bolting, riveting, welding, etc fixed in floors, steps, etc complete all as specified and directed.

S&F in repairs stainless steel plate rack of minimum size 31”x36’x10” fixed with screws on wall complete all as specified and directed. [Make : PRAYAG (Model No P-348) or equivalent in NEELKAMAL/PARRYWARE as approved by GE.]

S&F in repairs stainless steel plate rack of minimum size 24”x30’x10” fixed with screws on wall complete all as specified and directed. [Make : PRAYAG (Model No P-330) or equivalent in NEELKAMAL/ PARRYWARE as approved by GE.]

S& F in repairs Vitreous china Wash basin white oval type size 520 mm x 450 mm including CP waste coupling 32 mm dia pvc waste pipe of suitable length brakets cutting and pinning in end of brackets complete all as specified and directed.

S&F Vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 OR 120404), PRAYAG (Cat No.4016/4017) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F in repairs towel rack 24" long with hanger, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed. [MAKE: PRAYAG (Cat.No.BA-42) or equivalent in MARC/ JAQUAR as approved by GE]

S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F in reapir 0.6 mm thick decorative laminate type 1, of surface finish, white color and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F in reapir CP sliding door lock (Item Code No SLDL-W1-NP) complete all as specified and directed. (Make-By Ebco Pvt Ltd or equivalent as approved by GE)

S&F in reapir aluminium sliding channel (three track) complete all as specified and directed.

S&F in reapir 40 mm dia cub board knobs, complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of ceilings and applying one coat of white wash, complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats distemper oil emulsion, white or tinted complete all as specified and directed. [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.]

M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed. MAKE : ASIAN (Apex ) or equivalent as approved by GE. Note :- Exterior Acrylic Emulsion Paint only, Should be carried out by any of approved Company /firm (Apex of M/S Asian Paint or Equivalent)

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and incl a coat white cement based putty, complete all as specified and directed. MAKE : ASIAN (Apex ) or equivalent as approved by GE. Note :- Exterior Acrylic Emulsion Paint only, Should be carried out by any of approved Company /firm (Apex of M/S Asian Paint or Equivalent)

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

M&L for Cabinet Hinges Soft Close stainless steel 8 Crank, complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 40,710.00

R.K trading bhopal

NDS TRADERS

PADAMSHRI CONSTRUCTION CO

POONAM ELECTRIC INDUSTRY

deepak mehra & associates

MS Soumya consultants and designers

M/S MEWALAL UPADHYAY