GEK- 77 OF 2026-27 COMPREHENSIVE B R AND E M MAINT IN MD ACCN AT MIL STATION DAGSHAI UNDER GE KASAULI

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified

Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in any position or slope upto 15 mtr of height including Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.

Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of approved colour having tensile strength of 550 Mpa as in ridges, valley gutters etc ,fixed with self tapping screws in any position or slope upto 15 mtr of height including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.

Supply and fixing for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed.

Supply and fixing 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs, walls etc. with grade of zink coating 275, complete all as specified and directed.

Supply and fixing 0.80 mm thick Plain, galvanized mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zink coating 275 complete all as specified and directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and directed.

Material and labour for 2nd class hardwood (Hollock) clean sawn in scantlings, in any position in unframed work, complete all as specified and directed

Supply and fixed in repair 40 mm thick boarding in Floors and Skirting Planed one side, with butt joints and fixed with nails complete all as specified and directed.

Supply and fixing of Powder coated aluminum three track sliding Glazed window with three shutters, Aluminum 03 shutters sliding, each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Window frame of cross section 101mm x 40mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x1.1 mm thick. (iii) Sliding shutter frame of cross section 40x18x1mm. (iv) Aluminium glazing strip of size 18.2x16.66mm. (v) 4mm thick float glass superior quality make Modi float for 2 Nos shutter. (vi) IDE rubber gasket for fixing glass. (vii) Locking cleat per shutter - 01 No (viii) Two nos sliding rollers per shutter (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm for one shutter. (xi) Fixing screws for frame with wall - 06 No per window (x) Anodised aluminium grill fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. Thickness of Powder coating shall not be less than 50micron.