REPAIR TO PERIMETER FENCING, PATH, HARDSTANDING, DRAINAGE ETC AT ZONE B OF AF STN SONEGAON, NAGPUR

Amount

Dismantling posts or struts (woods, steel or RCC) any section including taking out embedded portion in concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed by Engineer in charge.

Dismantling of chain link fencing wire mesh or barbed wire any type complete all as specified and directed by Engineer in charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. complete all as specified and directed by Engr-in-Charge.

M & L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining for terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and n exc 250 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer in Charge.

S & F in MS screw bolts of dia 11-15 mm (machine made) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt n exc 5cm long complete all as specified and directed by engineer in charge.

S & F in repair galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc complete all as specified and directed by Engineer in Charge. Note: - Each line of wire to be measured separately.

Restraining re-securing including making good staples etc of galvanised strand steel barbed wire of any type complete all as specified and directed by Engineer in charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete. Note: - Chain link fencing, nut bolts and line wires shall be measured separately.

Supply only mild steel galvanised Chain link fencing, not less than 3mm dia any size or type complete all as specified and directed by Engineer in Charge.

S & F 10 mm dia and over mild steel round bars in chain link fencing complete all as specified and directed by Engineer in Charge.

M & L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer in Charge.

M & L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer in Charge.

Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed.

Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid dry and laid dry and pointed and removing debris outside MD land complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade approved design & colour laid over 40mm thick layer of sand cushion complete all as specified and directed by Engineer-in-charge.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for chequered cement concrete tiles of size 30cm x30cm and 25mm thick jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4) complete all as specified and directed.

M & L for coloured parking tiles of size 30cm x30cm and 10-15 mm thick jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4) complete all as specified and directed.

Demolition of cement concrete in ground floor n. exc 15cm thickness (below or above ground level) and removing the demolished material and debris outside MD land complete all as specified and directed.

M & L for 75mm thick PCC (1:4:8) Type D2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M & L for 100mm thick PCC (1:2:4) Type B1 (using 20mm stone aggregate) as in floor finished even and fair complete all as specified and directed.

M & L for hard core of broken stone or boulder having gauge n exc 63mm, deposited, spread and levelled in layers’ n exc 15 cm thk, watered and rammed to a true surface, complete all as specified and as directed.

M & L for PCC (1:3:6) Type C1 (using 20mm graded stone aggregate) as in surface channel / drains complete all as specified and directed.

M & L for Plain cement concrete Type B1 1:2:4 using (20mm Graded stone aggregate) for coping complete all as specified and directed by Engineer in Charge.

Demolition of Brick work or stone/ boulder masonry built in Cement mortar and removing from site complete all as specified and directed by Engineer in Charge.

M & L for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engineer in charge.

Taking down cement plastering on brick walls/stone walls/ ceiling etc including racking out of joints hacking for key scrubbing down with water and disposal of rubbish to outside the MOD land complete all as specified and directed.

M & L for 15 mm thick cement plastering in CM (1:3) on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M & L for 15 mm thick cement plastering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M & L for preparation of newly plastered or un plastered surfaces and applying three coats of white wash complete all as specified and directed by Engineer in Charge.

M & L for preparation of newly plastered or un-plastered wall surfaces and applying two coats of cement paint over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and applying one coats of cement based paint complete all as specified and directed.

Taking down mild steel grill, grating, cover embedded in concrete and re-fixing in the same opening to match with existing level and surface complete including PCC 1:3:6 for fixing complete all as specified and directed.

Demolition of Reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Providing pre-cast reinforced cement concrete, 1:2:4 type B 1 as in cover slab for manholes, landing and similar articles set in cement mortar 1:6 complete all as specified and directed.

M & L for TMT steel bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for applying two coats synthetic enamel paint over a coat of primer on steel surfaces of any description n exc 10 Cm width or girth including preparation of surfaces complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Type Grade ‘B’ complete all as specified and directed.

Repair to MS iron gate including taking down and re-fixing in the same opening with required adjustment welding and greasing, repair to Pintle hinge (cutting in concrete and making good with appropriate material) including welding and providing/replacing heavy duty ball bearing of gate complete all as specified and directed.

karambir constructions (BID ID -3433674)

M/s M.G. Hargunani (BID ID -3434116)

M/s Shrangi Rishi Construction (BID ID -3433075)