REPAIR/MAINTENANCE OF JOINERIES IN SMQ AREA UNDER GE (AF) ADM AREA AT AF STATION GWALIOR

Amount

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each including iron mongery etc. complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each complete all as specified and all as directed.

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube including 75mm long MS screws for fixing to walls all as per specified in SSR complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section conforming to Fe-410-W(Gde-E-250) quality-A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M & L for providing cement concrete type C-0, 1:3:6 (12.5 mm graded stone) aggregate as in filling of pressed steel door frames/Holdfast complete all as specified and direcetd.

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

S & F 35 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F Butt hinges, medium weight Stainless steel 100 mm size complete all as specified and as directed

S&F extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm complete all as specified and as directed.

Supply and fix mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed

M&L two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on new steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed

S&F Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long complete all as specified and as directed

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed.

S & F in repair 18mm thick UPVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides, top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.

All as per ser Item No 23 here-in-before but one side prelaminated type

All as per item No 23 here-in-before but 12mm thick both side plain type

S & F continuous (Piono) hinges ,stainless steel bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F stainless steel handles of 150 mm size for Cup board complete all as specified.

S&F stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement)

S&F in repairs foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm all as specified and as directed.

S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long

Hacking out old broken glass panes 3 mm thick from steel/Aluminium frame including putty/ metal beadings and supply and fix sheet glass ordinary 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary arrangement new oil putty or with existing metal beadings complete all as specified and as directed

Hacking out old broken glass panes 3 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 3 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden beads complete all as specified and as directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed by Engineer-in-Charge

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed.

Supply and fix in repairs Stainless steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete.

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) as in apex stone and similar items complete all as specified and directed

M&L for angle such as hold fast and similar items etc complete all as specified and as directed

M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall filling holes on building (block of 8/16 qtrs) wall/roof/chajja/water tank staging area etc and making good with CM 1:4 complete all as specified & directed.

M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/Wiremesh, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charges.

M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and direction of Engineer-in-Charge.

M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of hadles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engneer-in-charge

M&L Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane 3mm thick complete all as specified and directed

M&L Sheet glass,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane 3mm thick complete all as specified and directed

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings for aluminium frame in square n exc 0.5 sqm in each pane complete all as directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in Roofs, floors (other than ground floors), tiles including existing roof treatment (screed plaster,& tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed.

M&L for applying acrlic based waterproofing flexible liquid single component, weather resistant acrylic water proofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc. using ultra voilet rays and heat reflecting system complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floors n exc 15 cm below or above ground level complete all as specified and as directed

M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) 25 mm thick finished even and rough to receive the top layer complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for non skid ceramic tiles (Coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No 55 here-in-before but on vertical surfaces including 10mm thick screed plaster in CM 1:4.

M&L for glazed ceramic tiles (coloured) 450x350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed.

JAY PRAKASH SHARMA (BID ID -3262454)

RADHA MADHAV CONSTRUCTIONS (BID ID -3267345)

M/s Pal Construction (BID ID -3267489)

Sunil Traders (BID ID -3262457)