WRIDD/EE(AI)/TAM/eNIT12/25-26

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m Page No: 10. PWD(Build) S.O.R.] item no-1(a) &(b)

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 mn ground floor including rooc)In 1 st floorf Page No: 10. PWD(Build) S.O.R.] item no-2(a) &©

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed Page No: 11. PWD(Build) S.O.R.] item no-10

Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works. [Item No: 17. Page No: 112. PWD(Build) S.O.R.]

Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only). [Item No: 31. Page No: 152. PWD(Build) S.O.R.]

Brick work with 1st class bricks in cement mortar (1:6)(a) In 1st Floor superstructure.[Item No: 8b&14a. Page No: 15&16. PWD(Build) S.O.R.]

Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface[. Page No: 203,item no-3. PWD(Build) S.O.R.]

Regrading mouth of down pipe for easy out let of rain water including cement plaster (1:3) including cutting slope and mending damages. (Cement 57.0 Kg/100 Nos)[. Page No: 208,item no-4. PWD(Build) S.O.R.]

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in 1st Floor . [Item No: 16. Page No: 16. PWD(Build) S.O.R.]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary(Ground floor) [Excluding cost of chipping over concrete surface] (i) With (1:6) cement mortar (b) 20 mm thick plaster Page No: 16. PWD(Build) S.O.R.]

c) 15 mm thick plaster

(ii) With 1:4 cement mortar(c) 10 mm thick plaster chajja repair,Kitchen

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes. approved rate of S.E, Bankura (A.I) vide T.S no-262/2022-23 Dated 31.03.23

Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening andremoval of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16gauge black annealed wire at every intersection, complete as per drawingand direction. approved rate of S.E, Bankura (A.I) vide T.S no-262/2022-23 Dated 31.03.23

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) Page No: 42.item no-36(a) PWD(Build) S.O.R.]

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance:Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area ofbuilding e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. setin 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).. PWD Build. SOR page;280 item:1(b)

Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. (Page 68, item 39)

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone loor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)B) Light Colour Page No: 66.item :36(1)b PWD(Build) S.O.R.]

Wood work in door and window frame fitted and fixed in position complete including a rotective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). i) Sal : Siliguri. PWD (Building) SOR,Page :135,item 1(i)

(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) (PWD (Building) SORPage 175, item 5)

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. Same as item 15 (PWD (Building) SORPage 203, item B 1)

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor a) 35 mm thick shutters (single leaf) PWD (Building) SOR page:124 ,item:12(b)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coat i) Water based interior grade Acrylic Primer (PWD (Building) SORPage 195, item 7)a(ii)

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ( PWD BUILDING VOL- 1 , PAGE NO -243, SL-9(ii,iv,xiii) i) 4mm thick coloured / tinted / smoke glass. (window),W at stair side

v) 5mm thick coloured / tinted / smoke glass. (bathroom door)

A. ORIGINAL WORKS (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.PWD (Building) SOR,page:104,item:13(a)(ii) ii) Grill weighing above 16 Kg./sq.mtr and above

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality PWD (Building) SOR ,Page 201, item 4 ii)

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (PWD (Building) SOR,Page 200, item 1 a)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) PWD (Building) SOR,Page 200, item 2b)

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixedcomplete. ii) Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type (PWD (Building) SOR 2018,Page 143, Item 23ii a)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1,SDR-11 32 mm (Dia) ((PWD (Sanitary & plumbing) SORPage 29, item 1) of P.C.S. (PWD) 2017 Tank To Toilet Outside

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) b) For Concealed Work (Page13, item 19(b)) of P.C.S. (PWD) 2017

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm ((PWD (Sanitary & plumbing) SOR(Page 68, item 23A) of (PWD) 2017

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings (ii) Plain Tee (b) 110 mm ((PWD (Sanitary & plumbing) SOR(Page 68, item 23B) of (PWD) 2017

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings (iii) Door Tee (b) 110 mm ((PWD (Sanitary & plumbing) SOR(Page 68, item 23B) of (PWD) 2017 For Sewage Line

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings ix) Bend 45º (b) 110 mm ((PWD (Sanitary & plumbing) SOR(Page 68, item 23B) of (PWD) 2017 For Sewage Line

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings x) Bend 87.5º (b) 110 mm (((PWD (Sanitary & plumbing) SORPage 68, item 23B) of (PWD) 2017 For Sewage Line

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings xii) Door Bend (LH) & (RH) (b) 110 mm (Page 68, item 23B) of. (PWD) 2017 For Sewage Line

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings xvi) Pipe Clip (b) 110 mm (Page 68, item 23B) of (PWD) 2017 For Sewage Line

Labour for fitting and fixing U.P.V.C. pipes for above ground workincluding cost of jointing materials etc. fitting and fixing all necessaryspecials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground (ii) 110 mm dia. ((PWD (Sanitary & plumbing) SOR(Page 74, item 24) of (PWD) 2017

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (Page 79, item 2) of P.C.S. (PWD) 2017

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. (Page 36, item 2) of (PWD) 2017 Toilet

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C (ii) Plastic (hallow type) white ((PWD (Sanitary & plumbing) SOR(Page 81, item 10) of (PWD) 2017

Supplying of Jaquar make western commod set Model- Kubix single piece WC with UF soft close sat cover , Hinge , Dual Flush cistern Fitting , fixing Accessories and Accessories set size 370 x 695 x 795 mm Strap-300 mm code- KUS-WHT - 35851S300UF. approved rate of S.E, Bankura (A.I) vide T.S no-262/2022-23 Dated 31.03.23

Supplying, fitting and fixing white vitreous china JAQUAR make full pedestal rectegular wash basin(Queens Prime) with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats ofapproved paint including cost of pedestal etc.(approved rate of S.E, Bankura (A.I) vide T.S no-262/2022-23 Dated 31.03.23

Supplying, fitting and fixing JAQUAR make CP Wall Mixture 3 in 1 without spout but with provision for connnection toTelephone Shower and exposed pipe for Overhead shower Model - FLORENTINE approved rate of S.E, Bankura (A.I) vide T.S no-262/2022-23 Dated 31.03.23

Supplying, fitting and fixing shower of approved brand and make (iii) Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). ((PWD (Sanitary & plumbing) SOR(Page 3, item 3iii) of (PWD) 2017

Supplying, fitting and fixing bib cock or stop cock. (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) ((PWD (Sanitary & plumbing) SOR(Page 6, item 7a) of (PWD) 2017

Supplying, fitting and fixing pillar cock of approved make. f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). ((PWD (Sanitary & plumbing) SOR(Page 45, item 19f) of (PWD) 2017

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long ((PWD (Sanitary & plumbing) SOR( Page 43, Item no.9)

Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (ii) 25 mm dia. and 600 mm long ( Page 82, Item no.22)

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent) ((PWD (Sanitary & plumbing) SOR( Page 82, Item no.18)

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm ((PWD (Sanitary & plumbing) SOR( Page 82, Item no.19)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.a) One Coat PWD (Building) SOR( Page 196, Item no.8(a) , 1 st Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer..(iii) Two coats. b) Premium 100% Acrylic Emulsion(PWD (Building) SOR Page 197, Item no.17,b)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Make-Legrand/ABB/L&T 2+12 way

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. Make-Legrand/ABB/L&T6-32 A SP

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. Average run 9 mtr

Average run 11 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.On Board

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

S&F wall mounted mirror light luminaries suitable for 1x9W LED complete with metallic channel white regulator base for higher light efficiency incl. connection. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 2 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 4 Module

,Supply & Fixing 10A, Bell Push Switch with Indicator on existing GI Modular type switch board having top cover plate and making necessary connections as required. Make-Anchor Roma approved rate of S.E, Bankura(A.I) dt 22.12.2023

,Supply & Fixing 32A D.P. Main Switch With Key Ring Tag on existing GI Modular type switch board having top cover plate and making necessary connections as required. Make-Anchor Roma approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing 32A, D.P Switch with LED Indicator, 2 Module on existing GI Modular type switch board having top cover plate and making necessary connections as required. Make-Anchor Roma approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing Down Light / Foot Light (LED - White) With Variable Shutter Regulates Light Ouput (3 module white cool day light) on existing GI Modular type switch board having top cover plate and making necessary connections as required. Make-Anchor Roma approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing 230V/50HZ AC Rcess mounting Decorative round Luminary of 20 W GreenPerform Sleek is a high performance low-height LED downlighter suited for requirements of any modern professional workspace. (Make-Philips Cat no- DN296B LED20S-6500 PSE WH S1)

Supply & Fixing 230V/50HZ AC 18 W LED 6500 K Unique slimmest recess com surface panel, solution to provide variable cutout size for installation in recess.Make-Havells (SM200C LED15S 4000 PSU OD WH)/Philips/crompton.

Supply & Fixing 230V/50HZ AC LED Strip Light SKYCove 5M CDL with driver,Driver included in pack (24W output) .Make-Havells /Philips(LED Strip SKYCove 5M CDL with driver)/crompton. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing 230V/50HZ AC 1 N x 9 W LED Lamp/ 1 N x 7.5 W LED filament lamp Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base.Make-Havells(LHFOAJD1TZ1I060)/Philips/cromptonapproved rate of S.E, Bankura(A.I) dt 22.12.2023.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Fixing 240 Hz 48" sweep(1200mm)ceiling fan complete with down rod,canopy,fork etc. Make-Orient,Crompton-(Gianna) approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & Fixing AC wall bracket fan with regulator of 16” with net guard and all accessories.Make-Orient/Crompton-WM HS Gale Plus (NEW) approved rate of S.E, Bankura(A.I) dt 22.12.2023

S&F 9" dia heavy duty exhaust fan with louver shutter heavy gauge to be fixed on wall with necessary cutting of wall etc. and mending good the damages. Make-Orient/Crompton-Trans Air 9"

S & D of 240v, 20W master LED tube 2100lm PC boby Make-Havells(Stella Glamtube 20 W 6500 K) Philips/ bajaj/ crompton.

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required.

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required.

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high Conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.20mm size

Supply & Fixing EI danger board on wall(15 cm x 10 cm (6"x4")

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5sqmm

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke .FOR ELECTRODE

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.No. 4 SWG

Supply & Install of polyvinydene coated ACB board (3 mm thick) aludecor/alstone/timex make of size 6 feet X4 feet = 24 sqft [ 1 or 2 part as required] as much a manner that it can be opened towards up or side wise. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & fixing of MS Angle 1" X 1", 3 mm thick around the front edge of ACP board and structure including neccesory screw/nuts bolts as required. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply and fixing of GI sheet of 22 SWG at back side of structure. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply & fixing of 300 watt power supply unit for LED module IP 65 (rainproof) approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply and fixing of 1.5 sqmm PVC copper wire for wiring of LED modules to power supply unit.approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supply and fixing of 250 mm X 150 mm X 100 mm Hensel make out door type (water tight) PVC loop box with cable entry arrangement. approved rate of S.E, Bankura(A.I) dt 22.12.2023

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.4 Module

Supply Godrej Steel Waredrobe H, Locker, colour-Tex Denim Blue (Product ID-30161803SD00828) approved Rate of SE,Bankura(A.I) forDigha Bumgalow

Installation charges (cable,water pipe,outlet copper pipe & wire all ompete) approved rate of S.E, Bankura(A.I) vide T.S no-262/2022-23 dt 31.03.2023

Supplying fittings fixing planer platenium wall mount 304 grade stainless steel bath room mirror cabinet with accessories /storage organiger (14x20 inch) / equivalent approved rate of S.E, Bankura(A.I) vide T.S no-262/2022-23 dt .31.03.2023

Supplying Bombay Dyeing around world 144 TC Double bed sheet with 2 pillow cover in 274x274 cm / equivalent in bed room ,approver rate of SE(AI), Bankura(AI) Circle dt.22.12.2023

Supply & delivery of Microfibre Pillow size-27x18x5 inches, brand-Sleepsia os simmilar type .approved rate of S.E, Bankura(A.I) dt 22.12.2023

Add GST @ 18% on Total of (SL. No.1 to 115)

Add CESS @ 1% on (Total cost of SL.No.1 to 115+GST @ 18% on Total cost of Sl. No. of 1 to 115)