REPAIR TO FURNITURE AT MILITARY STATION NAHAN UNDER GE CHANDIGARH

Amount

Removing old unserviceable plastic niwar from charpoy GI pipe and reweaving with new plastic newar 50 to 55mm wide made out of first qualitythred in colour interwoven closely both on top and bottom with 34 beands on long rail and 14 bends on short rail as approved by GE complete all as specified & shown on drawing and as directed by Engr-in ChargeNote: (i) Recycled materials shll not be used in the work (ii) Weight of the nylon newer shall not be less than 1.5 kg / each charpoy

M&L for re-canning to wooden chair with 1STclass plastic cane 2mm wide half round white colour as per "Godrej" pattern including polishing complete all as specified and as directed by Engineer-in-charge.

M&L for re-canning of seat & back of chair verandha with 1st class plastic cane 4mm wide half round white colour in matt pattern and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and as directed by Engineer-in-Charge.

Taking out carefully old existing unserviceable lock of any size without any damage to the Almirah Steel and provided with new lock of any type Gde-1 qualite conforming to 1S with duplicate keys, complete all as specified and as directed by Engineer-in Charge.

Taking out carefully old existing unserviceable handle from almirah steel and provided with newhandle MS chromium plated,complete all as directed by Engineer-in Charge.

Painting including denting if any applying one cote of synthetic enamel panint to almirah steel large on external surface only complete all as specified and shown on drawing (shade shall be approved by GE)

All as per above item No. 6 here in before but for almirah Steel Glazed.

All as per above item No. 6 here in before but for almirah Steel.

Seat cushion of foam 32mm density covered with resin & fixed cup nails for chair dinning.

Long back cushion of foam 32 density covered with resin & fixed cup nails for chair dinning.

Seat cushion of foam 32mm density covered with resin & fixed cup nails for chair writing with back.

M &L for repair to chair easy /chair dining /chair writing by replacing unserviceable part in lieu of provided with new Front leg made of 'Shisham' wood including polishing with French polish to external suface of wood complete all as specified and as directed by Engineer- in - Charge.

All as per item NO 12 above but Rear leg

All as per item NO 12 above but Front/Side/rear rail

All as per item NO 12 above but Arm

M&Lfor repair to table with drawer of size 900mmx600 x 760mm by replacing unserviceable part in lieu of provided with new following parts Complete all as specified and as directed by Engineer-in-Charge,(a) Table top 900mmx600x760 mm made out of 19mm thick pre-laminated board & 4mm thick teak wood beading top with nails

All as per above item No 16 here-in-before but table center(900mmx450mm)

All as above item No 16 here-in-before but teapoy verandah (900x450mm)

All as per above item No 16 here-in-before but teapoy wooden (600x450mm)

All as per above item No 16 here-in-before but table peg (450mmx450mm)

All as per above item No 16 here-in-before but table writing med 1200mmx600mm)

All as per above item No 16 here-in-before but table cook steel top (300x900mm)

All as per above item No 16 here-in-before but table 6 persns

Removing to unserviceable long rail having both threaded ends broken in liew of provided with new long rail medium brade ISI marked duly threaded both ends complete all specified and as shown on drg

Removing to unserviceable short rail having both threaded ends broken in liew of provided with new short rail made out of broken long rail obtained from sri item No 24 here-in-before, threaded both ends of short rail and fixed in position complete all specified and as diected by Engineer-in-charge

Removing to unserviceable legs and provided with new leg made out of short rail obtained from sri item NO 24 above threading and fixed in a positione complete all as specified and as directed by Engineer-in charge

Removing to unserviceable 3way elbow, 32mm bore in lieu of provided with new 3 way elbow 32,, bore duly ISI marked fixed in position complete all as specified and as directed by Engineer-in-charge

Removing to unserviceable check nut and provided with new check nut of 32mm bore and 6mm thick and fixed in a position complete all as specified and as directed by Engineer-in-charge

Removing of unserviceable wooden block from lower ends of leg and provided with new Ms plate of 50mm diax3mm thick welded to lower end of leg complete all as specified and as directed by Engineer-in-charge

M&L for repair to table clerk steel (1200mmx600mm) with drawer of by replacing unserviceable part and provided with new following parts complete all as specified and as directed by Engineer-in-charge for table top made out of 19mm thick per-laminated particle bord & 4mm thick teak wood beading around top fixed with nails.

All as per item no 30 above but lock with 2Nos keys

All as per item no 30 above but Painting with synthetic colour to complete steel suface to table

M&L for repair to table officer steel (1350x770mm) with drawer by replacing unserviceable parts in lieu of provided with new following parts complete all as specified and as directed by Engineer-in-charge for table top made out of 19mm thick pre-laminated particle board & 4mm thick teak wood beading around top fixed with nails

All as per item NO 33 above for Lock with 2Nos Keys

All as per item NO 33 above for painting with sythetic colour to complete steel surface to table

M&l for replacement of top of table dinning OR's size 900x900x750mm made out of 19 mm thick per-laminated paticles one side teak face and provided teak wood beading/edging of size 19mmx4mm fixed around the top of Table duly painted with synthetic enamel colour complete all as specified and directed by Engineer-in -Charge

M&L for replacement of top of table dinning officer size (1500mmx900mm) 6 persons made out of 19 mm thick per-laminated paticles one side teak face and provided teak wood beading/edging of size 19mmx4mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of top of table dinning officer (1800mmx900mm) 8 persons made out of 19mm thick per-laminated particles bord one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge

Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 32 density covered with tapestory cloth & cloth stitched with best qualitythread complete all as specified and directed by Engineer-in-Charge Make of foam cushion:- sleep well / Kurlon/Feather foam Note:- Tapestory cloth shall be of minimum rate 350/-per metre

M&L for repair to bed ply wood by replacing unserviceable parts provided with new for Head Rest covered with 3.5mm thick ply wood one side teak face other side commercial face complete all as specified and as direted by Engineer-in-Charge

All as per item No 40 above but Foot rest covered with 3.5mm thick ply wood one side teak face other side commercial face.

All as per item No 40 above but long rail made out of sheasham wood

All as per item NO 40 above but ply wood top made out of 12mm thick ply wood

All as per item No 40 above but ply wood top 7x3 made out of 12mm thick ply wood

All as per item No 40 above but ply wood top 7x4 made out of 12mm thick ply wood

S&F as in repairs 12mm thick (1980 mm x 900 mm size) both side commercial plywood top (ISI marked) BWR grade with & including MS Flat iron 32mmx5mmx900mm long for 04 Nos in each charopy having one Nos hole near each and of fixing the plywood top with purpose made round head mild steel nuts & bolts/washer welded and applying two coats of synthetic enamel paints in black clours over a coat of red oxided primer complete all as specified and diected by Engr-in-Charge. Note:- Tht rate quoted agianst the item shall deem to be included for necessary welding & painting works etc, all as specified and as directed

Repair overall size of lockers 100x600x760mm PB sheet 1.00 mm thick shall be used through out steel hinges 65mm shall be fixed with shutter and CP handle 100mm long and CP hasp and staple 75x40x3mm shall be fixed with shutters 20mm dia CP conduit pipe 1.6mm thick with socket shall be provided. Rest all as per drg. including spray painting internally and externarly with two cote of red oxide chromate primer.

Preparation of old treated wood and wood based surfaces of any description over 10 cm in width or Sqm grith and applying one cote of varnishing (finishing coat with synthetic varnish complete all as specified and as directed

Removing of unserviceable old defaced mirrors unserviceable back plywood of mirror frame of table dressing ladides and S&f sheet galss electro copper plated mirror 5mm thick and plywood commerical BWR grade 6mm thick for back side to mirror frame and fixingh to table all as specified and as directed by Engineer-in-charge

All as per item No 49 here-in before but for table dressing gents all as specified and as directed

Removing of unserviceable top from the table dressing ladies S&F new top made out of prelaminated particle board 18mm thick with 3mm thick beadingh all as specified and as directed

All as per item No 51 here-in before but table dressing gents all as specified as directed

Removing of unserviceable broken plwood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6mm thick all as specified and as directed

All per item No 53 here-in-before but table dressing gents all as speciffied as directed

Removing of unserviceable sides and front side of drawer of table dressing ladies S&F new 18mm thick prelaminated particle board of both sides & on drawer front side beading 3mm thick all as specified and directed

All per item No 55 here-in-before but table dressing gents all as speciffied as directed

Removing of unserviceable broken plwood from back side board S&F plywood commercial 6mm thick BWR grade in single piece all as per specified and as directed

Removing of unserviceable Top from side board S&F new top of 18mm thick particle board (ext gde) one side teak face and other side white with 3mm thick beading all as specified and as directed

Removing of unserviceable sides from side board S&F new side of 18mm thick particle board (ext gde) one side teak face and other side white with 3mm thick beading all as per specified and as directed

Removing of broken/unserviceable door shutter of side board S&F new door shutter made out 18mm thick prelaminated particle board one side teak face other side white ext grade with 3mm thick beading all as specified &as directed

Removing of unserviceable broken plywood from drawer bottom of side bord S&F plywood commercial 6mm thick 5 ply BWR grade all per specified and directed

Removing of leg & frame removing of unserviceable particle board from bottom or side board S&F 18mm thick or particle board one side teak veneer face and other side white with 3mm thick beading and fixing the leg frame to side board all as directed and as directed

Removing of unserviceable particle bord from drawer front side bord S&F 18 mm thick of new particle board & one side teak veneer face and other side white with 3mm thick beading all as specified and as directed

Removing of U/S/Worn out existing shelf from the side board S&F new shelf all as per size and as shown in drg made out of 18mm thick prelminated particle board ext gde all as directed by Engr in charge

Removing the unserviceable front legs of set S&F new teak wood legs made to shape all per drg and as directed (3 seater/single seater)

Removing the unserviceable rear legs of set S&F new teak wood legs made to shape all per drg and as directed.

Removing the unserviceable arms of sofa set S&F new teak wood arms made to shape all as per drg and as directed

Removing the unserviceable stiffeners of sofa set S&F new teak wood stiffeners made to shape all as per drg and as directed

Removing the unserviceable front & back rail of sofa set (3 seater/single seater) S&F new rail of reak wood made to shape all as per drg and as directed

Removing of U/S side rail of Sofa set (3 seater/single seater) S&F new Teak wood rail all as shown in drg & as directed by Engr in charge

Removing the Unserviceable front legs of set S&F new teak wood legs made to shape all per drg and as directed (4 x single seater)

Removing the Unserviceable rear legs of set S&F new teak wood legs made to shape all per drg and as directed.

Removing the Unserviceable arms of sofa set S&F new teak wood arms made to shape all as per drg and as directed

Removing the unserviceable stiffeners of sofa set S&F new teak wood stiffeners made to shape all as per drg and as directed

Removing the unserviceable front and back rail of sofa set (4x single seater ) S & F new rail of teak wood made to shape all as per drg and directed

Removing of U/S side rail of Sofa set (4x single seater) S&F new Teak wood rail all as shown in drg & as directed by engr in charge

Removing the unserviceable front legs of chair dining long back S&F new teak wood legs made to shape all as per drg and as directed

Removing the unserviceable rear legs of chair dining long back S&F new teak wood legs made to shape all per drg and as directed.

Removing the unservicable side rails of chair dining long back S&F new teak wood rails made to shape all as per drg and as directed

Removing the unservicable front rails of chair dining long back S&F new teak wood rails made to shape all as per drg and as directed

Removing the unserviceable bottom stiffeners of chair dining long back S&F new teak wood stiffeners made to shape all as per drg and as directed

Removing the unserviceable U/S & Worn out seat cushion with tapestry cloth from chair dining long back cushion and S&F new foam cushion 75mm thickof 40 density cushion of size as per drg. Note :- (i) welding portion should be done by Gas welding. (ii) Makes for above items : Ply wood : ARCHID/ CENTURY/ KITPLY Paint : ASIAN/ NEROLAC/ JOHNSON NICHOLSON Prelaminated board : ARCHIDLAM/ KITLAM/ NOVOPAN/ Lock : Harrison/Godrej/Link, GI Pipe : TATA/ JINDAL/ SWASTIK Nylon Newar: USHA/ EVERSHINE/ BONUS Plastic cane : SHAH/ PREMIER/ ARIHANT,Mirror : ATUL/ MODIGAURD/ SAINT GOBIN Wood : SHISHAM/ TEAK WOOD Laminated Sheet : FORMICA/ MARRINO/ KITMICA/ CENTURY Foam : MM FOAM/ KURLON/ SLEEP WELL

CITIZEN FURNITURE INDUSTRIES

Daya Nand Jindal