RENOVATION OF ADMINISTRATIVE BUILDING ITI, JARMUNDI UNDER JARMUNDI BLOCK, DIST-DUMKA

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying Iron and Steel Materials as per specification and direction of E/I. Use in Door Chaukhats

Supplying Welder Grade - 1 as per specification and direction of E/I.

Supplying Helper as per specification and direction of E/I.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (iv) 600X600 mm size

Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Marble stone flooring with 18mm marble stone ,as per samle of marble aproved by Engineer-in-charge,over 20mm(average)thick base of cement mortar 1:4 .(Raj Nagar Plain)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With "A" grade white 15X15cm Tiles.

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm ,made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15 mm M.S. square tube , the vertical door profiles to be renforced with 19x19mm M.S. square tube of 19 gauge, EDPM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of E/I.

Providing and fixing to existing door frames 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gage thickness and size of 19mmx19mm for styles and 15x15mm for top& bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer.M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming styles; and 5mm thick ,95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVCsheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail.Top bottom and lock railsshall be provided either side of the panel.10mm (5mmx2) thick ,20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7mm (5mm+2mm) thickx15mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive . An additional 5mm thick PVC strip of 20 mm width is to be stuck on the interior side'C' Channel using PVC solvent adhesive etc complete as per direction of E/I, Manufacturer's specification& drawing ( for W.C. and bath room door shutter).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying cement based putty of av. Thickness 1mm over plastered surface to prepare the surface even and smooth complete

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over red lead paint over steel surface including cleaning the surface thououghly, scaffolding and taxes all complete as per building specifications and direction of E/I

Providing Tor steel reinforcement of 8 mm, 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. {only valid for TATA (Tiscon), SAIL, JSPL, Electrosteels Ltd. Bokaro and Vizag (RINL)}

8mm dia. bar

10mm dia. bar

Supplying Un Skilled Labour for Cleaning the Site all complete job as per specification and direction of E/l.

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item –A) and disposal of excavated earth as obtained to a distance up to 50 M. Trenches , removing roots of trees , shrubs all complete as per approved design, Building specification and direction of E/I.

Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. Thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost ofWatering, taxes, royalty, all complete as per building specification and direction of E/I.

Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Supplying, fitting and fixing 550mmx400x400mm size vitreous white glazed earthan ware ware wash hand basin of ‘Parry’ or Hindustan or any other I.S.S approved make supported on painted C.I or R.S brackets 32mm C.P brass spindle stop cock of approved quality of weigth not less than 450 gms. 15mm P.V.C pipe 450 mm long with brass coupling 15mm dia C.P Brass pillar cock of approved quality weight not less than 350 gms 32 mm P.V.C waste pipe 750 mm long with brass coupling at noe end and making plumber joint etc. all complete as per specifications and direction of E/I

Supplying, fitting and fixing vitreous white glazed earthenware I.W.C of Parry, Hindustan or any other I.S.S approved make with 100 mm H.C.I 'P' trap, 15 litres (high level) C.I pull and let go flushings cistern-1 12.5 liter low down C.I mosquito Proof flushing cistern of Nomus or other I.S.S equivalent make, Complete with all fittings, C.I or R.S bracket, 32 mm alkathene/ P.V.C telescopic flush pipe about 2 meter long with one brass coupling and clamps. C.I chain and pull including supplying and fixing a pair of vitreous white glazed earthen ware foot rest to be fixed in floor , 15 mm C.I body brass spindle stop cock of weight not less than 450 gms, P.V.C connection pipe 45 C.M. long and with brass couplings and doing plumber joints and painting all th exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specifications and direction of E/I 580mm long With 10.0 litre low level P.V.C. cistern

Supplying , fitting and fixing flat back or angular, lipped front vitreous white glazed earthenware urinal of 'Hindustan' 'parry' or any other approved I.S.S make with 5 litres capacity C.I automatic flushing cistern of Reliance or any other I.S.S approved make with all fittings with C.I or R.S brackets standard size, G.I flush pipe with fittings, clamps, 15 mm body brass spindle stop cock or approved quality weight not less than 450 gms. 15mm P.V.C/ Alkathene pipe 450 mm long with brass coupling at both ends and doing plumper joints including painting of exposed part with two coats of approved paint oer a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specifications and directin of E/I Flat back or standing corner(600mmx350mm)

Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt not less than 350 gms) with extra socket all complete as per specifications and direction of E/I

Providing and fixing brass/C.I stop cock of approved quality all complete as per specifications and direction of E/I (A) BRASS STOP COCK 15mm dia

Supplying fitting and fixing 15mm C.I brass pillar cock wt. not less than 400 gms as per specifications and directin of E/I

Providing and fixing G.M Non-return valve Horizontal/ vertical type ofapproved quality as per specifications and direction of E/I.

Horizontal non-return valve 25mm dia. wt. not less than 375 gms.

Vertical non-return valve 25 mm dia weight not less than 375 gms

Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350gms C.I. body brass spindle pillar cock of approved quality as per specifications and direction of E/I C.I. body brass spindle

Providing and fixing Gun metal full way valve of approved quality all complete as per specifications and directions of E/I 25mm dia and weight not less than 500 grms

Supplying fitting and fixing the following items complete with all materials as per specifications and direction of E/I

Glass self with C.P. brass rails 600x125mm glass self complete

Mirror of 6 mm thick plate glass beveled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror 600mmx450mm

C.P. brass dish container medim quality with screw and hinges etc.

C.P. brass towel rail 20mm x600mm with bracket container

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:0 with 600x475mm G.I cover with frame (weight not less than 36kg) along with earth work in excavation and 80mm thick P.C.C (1:3:6) in foundation and refilling all complete as per specification and of E/I

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge

15 mm dia.

20 mm dia.

25 mm dia.

Making holes in walls for laying G.I pipes and restoring th same after pipe laying as per specifications and direction of E/I 125 mm thick wall

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, Single socketed pipes. 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 110 mm dia

Single pushfit Coupler 110 mm dia

Single tee without door 110 mm dia

Bend 87.5° 110 mm dia

Shoe (Plain) 110 mm dia

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mmdiameter, 1.8 m long complete as per standard design.

Wiring for light point/fan point /exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable G.I. Box etc are required. Group - B

Wiring for light plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC PVC conduit along with 1 Nos. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2 x1.5sq.mm. + 1 x1.5sq.mm. earth wire

2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire

2 x 4.00 sq. mm + 1 x 4.00 sq. mm earth wire

2 x 10.00 sq. mm + 1 x 6.00 sq. mm earth wire

S/F Modular type switch socket - Supplying and fixing of following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required

5/6 amps, one way switch

5/6 amps, 3 pin socket outlet

S/F power plug point with Modular type accessories - Supplying and fixing suitable size G.I. box with modular plate cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required.

Supplying and fixing batten/angle holder including connection etc. as required

Supplying and fixing 3 pin 5 amp. Ceiling rose on the existing junction box/wooden block including connection etc. as required

Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required. 6/32, single pole, "B" series

S/F DP MCB isolator :- Supplying and fixing followng rating, double pole ,240volts, solator in the existing MCD DB complete with connections,testing and commissioning etc as required. 40 amps

S.I.T.C of floowing rating surface mounted LED tube Light fitting suitable for 230V 50Hz, single phase supply etc. complete ar requlred. 10/12W LED tube light

Supplying ftting and fxing 9/10 Watt LED Bulb as required.

S/F rewireable double pole/TP & N switch disconnector :- Providing and fixing following DP/TP & N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuse, including drilling holes in metal board, making connections, etc. as required. 16 Amp double pole

Supply, Installation, testing and commissioning of following, size ceiling fan 3 Blades confirming to IS : 374 : 2019 including wiring the down rods of standard length (up to 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required. 1200mm (48") Ceiling Fan

S/F Modular type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connection but excluding modular plate etc. as required.

S/F Modular Boxes, base & cover plate: - Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (78mm x 78mm x 45mm)

4/5 Module (78mm x 140mm x 50mm)

6 Module (78mm x 205mm x 50mm)

8/9 Module (78mm x 230mm x 60mm)

12 Module (135mm x 205mm x 60mm)

Supply of 12'' dia metal Exhaust fan (Usha/Pollar/Havells/Polycab/V-guard/Bajaj)

ITC Exhaust Fan upto 450mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage condition testing commissioning etc, as required.

Laying of one number PLCA/pvc insulated and PVC sheathed/ XLPE power cable of grade excedding 1.1KV but not exceeding 11 KV of size excedding 120 sq mm drect in ground including excavation, and cushioning, protective covering and refilling the trench as required.

Carriage cost of materials

Stone chips

Stone metal

Bricks

Add 18% GST (In Basic Rate must fill 0.18)

Add 1% Labour cess (In Basic Rate must fill 0.01)

M/S DEV CONSTRUCTION (BID ID -670121)