REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION, STREET LIGHT, DG SET AND MISC EM WORKS AT ZONE A UNDER AGE EM AF GURGAON OF GE AF GURGAON

Amount

M & L in replacement of concealed point wiring complete with PVC insulated and unsheathed flame retardant ( FR ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductorcable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-

(a) One light / fan point controlled by one switch

(b) One 5 Amp socket outlet on independent board.

(c) One 5 Amp socket outlet on same board.

(d) One bell/buzzer point controlled by one bell push

(e) One light point controlled by two 2-way switch

All as per item No 1 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant ( FR ) cable for 1 5 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

S&F switch piano in replacement flush button type 5 Amp single pole one way complete all as specified and as directed. Make:- Anchor/Havells

S&F socket outlet in replacement of 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S&F switch piano in replacement of flush button type 15 Amp single pole one way complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S&F socket outlet in replacement of 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S&F switch piano in replacement of flush button type 5 Amp single pole 2 way complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S&F in replacement switch bell push button type 5 Amp single pole complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S&F in replacement Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed. Make:- Anchor/Legrand/Schneider/L&T

S & F in replacement of Lamp holder,bakalite type with back plate suitable for batten fittings complete all as specified as directed

S&F in replacement of ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F Enviromental friendly, ultra modern, energy saving,surface mounted,decorative oval bulk head Edge lit LED luminaire comprising of high brightness LEDs,out door type, weather proof 10W bulk head Industrial Luminaire duly prewired with inbuilt LED Modules & accessories, with IP65 Protection of Havells Model ENDURA RUGBY NEO N -IP65 Cat Ref: RUGBYNEONFT10WLED860SSYMTOPC or EQVT in Philips/crompton greaves/C&S

S & F in replacement of sub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn into existing / new conduit of any size and type / casing-caping with and including one run of 4sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green coour as continuous earth wire including lugs etc connected and tested complete all as specified and directed. Note: (i) New conduit/ casing- caping and accessories shall be measured separately. (ii) Two runs of 4.0 sqmm cable and one run of 4 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S & F in replacement of sub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn into existing / new conduit of any size and type / casing-caping with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green coour as continuous earth wire including lugs etc connected and tested complete all as specified and directed. Note: (i) New conduit/ casing- caping and accessories shall be measured separately. (ii) Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S & F in replacement of Regid non-metallic PVC conduit 20 mm (external dia ) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and directed

S&F AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display of rating 10-60A. (Measures & displays kWh Only) with Transparent Hinge type Box.

S&F in replacement of sheet metal enclosure double door distribution boards 4 ways Triple pole & neutral 415 V complete all as specified and as directed .

S&F in replacement of sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 8 ways 240 V complete all as specified and as directed.

S&F in replacement of sheet metal enclosure double door concealed suitable for distribution boards when MCB to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed .

S&F in replacement of single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 25Amp complete all as specified and directed of Make :- Standard /L &T /Legrand

S&F in placement of MCB single pole and neutral 40 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed.

S&F in replacement of MCB single pole 6 to 32 Amps 240 V,10KA, 'B' series,complete all as specified and as directed. Note: Different rating of MCB as per site requirement & It is recommended by JE E/M.

S&F in placement of MCB Triple pole 40 Amp 415Vomplete all as specified and as directed.

S&F 20W LED tube light fitting 1x18 Watts 1150x25x40 dimension having CCT 5700 K,220 to 240 volts with polycarbonate /extruded aluminium alloy/powdwer coated CRCA sheet housing,bipin holder connector block etc complete withall accessories internally prewired and including connecting up with twin core twisted flexible conductor cable of suitable size all as specified and directed.MAKE-HAVELLS( Cat part- LUMILINEBS18WLED865SPCWH) ,CROMPTON GREAVES,OSRAM and its equivalent model.

S & F in replacement modular switch one way 6 Amp,1 module complete all as specified and as directed.

S & F in replacement modular socket 6 Amp,2/3 pin combined 2 module complete all as specified and as directed.

S & F in replacement of modular switch one way 16 Amp,1 module complete all as specified and as directed.

S & F in replacement of modular socket 16 Amp,2/3 pin combined 2 module complete all as specified and as directed.

S & F In replacement of modular switch 2 way, 6 Amp,1 module complete all as specified and as directed.

S & F in replacement of modular Fan Regulator fan step regulator,120W-2 module complete all as specified as directed.

S & F In replacement of modular bell push 6 Amp ,1 module complete all as specified and as directed.

S&F in replacement of modular blanking plate, 1 module complete all as specified and directed.

S&F in replacement of modular plate frame with box , 1 module box size 3x3 inch complete all as specified and directed. Make- Havells or equivalent make.

S&F in replacement of modular plate frame with box, 2 module box size 3x3 inch complete all as specified and directed.

S&F in replacement of modular plate frame with box, 3 module size box 4x3 inch complete all as specified and directed.

S&F in replacement of modular plate frame with box, 4 module size box 5x3 inch complete all as specified and directed.

S&F in replacement of modular plate frame with box, 6 module size box 8x3 inch complete all as specified and directed.

S&F in replacement of modular plate frame with box, 8 module size box 5x5 inch complete all as specified and directed.

S&F in replacement Powder coated pressure die cast aluminium compact LED building light of 30watt confirming to IP 65, complete all as specified and as directed by Engineer -in-charge. Make: Crompton cat No: LSTP-30-CDL or equivalent make of Philips /Wipro/C&S/Havell's Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates

S&F in replacement recessed mounting 36/42 watt LED 2X2 ft tile ceiling light with high performance with housed in aluminium/PVC body with inbuilt driver and diffuser suitable for POP ceiling having 3000K temp, complete all as specified and directed. Make: Havells cat No: VENUSNEOHE2X2PLR18-42WLED830MOD or equivalent make of Philips/ C&S/ crompton/ wipro

Supply and fix LED suspended architectural type luminaire of 20watt, T5 ceiling mounted LED light fitting, direct/indirect architectural luminaire suitable ceiling complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and directed at site. Make: Havells cat no: CONSTA544LP20WLED830SPMMAWH or equivalent type from make C&S /CG/Phillips/Wipro/Polycab/Havells NOTE: Fasterner or tie belt required at site shall deemed to be included in quoted rate.

Supply and fix Flexion LED Digital Color coordinated 5 m RGB strip IP40 with light travel function Comes with an IR remote. Make: Havells cat part: LHEHDNPNUN4F024 or equivalent items in different make.

S&F LED Driver for above item no 42 LED digital color coordinated 5m RGB strip.Make: Havells cat part: LSSLNW0135 or equivalent items in different make.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.

M&L cement concrete type B- 2, 1:4:8 (75mm graded aggregate) in sub floors concrete 75 mm thick for interlocking tiles.

Sand filling under floors for levelling and ramming including watering and consolidation.

Machine pressed precast conctete interlocking paver block any shape and size for floor tiling in MES Power House confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment.

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion. Note: Excavation and earth work, PCC pit and CI cover,Funnel with watering pipe, wire mesh and copper lugs,G.I. protection pipe of size 15mm upto 15m,Test point and extra length of main earthing lead beyond 7.5 metres,Connecting lead from test point to main switch or switch board or equipment to be earthed included in the quoted rate.

Dismantling steel poles/ struts, any size

M&L of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long)

S&F in replacement Powder coated pressure die cast aluminium compact LED building light/ street light of 45watt confirming to IP 65, complete all as specified and as directed by Engineer -in-charge. Make: Crompton cat No: LSTP-45-CDL or equivalent make of Philips /Wipro/C&S/Havell's

Supply and fixing in replacement of Integral pole mounted decorative LED post top gate light of 25 watt with IP-65 protection, 3000K temp suitable to fix on 40mm dia garden post top including nut bolt washer and wiring from junction box to globe, complete all as specified and directed. Make: Havell's Cat No: RUBYPT25WLED757PSYMTOPC or equivalent make of Crompton, Philips, wipro, C&S Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates

S&F in replacement Powder coated pressure die cast aluminium compact LED flood light of building light of 60/70W watt confirming to IP 65, complete all as specified and as directed by Engineer -in-charge. Make: Havells cat No: JETANEOFL70WLED757LTG or equivalent make of Philips /Wipro/C&S/Crompton

M&L for painting of steel tubular pole (straight and bend on top ) with aluminium powder base paint including painting of barbed wire at the top & ms frame pointer on pole and cable protection pipe and all iron parts of 9/11 mtr long pole complete with two coats of aluminium paint after cleaning all rust and dust and preparing surface with wire brush and including painting of strip (not less than 1 feet width) with white and red colour of synthetic enamel paint along with painting metallic junction box with aluminium paint complete all as specified. Note:- Numbering of pole with red paint on white paint base is deemed to be included in quoted rate.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core.

M&L of PCC 1:4:8 type D1 Concrete 15cm Depth in bottom of Pit for bed concrete steel tubular pole.

M&L PCC 1:3: 6 type C1 Concrete 1.5 Mtr Depth of concrete for fixing of streel light steel tubular pole.

M&L PCC 1:2: 4 type B1 Concrete 1.5 Mtr Depth for coping of above ground level of steel pole.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 1.5m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and laying sand in trenches for protection of cable sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers all as specified and as directed.

M&L Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 Old size bricks for the protection for underground cable.

S&F in repair GI pipe light grade 50mm bore in trenches/wall/poles for protection of cable complete all as specified and as directed.

Supply and fix 3 Phase automatic timer switch with switches ON/OFF the street lights base on lux level of natural light for 5/7kW load equally distributed over 3-phase,415V 50 Hz. The sensor based timer should also have over voltage and low voltage trip with auto reset facility the sensor alongwith suitable power contactor, MCB and support terminals should be enclosed in pole/wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade special moulding compounds confirming to IP 65. The contactor MCB and circuit wiring shall have enough capacity to take load of 5/7 KW equally distrubuted over 3 phase complete all as specified and as directed. Make : Healer/Universal Swtich Gear/Kakatiya Note: Fixing timer on wall/pole with the help of fastner & ms strip, nut bolt & washer is deemed to be included in quoted rates.

M&L for visiting of service engineer/ technician at site and inspecting DG set upto 250 KVA (including AMF panel problems, control unit/sensors, Engine, radiator, Alternator or any other type of complaint i.e. Mechanical, electrical or electronic or including all the three teams togather) and checking for fault/defect and noting down items required for rectification, including rectifying minor defect on site if possible, complete all as specified and directed. Note: (i) visit for servicing of DG set will not be considered in this item. (ii) Minor complaints occuring within one month after servicing of a particular DG set will not be considered in this item after lodging complaint to Contractor by Engineer-in-charge or JE. (iii) Visiting of Different technician i.e. electrical, mechanical, electronic or combine of three for the same complaint will be considered as one visit or one complaint only. (iv) Subsequent visit after first visit (defect found or not), if founded then visit for rectification of defect will not be considered in this item.

Dismantling of Fuel pump assembly and fuel injectors of any nos of engine for DG Set of capacity upto 250 KVA, and transporting it to workshop and Caliberation fuel pump & its fuel injection system and overhauling of pump valve, valve seat, Nozzel pin holes by metal deposition and machining on lathe machine, gasket, bolts etc. and refixing the same and commissioning till fuel consumption and quality & quantity of smoke is within permissible level complete all as specified & directed : Note: Transportation charges are deemed to be included in quoted rates.

Taking out of turbo charger from DG Set transportation to workshop for overhauling, repairing and replacement of turbo assembly including fan, gears and machining of vortex flow chamber of turbo & refixing to DG Set aand refixing the same and commissioning till fuel consumption, quality & quantity of smoke and load development/ sound of DG is satisfactory to EIC all as specified & directed : Note: Transportation charges are deemed to be included in quoted rates.

Dismantling of radiator assembly of engine of following capacity, and transporting it to workshop (if required) from site otherwise performing job at site. thereafter cleaning fins and chocked tubes after draining out water, washing with caustic, descaling and brazing for water tube leakage, repalcing of copper tube of suitable length and and size and refixing the same properly by deploying sufficient numbers of labour and commissioning and again checking for leakage after running DG on Load and checking flow speed of water through it, complete all as specified & directed : Note: Transportation charges are deemed to be included in quoted rates.

(a) 140 to 250 KVA

(b) Upto 100 KVA

M&L for Carry out 'B' check and servicing of DG set as per OEM specification for DG set of 250 KVA capacity, (including the cost of the following spares (quantity) all as per OEM and directed by Engineer in Charge). (i) Engine oil (ii) Spinon lube oil filter (iii) Fuel Filter Kit 1.1 Ltrs (iv) Coolant (v) Air cleaner Safety Element (vi) Air cleaner primary element (vii) K clean 1 ltrs (viii) Poly V belt 4PK/8PK (any type & length) (ix) Thermostat Element (x) Rubber hoses of any type with tie clips of suitable size (xi) Gaskets,glands, nut, bolts & washers (xii) Radiator cleaning from outside with pressure jet spray, chemical & brush (xiii) Cleaning of DG set engine within canopy and AMF panel (xiv) Freight & labour charges

Ditto as item No- 70, but for 160-140 KVA DG set.

Ditto as item No- 70, but for 100 KVA DG set.

Ditto as item No- 70, but for below 70 KVA DG set.

Dismantling of Self Starter motor of any capacity for DG Set of capacity upto 250 KVA, and transporting it to workshop and rewinding with suitable gauge of copper wire, overhauling, repair & replacement of gears, pinion & its locking arrangment, armature, Carbon plate, carbon bush & brush, Gears etcand and refixing the same and commissioning for the torque developed by it for starting DG Set, complete all as specified and directed. Note: Transportation charges and charges for dismantling & reconnecting electric cable of starter & synchronising with control unit are deemed to be included in quoted rates.

(a) 140 to 250 KVA (Suitable for 24 V)

(b) Upto 100 KVA (Suitable for 12 V)

S& F AVR S/F VARIABLE SPEED DCDG suitable for DG set with input voltage range 415 Volt AC with neutral & Out put DC voltage for DG set upto 250 KVA as per OEM specifications, including wiring as per required at site after taking down old unserviceable one, complete all as specified and directed.

Dismantling of alternator of DG Set of capacity upto 250 KVA, and transporting it to workshop and rewinding, overhauling, repair & replacement of rewinding with suitable gauge of copper wire, gear, pinion, pulley, carbon bush & brush etc upto 250 KVA as per OEM specification, including belts, wiring, demounting as per required at site after taking down old unserviceable one, complete all as specified and directed.

Supply and fixing following spares parts upto 250 KVA DG Set: Note: Taking down old spare parts and connecting new one by deploying skill technician (mechanical, electrical, electronics or combination) including necessary nut, bolts, washers, wiring, thimbling, tagging etc. is deemed to be included in quoted rates for item no 58 to 89.

Water pump assembly Make: Kirloskar

Flexible connection (crank case to pump) Make: Kirloskar

Water pump pulley (2 grooves, 190 PCD) Make: Kirloskar

Fresh water outlet connector on heat exchanger Make: Kirloskar

Fresh water outlet connector on heat exchanger Make: Kirloskar

Non return valve 1" BSP Make: Kirloskar

Thermostat and housing assembly Make: Kirloskar

MAGNETIC PICK UP 16X1.5 THREADING (UNITCH MAKE) for dg upto 250 KVA Make: Kirloskar

Engine control unit EMS 907 including relay card, PCB & logic card) Make: Kirloskar

CONTROL RELAY, 24 V D.C., THREE CHANNEL R.B. ELECTRONICS Make: Kirloskar

RELAY BOARD UL MAKE 24 VDC 2CH. 2C/O (RELAY- OMRAN make: Kirloskar

ENGINE WIRING ASSEMBLY SUITABLE FOR EMS 907 UNIT Make: Kirloskar

WIRING HARNESS FOR CPCB CANOPY WITH PRICOL PANEL Make: Kirloskar

WIRING HARNESS ASSEMBLY WITH EMS 907 UNIT make: Kirloskar

SENSOR UNIT(FOR ELEC TEMP GAUGE) Make: Kirloskar

LUB OIL PRESSURE SENDOR 0.75 +/- 0.15 BAR TWO TERMINAL Make: kirloskar

WATER TEMPERATURE SWITCH (NO/NC) Make: Kirloskar

STOP SOLENOID assembly suitable for 12/24V Make: Kirloskar

Thermostat element (74 Deg) make: kirloskar

CURRENT TRANSFORMER (SET OF 3 CT) 300/5A Make: Kirloskar

CURRENT TRANSFORMER (SET OF 3 CT) 500/5A Make: Kirloskar

KG 934 controller unit make: Kirloskar

Relay board 2 and 1/2 12 V DC Make: Kirloskar

Engine wiring harness assembly with KG934 Make: Kirloskar

LEFT HAND LOCK WITH CATCHER (UPTO 82.5 KVA) Make: Kirloskar

LEFT HAND LOCK WITH CATCHER ( 100 TO 600 KVA) Make: Kirloskar

RIGHT HAND LOCK WITH CATCHER (UPTO 82.5 KVA) Make: Kirloskar

RIGHT HAND LOCK WITH CATCHER (100 TO 600 KVA) Make: Kirloskar

LEFT HAND HINGE Make: Kirloskar

Right HAND HINGE Make: Kirloskar

V BELT RAW EDGED COGGED.(LP1176) Make: Kiloskar

FLEXIBLE LUB OIL PIPE(FOR REMOTE FILTER) Make: Kirloskar

M&L for cutting and removing burnt out AMF panel wiring and rewiring it with copper wire of solid/stranded conductor all as per existing size with proper labelling/tagging, new thimble/ termination, connecting all circuit & logical controls, repalcing relays, timers, sensors & signal reciever, removing carbon deposition on bus bars & terminals, repairing cable tray, rewiring and proper connection of AMF panel parameters with DG set safety control unit, replacing new CTs etc. Testing and commission of AMF panel in auto and manual mode and demostrating the functionality of all the safety parameter both from saftey control panel and AMF panel all as per EIC. NOTE: wiring, CTs, thimble, tagging, rewiring of DG set mounted safety control unit etc required are deemed to be in quoted rates.

Supply and fixing of digital VAF + PF meter, Cl 1in square in size of 96mm x 96mm cross-section for DG sets suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of DC Ammeter 0-30Amps of square in size of 96mm x 96mm cross-section, for DG sets suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of 'under/over voltage relay, 3 phase, 415 volts', for DG sets of capacity upto 250 KVA complete all as specified and directed by engineer-in-charge.

Supply and fixing of 'under/over voltage relay, single phase, 240 volts', (set of 3 for each phase in one panel) for DG sets of capacity upto 250 KVA complete all as specified and directed by engineer-in-charge. Make: Teknika or equivalent make

Supply and fixing of battery voltage relay 12/24 VDC suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing Three element overcurent and earth fault relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing frequency relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing engine start relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing speed relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of Fuse (HRC type) 400 amps, for DG sets of capacity upto 250 KVA complete all as specified and directed. Make: L&T/ABB/Havells

Supply and fixing LED lamp of any colour (Red, yellow, green and blue) suitable for 12/24 v DC & AC for DG sets of capacity upto 250 KVA, complete all as specified and directed.

S&F Lead acid Battery of 105 Ah, 12 V heavy duty for DG set, complete all as specified and directed.Make:EXIDE GENPLUS (GP115E41L) or equivalent make for 250KVA DG set.

Supply and fixing 250 Amp, 415 Volts, 50 Hz Power contactor of coil voltage 240 Volts, including spring operated add-on block and spring operated locking block along with spread suitable to bear current upto 350 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

Ditto as item no- 94, but of 225 Amp, 415 Volts, 50 Hz Power contactor, spreader suitable to bear current upto 300 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

Ditto as item no- 94, but 200 Amp, 415 Volts, 50 Hz Power contactor with spread suitable to bear current upto 250 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

M/S MG GROUP

NAVREET CONSTRUCTION

J B Electricals

akhil enterprises

Ridhi engineers and builders