Supply and Installation of Indoor and Outdoor Gym Equipments at village Nakora, Himmatpur, Rampura Their and Ranjitpur Their Block Rania District Sirsa

Amount

NS Itmes

Providing, designing and fixing Leg press size 153X137X152 cm fabricated with 2"X4" rectangular hollow pipe with 3.00 mm thick and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all weldings points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made upto of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00 mm , colourful and U V resistant environmental friendly, Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and basecover plaste and fixing of equipment etc.

Functional Trainer Machine All pipes made up size 2"X4" of hot rolled hollow rectangular MS Pipe with size 193X100X230 cm and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as neccessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00, colourful and U V resistant environmental friendly, Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plaste and fixing of equipment etc.

Multy GYM Six Station (Leg pull, Legh Curl with Leg Extension, Biceps with Triceps, Pec Dec Fly) Consists of 4 weighted stations and 2 light stations; and it is combination of 8 type of excersice this is Made up of Mainly Olympic rectangular pipe of 4'X2' with 2.15mm thickness with steel twisted wire with pvc/myloncoated cable 5mm-6mm; with pvc coated weight plates for noiseless working/movements, weight plates stack moves/slides in Stainless steel pipes for smooth and noiseless movement throughout lifespan of equipments, ball bearing mouted fibre/pvcpullys, heavy cushion padding on 12mm plys with special Non Abrasive fabric nontearing fabric. Each weight stackis 75 kg sheavy.

Superior Olympic Bench Flat (Made up of Mainly Olympic rectangular pipe of 4'X2" approx.; More nearest to approx. 170X168X137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special Non Abrasive fabric non tearing fabric. With two vertical pipes have clamp forresting rodonit, used for doing flatpattern Chestpressat One fixed level)

Superior Olympic Bench Incline (Made up of Mainly Olympic rectangular pipe of 4'X2' approx.; more nearest to approx. 163X165X137 Cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special Non Abrasive fabric non tearing fabric. With two vertical pipes have clamp forresting robonit, used for doing Incline level pattern chest press at one fixed incline level).

Superior Olympic Bench Deline (Made up of Mainly Olympic rectangular pipe of 4'X2' approx.; more nearest to approx. 210X166X137 cm with 2.15 mm thickness, heavy cushion padding on 12mm plys with special Non Abrasive fabric non tearing fabric. With two vertical pipes have clamfor resting rod on it, used for doing Decline level pattern chest press at one fixed Decline level with leg locking)

Spare Flat Bench For Dumbbell Fly Exercise (Made up of Mainly Olympic rectangular pipe of 4'X2' approx.; more nearest to approx 121X75X46 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with speical Non Abrasive fabric non teraring fabric.)

Cycle Adjustable Height & Comfortable Seat with cushions to prevent back-aches & muscle stiffness. 8 adjustable Resistance Levels & Tension Controller Knob. Material - Alloy Steel. 6 Months Warranty. Size (L*B*H*)- (41*24*6) inches. Dual Action Mode - Stationary & Moving Handles Both. Full Body Workout - Arms, Calves, Chest & Back. Belt based resistance mechanism allows better, momentum-based recovery & better pedalling technique. Suitable for high-intensity Cardio Workout, Weight Loss, Fully Body workout & Strangth Training.

Pull Chari Providing designing and fixing of Pull pair of size 25X800X2000 mm fabricated with main post of 140 mm disa and 3.00 mm thick and other pipes of 40 mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00 mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc.