DCSEM/CQD/QSA/Almora Beaut/Ph-II/21- 22/NIT/06 dt.19.07.2021

Amount

Works

Description of Work / Item(s)

Amount

Works

Depth not exceeding 1.50m from ground level.

Depth exceeeding 1.5m & upto 3 m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeeding 1.5m & upto 3 m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeeding 1.5m & upto 3 m from ground level

Disposing off the surplus excavated materials by mechanical transport to the near by dumpingpits/ dumping areas inside Anushaktinagar colony including all leads, lifts, loading,unloading, stacking, spreading, levelling etc.complete as per drawings, specifications & as directed by the Engineer in charge. Note :- Voids @ 20% for soils and 50% for soft rock/hard rock shall be deducted from fully loaded truck measurements to arrive at the net quantity for payment in case direct measurement is not possible.

Providing and laying dry rubble stone hard core soling of following consolidated thickness in subbase to floor and below foundation to required levels and lines with first quality rubble, handset, well packed including providing and filling the interstices with smaller stone chips,of approvedquality supplying & finishing / blinding the surfaces with approved blinding quality murrum/stone dust including watering,consolidation etc. all complete as per specification drawings & as directed by Engineerin Charge. Note:- The smaller stones for filling interstices and murrum/stone dust shall be supplied by the contractor.

150mm consolidated thickness.

230 mm consolidated thickness.

Providing NP 2 class of following dia. RC hume pipe and laying / burrying underground including making holes inmasonry/concrete work wherever required, making good the holes after laying the hume pipe with collar joints using stiff mixture of cement mortar (1:2) and sealing open ends with wooden bush etc. all complete as per specifications & as directed by the Engineer-in-charge.

150mm dia pipes

250 mm dia pipes

500 mm dia pipes

Half round Pipe of 150 mm dia

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing,transporting, placing in position consolidation,finishing, curing etc. complete all as perspecifications, drawings & as directed by theEngineer in Charge. Note:Nominal reinforcement if provided shall be measured & paid under relevent item.

PCC of grade M-10 in foundation, mudmat course,footing of dwarf wall etc.

PCC of grade M-15 in ,sub base flooring, foundation, pedestals, cable pits, cable trenches, plinth protection,Coping etc.

Reinforced Cement Concrete of grade M-30 in foundation, plinth & superstructure for all type of Structural/ RCC elements conforming to IS 456-2000 , IS 3370 (latest) and IS 13290-2002using 20mm. maximum size down graded stone aggregate including machine mixing, conveying,placing in position, mechanical consolidation,finishing, curing etc. complete as per specifications and drawings for the following etc. complete as directed by Engineer -in-Charge. Notes for reinforced cement concrete:- a)Cement for structural works shall be OPC/PPC ISI marked and duly approved bythe Engineer-in-charge. b) PPC/blended cement of ISI marked shall only be used for finishing works on priorapproval of Engineer-in-charge. c) All RCC work shall be controlled concrete unless otherwise specified and shall be carried out strictly in accordance with the drawings and specifications. d)The rates for RCC works shall be exclusive of cost of reinforcement and form work unless otherwise mentioned. e) All coarse aggregate to be of 20mm.maximum size & uniformly graded unless otherwise mentioned. f)Test for Concrete shall be done as per IS 456-2000 and the cost of the same shall be borne by the contractor.

For all type of structural / RCC elements with all geometrical shapes.

Extra for providing RMC (Ready Mixed Concrete) conforming to IS 4926 (Latest) in lieu of conventional RCC items, supplied by approved RMC manufacturers including transportation, pumping etc ,complete as per instruction of Engineer in Charge.

Reinforcement for RCC work including supplying steel bars of various diameters as required at site of work including loading, unloading, transporting, decoiling,straightening, cutting,bending placing in position and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. Note:- Cost of binding wire shall be borne by the contractor & shall not be measured for payment.

Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL , TATA STEEL, JSW and RINL only.

Providing, erecting, fixing in position striking /removing and cleaning steel / timber shuttering & centering for form work in foundation , plinth or tie beams,lift pits, cable trenches, electrical pits etc. atall locations for all geometrical shapes inplain,curved surfaces of structural / RCC elements including chamfers, splays, keys,wedges, props, rails, bracings, brackets,cutting holes for pipes etc., providing & applying approved form oil on all surfaces ofform work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. complete as per specifications drawings and as directed by the Engineer-in-charge. Notes :- a) Area of form work in contact with concrete shall only be measured for payment & stop boards for construction joints etc. will not be measured for payment. b) The rate for formwork shall include all type of structural/ RCC elements and all geometrical shapes including circular and any other curved surfaces. c) For double/ multi stage shuttering design calculations and details / drawings for scaffolding shall be submitted by the contractor well inadvance. Prior written approval of form work shall be obtained from Engineer in Charge, before commencement of work. d) Nothing Extra Shall be entertained for revision in drawings.

Providing ,erecting fixing centering Shuttering work using ply board to obtainform finished concrete surfaces of F3 finish to ceilings at all heights & locations for following including single / multiple staging atall floors and locations for all geometrical shapes in plane , curved surfaces of structural / R C C elements including chamfers splays, keys, wedges, props, rails,bracings, brackets, cutting hole for pipes etc.providing and applying approved form oil to all surfaces of form work coming in contact with concrete and skirting / removal of thesame including finishing by filling form -tie- holes , removal of fins , ridges, and irregularities by grinding filling air holes, with sack rubbed finish cleaning up loose and adhering debris including all materials labour etc. Complete as per specifications drawings and directed by Engineer-in-charge.

At all floors and locations including single/multiple staging

Providing random rubble masonry with rough dressed hard stone below plinth in foundation, plinth, retaining wall, tree guards, sitting etc. in cement mortar 1:6 including through stone, header stone, bondstone, quoins etc. well packed including filling the interstices with smaller stone chips, striking,raking out joints & finishing the joints, including scaffolding, curing etc. all complete as per specifications, drawings and as directed by the Engineer in Charge.

Cement pointing to random rubble masonry wall with cement mortar1:3 including raking out joints, pointing neatly and finishing the joints , curing scaffolding etc. complete all as per specification, drawing and as directed bythe Engineer in charge.

Raised and cut pointing

Sunken or recessed Pointing

Brick masonry work in foundation ,brick sitting,bench, stool (curvied or any geometrical shape) ,plinth,cable pits,trench, steps, storm water drain, footpath etc. at all locations using well burnt bricks from approved lot,of class designation 3.5 (classification as per IS1077-1992 and min. average compression strength not less than 3.5 N/mm2 ) in C.M 1: 6 to correct line, level and plumb including raking out joints / simultaneous flush pointing with cement mortar 1:4, curing etc.complete asper specifications, drawings and as directed by Engineer in charge. Notes for brick masonry:- i) The rate shall include cost of making the brick masonry to all geometrical shapes and sizes without any extra cost to the Department. ii)The contractor shall get approved the samples of bricks from the Engineer-In- Charge before procurementon large scale and shall maintain the same for the entire work iii) Necessary openings, nitches, cut-outs, wherever required as per drawings and asked for by the Engineer-In-Charge, shall be provided by the contractor without any extra cost.

Providing brick work 115mm thick in partition walls, dwarf walls, parapets, under platforms,curtain walls, fins,external boxing etc. at allfloors and locations as per drawing using wellburnt bricks from approved lots of class designation 3.5 (classification as per IS1077-1992 and min. average compressive strength not less than 3.50 N/mm2) in C.M 1:4to correct line, level & plumb including scaffolding, raking out joints, curing etc.complete as per specifications drawings & asdirected by the Engineer in charge.

i)with 115mm.wide and 80mm. thick RCC(1:2:4) stiffeners at every one metre height including formwork but excluding the cost of steel reinforcement, which shall be paid under relevant item. ii)Without RCC stiffeners for support walls,nitches etc.

Sand faced external/ internal cement plaster as specified below in Ready MIx Mortar 1:4 using RMM at all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line,level and plumb, curing including making grooves, vatas, plaster fluting (plaster in steps) etc. where ever required complete as per specification and drawings and as directed by the Engineer in Charge.

20 mm thick in two coats for brick/concrete surfaces (external / internal) (backcoat and finishing coat of 10 mm. thick each)with water proofing agent @ 2% by weight of cement.

12 mm thick in single coat smooth plaster finish for independent concrete/brick surfaces

15 mm thick plaster

10-50 mm varying thickness of plaster giving thatched finish/other approved finish over concrete/brick surface

Extra over plastering items for making and finishing in matching plaster finish grooves of various sizes as per drawing , in plaster, at all locations to proper line, leveland plumb all as per specifications , drawing & as directed by EIC

Making various moulds / bands (projections from plaster) of sizes upto 100 mm wide and 20/25mm thick in curve/square shapes around circular/rectangular columns in C.M. 1:3 as specified below, in proper line, level, shape and design as shown in the drawings and as directed by the Engineer-in-Charge. Note : The cost of GI wire mesh used here will be paid under relevent item seperately.

Painting plastered / concrete surfaces with two coats of exterior grade acrylic emulsion paint of approved colour and shade over a coat ofapproved cement primer including all as per manufacturer'srecommendations and as per the approvedsample including providing necessaryscaffolding,cleaning the surface with water toremove all coating, dust, filling up cracks &crevices with approved putty, curing thesurface etc. complete as per specifications and as directed by Engineer in Charge

Painting over the existing/old structural steel frame, cover ,fencing etc. with two coats of synthetic enamel paint of approved make and colour over a coat of approved steel primer etc complete as per specification, drawings and as directed by EIC

Providing and applying synthetic plaster finish paint "Renovo/Durashield/RUF & TUF of Sherwin Williams[BJN Paints]/ Chemtex or approved equivalent paint over plastered surface by applying one coat of approved coat of ASP as per manufacturers specification by trowel and applying Two coats finish of approved colour and shade on specified locations internal /external surface in plane, curved / any geometric shape as recommended by approved manufacturer, to perfect line, level, plumb including finishing with sharp edge at corners, nitches etc.all as per manufacturer's recommendations and specification or as directed by EIC, including all labour materials, scaffolding, double height staging, if required & surface preparation etc. all complete at all heights, leads, location and lifts as specified in drawing and as directed by the EIC. Note:- Finished surface area shall be measured for payment.

Synthetic plaster of approved single colour, shade & texture

Brick patttern/wooden texture design/multidesign or any approved design over exposed plaster surface

Providing & applying textured finish paint of M/s Asian paint/Burger/nerolac/heritage or approved equivalnt over MS structural work/steel pipes/Concrete Surfaces finished with stucco spray finish in Grey colour/Granite stone/wooden trunk finish Texture plaster finish or any other approved finish applied over putty over a coat of anticorrosion paint including all labour materials, scaffolding, double height staging, if required & surface preparation etc. all complete at all heights, leads, location and lifts etc complete as per specification, drawing & as directed by EIC

Providing & laying machine cut & machine mirror polished kotah stone on sitting steps,facia,tree guard top,flooring,steps, riser etc including necessary cement morta rbedding / backing, close jointed & grouted with matching cement slurry and finished to line, level, curing etc. as required, including cutting of stone slab, wastage, making cutouts,wherever required etc. complete all as per specifications, drawings and as directed by the Engineer in charge.a) On sitting steps,tree guard ,steps etc of required length ,shape and 25mm thick laid over & including 20mm. thick cement mortar 1:4 ( I cement : 4coarse sand) bedding. b) In Facia,Riser,skirting, including 20 mm thick or sizes as per working drawing laid over and including 12mm thick cement mortar 1:3 ( I cement : 3coarse sand) backing including providing grooves if necessary chasing the brick masonry etc.complete.

Providing, laying and fixing in position at all floors and levels machine cut, machine polished natural granite stone of approved colour of 18mm thick granite stones of approved quality and of Black/Red Multicolour/White or any other approved shade for flooring, skirting, cladding, treads , risers, tree guard top etc. on brick/ concrete surface etc., with polished granite stone of required sizes fixed with MYK Latricrete-335 multipurpose adhesive or equivalent over the necessary mortar bedding/ backing coat, close jointed and grouted with matching cement slurry mixed mixed with suitable pigments including fixing approved stainless steel cramps / pins at suitable intervals and approved adhesive such as araldite to ensure fixing of stone securely including making necessary recess in the granite to accommodate the hold cramps / pins and approved quality adhesives to ensure the fixing of stone securely grouting the joints with approved pigments,curing, cleaning ,rounding of edges, wastage and final hand polishing etc. complete all as per specifications, drawings and as directed by Engineer in Charge.

Providing ,laying and fixing in position at all floors and levels dressed chiselled natural LIME STONE of approved colour, quality and shade for sitting / flooring, skirting, cladding, treads , risers, on brick/ concrete surface etc., including necessary mortar bedding/ backing coat, close jointed and grouted with matching cement slurry mixed mixed with suitable pigments including approved adhesive such as MYK Laticrete 335- Multipurpose adhersive and fixing with approved stainless steel cramps / pins at suitable intervals to ensure fixing of stone securely ,curing, cleaning and including rounding the (edges in semicircle) exposed edges,wastage ,final hand polishing, applying waterbased protective coating over the stone etc. complete all as per specifications, drawings and as directed by Engineer in Charge.

18 mm thick dressed chilselled natural LIME STONE of Black/Grey or any other approved shade, in all geometric shapes and sizes as per pattern, drawings, quality & pattern fixed with M/s MYK Latricrete-335 multipurpsed adhesive over 1:3 C:M bedding.

Providing, laying and fixing in position 20 mm thick machine cut, Factory Dressed natural SAND STONE in required sizes, shade, shape and pattern in plain/curved or any geometric shape of approved quality & colour in in flooring/skirting /cladding, tree guard at all location fixed with MYK Laticrete 335- Multipurpose adhersive or equivalent over 12 mm thick cement mortar backing of mix 1:3 (1 cement : 3 coarse sand) including providing and fixing with required stainless steel pins / clamps / dowels,drilling holes, making notches etc. for securely fixing with cram / pins to wall including grey cement slurry/paste and grouting the joints matching colour including rounding the (edges in semicircle) exposed edges, wastage ,polishing all exposed faces etc.complete.as per specifications and drawings and directed by Engineer-in-charge.

20 mm thick machine cut, Factory Dressed natural SAND STONE in combination of sizes (in mm) 300 x 150 / 150 x 150 / 200 x 150 or as per approved size, shade, shape and pattern over cladding.

Structural steel work in frames, covers, using angles, tees, flats, bars , chequered plates,inserts fabricated out of mild steel bars, ISMC,ISMB, ,angles, pipes , plates and diaphram plates for expansion joints etc. of all shapes, sizes including supplying, cutting,fabricating, welding, erecting, making holes/chases wherever required and fixing/embedding in position in concrete/brick workwith necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding including painting two coatsof anticorrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour onall exposed surfaces over a coat of approved steel primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.

Structural steel works for other Miscellanous works-MS grating, pergola,monkey ladder etc.

Designing,fabricating (Laser Cutting), Erecting & fixing Metal Art work of approved designmade out of 300mm wide x 8mm thick M.S sheet built up section connected by 75mm x8mm M.s Flat fabricated & bent shape. The height of the metal art is 1200mm. The art work is consisting of 4 differnet units, finally articulated and connected each one as per the approved image and fixed ove RCC pedesatal ( As per structural detail) .RCC pedestal shall be provided with 400mmx400mmx10mm M.s plate embeded in concrete with suitable lugs. The entire assembly is painted with black matt finish or approved finish over a coat of anti corrosive paint of zinc chromate primer.The rate shall include one coat of zinc rich primer after properly cleaning the steel surface with wire brush and mild acid solution followed by washing with water and drying the surface completely. The rate shall be also inclusive of suppying, cutting, welding gas cutting wastages and staging for erecting etc complete as per specfication, drawings & as directed by EIC

Providing composite feature tree branch climbing system as per approved details in combination of RCC-M-30 grade concrete and plaster in C:M 1:4 and casting RCC column in semicircular shape of dia 400mm over the existing stone pitching up to pitching height & projection of 450mm beyond pitching in circular shape of dia 450mm for the portion projected beyond the pitching (minimum projection shall be 450mm.) for mural tree climbing system to the required profile, shape & size as per the detailing. Main central RCC column of 400mm dia to be casted over the existing pitching at center in half round & circular for the projection of 450mm beyond the pitching.All including shuttering, plastering work with GI mesh in CM. 1:4 with minimum thickness of 15mm to 50mm to get the required profile and shape & size of tree branch climbing system . All the main & subbranches of specified size and shape shall be casted to the given profile as per drawings & all as per the direction of EIC.

Note : 1.The plastered surface shall be finished with textured tree bark finish and painting with approved tree shade & color. 2.Reinforcement &Textured finished will be measured & paid under relevant item.

Supplying & fixing 1000 mm high G.I Pipe railing consisting of "B" class(medicum duty) 50 mm dia N.B G.I pipe top runner weldeed to 32 mm dia N.B medium grade pipe verticals ( with additional 100 mm for embedding in concrete) at 150 mm centre to centre or at suitable distance as shown in drawing with suitable hold fasts and concrete/ mortar,including painting with two coats of synthetic enamel paint of bamboo finish or of approved make and colour over a coat of approved primer after applying 'etch' primer etc. complete all as per drawingand as directed by the Engineer in Charge.

Providing & fixing stainless steel pipe hand rail at Staircase& lobby, all floors & levels conforming to 310 Grade of steel,of Schedule 10-S , having 1000mm heightapproximately.Pattern is 50 & 25 mm dia.NB Pipe inhorizantal,40mm dia NB pipe in verticle. All as per pattern &design shown in drawing including necessary S.S bend,tees, welding / nut-bolt necessary anchoring polishing and fixing in concrete/brick wall with S.S lugs, making pockets,concreting, making good the surfaces etc. as per specifications drawings and as directed by the E-I-C.

Supplying following dia DWC HDPE pipe with HDPE fittings and fixtures, fixing the pipe with solvent /welded joints for antisyphonage or drainage of waste waterfrom Sanitaryware,Lab.Sinks etc. laying the pipe line onexposed surfaces or in concealed as shown in the drawingor as directed by the Engineer-in-Charge, cutting holes orchases in RCC or brickwork structures, making good thesurface to the original condition all complete as specified or as directed by the E-I-C.

DWC HDPE pipe of 200 mm dia

Providing & fixing in position following size Weep holes wherever required in RCC /Masonry walls including cutting to requiredshape & size all as per specifications,drawings & as directed by the Engineer incharge all complete.

75 mm dia PVC pipes

Providing & fixing pebble of approved sizes ,shape, shade and as per approved pattern fixed with M/s MYK laticrete-335 multipurpose adhesive/M/s fosroc or equivalent on concrete/plaster/tile surface etc including necessary cement mortar bedding etc complete all as per design, drawing, spection and as directed by EIC

Unpolished pebble of 40*20mm or of approved sizes

Polished pebble of 40*20 mm or of approved sizes

Providing and laying stone pitching 230mm thick using spotless stones includingpreparation of surfaces, cutting, levelingand dressing the undulations, setting thestones to proper slopes etc. including grouting the joints in stone pitching with CM 1:3 and pointing the surface with same mortar, fixing weep holes(to be paid separately under relevant item), placing projected stones for foot hold whereve required etc. completeall as per specifications, drawings and as directed by EIC.

Providing, laying & fixing precast cobble textured paver blocks of 60 mm thick with combination of white+black+gray as per approved size & design of M/s VITCO laid over a layer of 50 mm thick Sand / Stone dust bedding over well consoildited sub-base including close jointed & grouted with matching cement slurry and finished to line,level etc.transporting to site, placing to proper line & level etc including cost all material , labours, tools etc complete as per specficification drawing as directed by E-I-C

60 mm thick cobble textured pavers of M/s.VITCO or of approved equivalent with white+black+gray combination or of approved colour laid as per above description or as per manfacturers specification as per EIC.

Providing, laying & fixing precast Grass Paver Tile of approved design and of make M/s. Super Tile or approved equivalent, laid over a layer of 50 mm thick stone dust mixed with red murum over well consoildited sub-base including filling the joints with redmurrum etc.transporting to site, placing to proper line & level etc including cost all material , labours, tools wastage etc complete as per specficification drawing as directed by E-I-C

60 mm thick Grass Paver Tile of approved size,design and colour etc.

Providing, laying & fixing precast Accupressue block of 60 mm thick Triangular Pointed / as per approved Shape, size , design & colour combination of M/s CONCRETO or as per approved manufacturer, laid over a layer of 20 mm thick CM 1:4 bedding over well consoildited sub-base including filling the joints with CM etc.transporting to site, placing to proper line & level etc including cost all material , labours, tools wastage etc complete as per specficification drawing as directed by E-I-C

400mm x 400 mm or Size as per approved manufacturer, Accupressue block of 60 mm thick Triangular Pointed / as per approved Shape, for accupressure Garden & internal walk way of Bhabha pebble art.

Designing & finishing by stamping the wet concrete surface of approved shape, shade & design with stamping tools, cleaning the surface with water jet, Cutting of joint at every 3 meters, sprinkling of colour hardener at the rate of 2.7 kg per sq.mtr, Floating the surface with different types of floaters, application of release agent at the rate of 0.5 kg./sq.m , and application of acrylic based sealer in 2 coats for finishing etc. complete all as per specification, drawing & as directed by EIC (Note : Cost of under layer concrete mix shall be paid seperately.)

Providing and fixing precast Bull nose Kerb stones of 125 x 450 x 600 mm of M/s super tiles including necessary form work, consolidation,finishing, curing, fixing with CM 1:3, jointing and pointing in CM 1:3 etc complete as per specification, drawings and as directed by Engineer-in-charge.

Designing, fabricating, providing & fixing Pebble stone art of aproved design of approx size 1200 mm x 900 mm including all the fixing arrangment, labour, material etc. complete all as per specfication,drawings & as directed by EIC. Note :- Pebble colour sizes (Various from 40mm to 10mm) and shape shall be as per the approved design. All pebbles shall be natural and polished. Pebbles shall be fixed with M/s MYK laticrete-335 multipurpose adhesive/M/s fosroc or equivalent on concrete/plaster/tile surface etc.

Designing, fabricating, providing & fixing Pebble stone art of Homi Bhaba portait of approved design of approx size 1200 mm x 900 mm including all the fixing arrangment, labour, material etc. complete as per specfication,drawings & as directed by EIC

Providing & fixing GI plastering mesh of M/s Arpita or equivalent of 22 guage & 12mm mesh size , with necessary "U" hooks, clips ornails at all floors and levels, whereverrequired to prevent development of cracks inplaster surfaces, as per specifications,drawings and as directed by the Engineer in charge (Only area of chicken mesh provided shall be measured for payment)

Re-arrangment and reorganising the existing rock pieses around the existing trees in a artistic way for tree guard by mechanical/manual means including, lifts, loading, unloading,stacking, levelling, spreading, arranging in a systamatic way etc complete as per drawings & as directed by EIC

Designing, providing, applying Artistic paint work using approved acrylic paints of approved picture of pet animals ,natures etc of approx size of 900 mm x 1200 mm over the existing rocks including all as per manufacturer's recommendations and as per the approved sample including providing necessary scaffolding,cleaning the surface with water to remove all coating, dust, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications , drawings and as directed by Engineer in Charge

Dismantling existing brick works/ PCC/ RR Masonryworks/kerb stone etc. by chiselling at all floors and levelsincluding scaffolding, stacking of serviceablematerials and disposing of unserviceablematerials with in lead of 500m & all as perspecifications & as directed by the Engineer in Charge.

Supplying and fixing in position G.I. chain link fencing 8 guage mesh of size 50 mm x 50 mm to the existing post including blots, nuts, washers, and 6 mm dia GI J hooks and 6mm dia fixing rods, including cost of materials, labour, scaffolding and painting with two coats of synthetic enamel paint of approved make & shade over a coat of approved metal primer along with existing post etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing, fixing & Positioning 75mm thick granite stone bench of approved shape & design with back rest size 2000 (L) X 450 (B) X 770 (H) mm in line & Level including foundation work etc. all complete as per specification, drawings & as directed by Engineer-In-Charge.

Supplying, staking and spreading good quality red garden soil of approved lot free from stones, pebbles, etc. required for plants, lawn etc. at the site including all leads, mechanical trasportation etc. completed as directed by Engineer-in-charge Note :- Measurement will be as per truck body dimensions without any deduction of any voids.

Ramesh And Associates

Balaji Infraprojects

Shree Enterprises

Sai Sales Corporation

Renjin Construction

MARUTI ENTERPRISES

Ramesh And Associates

Balaji Infraprojects

Shree Enterprises

Sai Sales Corporation

Renjin Construction

MARUTI ENTERPRISES