84784ADDN / ALTN AND SPECIAL REPAIR OF OFFRS MD ACCN AT GURUDWARA ROAD COLONY PUNE.

Amount

Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in Kitchen platform, shelfs etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregates) as in sub base, levelling course etc complete all as specified and directed.

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.36 sqm but n.exc 0.42 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.36 sqm but n.exc 0.42 sqm as in Skirting /dado, set & jointed in neat cement slurry & pointed in coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 600 mm x 300 mm x 7 mm / 450 mm x 300 mm x 7 mm / 450 mm x 350 mm x 7 mm joint free thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified and directed.

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete. all as specified and directed.

Rounding to edges of stone slabs one edges such as in steps, working platform and other similar situations.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

M&L for Anti termite treatment of soil under existing floors using Chloropyriphos 2% EC emulsion at the rate 1 liter per hole, 300mm apart including drilling & plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre incl drilling and plugging holes etc in apron.to match the existing floors complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified and direceted.

M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) EWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified and directed.

S&F in repair dual flush 5&10 ltr capacity (10 lit) PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F vitreous china table top basin, thin rim round in shape of size 360x360x120mm excluding taps but including necessary brackets, CP brass wastes coupling and other fittings all as specified and directed. Make: Jaquar Cat No.SLS-WHT-6905 or equivalent in list of makes as approved by GE.

S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified. Make: Jaquar Cat No.VGP-81021N or equivalent in list of makes as approved by GE.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified.

S&F in repair cabinet mirror, plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and directed. Make :- Prayag, polytuff, Jaquar

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repair stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; including bedding in cement mortar on to dwarf wall connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as specified and directed

S&F in repair stainless steel plate rack of size 787mm X 914mm X 254 mm all as specified and directed . CAT PART NO:- P-348 of Pryag or equivalent in list of makes as approved by GE.

S&F in repairs hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat No ALE-ESS-585 or equivalent in list of makes as approved by GE.

S&F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or equivalent in list of makes as approved by GE.

S&F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or equivalent in list of makes as approved by GE.

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or equivalent in list of makes as approved by GE.

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or equivalent in list of makes as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or equivalent in list of makes as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or equivalent in list of makes as approved by GE.

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or equivalent in list of makes as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or equivalent in list of makes as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or equivalent in list of makes as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent in list of makes as approved by GE.

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified..

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..

S&F PVC (SWR) vent cowl of size 110mm bore.

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm thick including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section or equivalent in list of makes as approved by GE with provision for exhaust fan complete all as specified and directed.

S&F aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc and provision of opening for AC duct complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as approved by GE complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

Taking down old shutter of size exc. 1.5 sq. m but n exc 4 sqm each complete and refixing again in same opening complete all as specified and directed by Engineer-in-Charge.

S&F factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement and as directed.

S&F factory made 100 % solid wood plastic composite (WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Moulded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed.

M/L for two coats of synthetic enamel paint over and including a coat of pink primer on new wooden surface including preparation of surfaces complete all as specified and directed.

S&F factory made fully glazed/wire gauge (single piece both side) PVC prelam door shutter 33-35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19mm (19 gauge) for top and bottom rails and in styles. Single piece plain coloured PVC sheets 5mm thick to be used to cover styles and rails. For edges plain coloured PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles, top rail, lock rail and bottom rail on either side and as gap insert with PVC board 22mm to 25mm solid core board for styles and rails. Panel will be of wire gauges of stainless steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18 mm and wire cloth shall be covered with aluminum XPM in rhombus shape, in one piece from top rail to bottom rail, fixed with self tapping chromium plated screws not less than 50mm long complete all as specified and directed.

S&F in repair Stainless steel wire cloth ISI marked, 0.56 mm nominal dia of wire & average width of aperture 1.18 mm & fixed with alluminium wire staples all as specified & directed.

S&F Stainless steel butt hinges medium weight 100mm ISI marked all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

S&F Stainless steel Hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws ISI marked all as specifed and directed by Engr-in-Charge

S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed.

S&F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make :- Century, Kitply, Green ply

S & F Continuous (piano) hinges, stainless steel, ISI marked Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:4 including water proofing compond (WPC) on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement and applying two coats of exterior acrylic emulsion paint over a coat of primer on new surface including taking down existing plaster all as specified. Note: WPC will be measure and paid separately

M&L for 5 mm thick rendering or plastering in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc including water proofing compound (WPC) , including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement, and applying two coats of OBD of any tint over and including a coat of primer and 3mm thick wall care putty all as specified and directed including taking down existing plaster.

Supply only Integral Water proofing compound. Ratio of WPC with CM shall be as per Manufacturer instruction.

M&L for complete removal of existing treatment from internal walls surfaces by "electrically operated dry wall sanding machine " making the surfaces smooth by removing undulation (nails, screws if any to be removed properly before sending) and prepair the surface to receive new finish complete all as specified and directed.

M&L for 2 to 3 mm thick birla / JK or similar type of interior wall putty to wall surfaces by using "electrically operated airless wall putty spray machine" smoothen the surfaces using sand paper etc (Note: cracks of wall to be filled with its crack fill past make buger or equivalent) complete all as specified and as directed.

M&L for applying one coat of H S seat-O-prime XP advanced acrylic primer make Berger or equivalent over putty surfaces using electrically operated spray machine and applying two coats of acrylic emulsion paint over primered surfaces of wall using electricaly operated spray machine complete all as specified and as directed.

M&L for complete removal of existing treatment from ceiling surfaces by "electrically operated dry wall sanding machine " making the surfaces smooth by removing undulation (nails, screws if any to be removed properly before sending) prepare the surfaces and applying two coats of acrylic emulsion paint over primered surfaces of ceiling using electricaly operated spray machine complete all as specified and as directed.

S&F in repair Drapery curtain rod of Stainless steel 25mm dia covered with PVC coating complete with SS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw compete all as specified.

M&L for water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Note : The quated rate shall be deemed to be included all the above treatment and cost of materials required for the treatment complete.

Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) averaging 50 mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :- (a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through their authorised applicator only.

Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all as directed.

Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

All as per serial item No.85.00 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres

S&F rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S&F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm bore brass stop cock etc.complete all as specified and as directed.

S&F rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S&F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm bore brass stop cock etc.complete all as specified and as directed.

M&L for textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) including demolition of existing tiles complete, all as specified.

M&L for 75 mm thick, PCC (1:5:10), type E-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

Demolition of cement concrete in any position, sunken portion etc un-reinforced not therwise specifically provided for complete all as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposing the debris off the defence premises complete all as specified

S&F rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

M/L for applying two coats of synthetic enamel paint over and including a coat of red oxide chrome primer on newly steel surface including preparation of steel surfaces complete all as specified and directed.

M&L for cement concrete (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement and joints to be made per 2 Sqm and filled with bitumen, including demolition of existing cement concrete all as specified and directed

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

M & L for preparation of external surfaces of walls and appying crack filler in the cracks and then two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , Make :CEMISTIK PU 50 heavy Duty watererproofing coating or equivalent in list of makes as approved by GE complete all as per manufacturer instruction as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in hard/dense soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm , watering and removing surplus soil to a distance n exc 50 m and making good surfaces complete all as specified and directed.

M&L for cement concrete (1:2:4), type B1, (using 20mm graded crushed stone aggregates) as in post holes complete all as specified and directed.

S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Including making holes into angles for fixing wire mesh confirming to FE - 410 W(Gde E-250) Quality B complete all as specified

Supply only PVC coated Chain link MS galvanised fencing, 4mm thick 100 x 100mm wire mesh or type weighing n exc 4 kg/sqm conforming to IS:2712, galvanised coating of type heavy as laid down in IS 4826 ,make as approved by GE complete all as specified.

Fixing only PVC coated Mild Steel Galvanised chain link fencing 100 x 100 wire mesh ,including fixing to any type of standards, rail, straining bolts etc including provision of binding wire as approved GE,complete all as specified.

S&F MS Flat for post and struts in fencing including cuttings tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc conforming to Fe 290-O Gde E-165 all as specified and as directed.

S&F Mild steel round bars 10 mm dia and over, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. (Fe-410) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length exceeding 5cm but not exceeding 10 cm & dia of neck 5 to 10 mm complete all as specified all as specified and directed

Dismantling fencing wire mesh any size and description complete all as directed.

S&F in repairs Brass chromium plated bottle traps 32 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in walls etc with Metal flush box of suitable module, with earth dolly, covered with modular plexy glass gold cover plate & frame for modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed for the following

(a) One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

(b) One ceiling fan point controlled by one, one way switch 6 Amps and regulator

(c) One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

(d) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

(e) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

(f) One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed

All as per item No. 109 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed

All as per item No. 109 here-in before here-in before but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed

M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with PVC surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed for the following

(a) One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

(b) One ceiling fan point controlled by one, one way switch 6 Amps and regulator

(c) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

(d) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

Note for Item Ser No 103 to 112 "Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures shall be provided by the contractor without any extra cost to the department and rate is deemed to be included in the unit rate quoted.”

S&F Modular Switch - 10AX 1 Way switch one module complete all as specified and as directed. Make Havells Cat No AHCSXXG101 or equivalent in list of makes as approved by GE.

S&F Modular Switch -10AX 2 Way switch one module complete all as specified and as directed.. Make Havells Cat No AHCSXXG102 or equivalent in list of makes as approved by GE.

S&F Modular Bell push - 10A Bell push switch one module complete all as specified and as directed Make Havells Cat No AHCSBIG100 or equivalent in list of makes as approved by GE.

S&F Modular Switch - 16AX 1 Way switch with indicator one module complete all as specified and as directed. Make Havells Cat No AHCSXIG161 or equivalent in list of makes as approved by GE.

S&F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module Shuttered type complete all as specified and as directed. Make Havells Cat No AHLKPWG065 or equivalent in list of makes as approved by GE..

S&F Modular socket outlet multipurpose, 6/16 Amps shuttered type, 2 module complete all as specified and as directed. Make Havells Cat No AHLKCXG133 or equivalent in list of makes as approved by GE.

S&F Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

S&F modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed. Make Havells Cat No AHLRFHG005 or equivalent in list of makes as approved by GE..

S&F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 151 complete all as specified and as directed.

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make Anchor Cat No 39935 or equivalent in list of makes as approved by GE.

Supply only Highly efficient LED Bulbs, 10 W, White/ warm white used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed

Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 20 Watt LED lamp including lamp complete all as specified and as directed “ Make Lucker Model Boxy Eco4 or equivalent in list of makes as approved by GE..

Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.

Supply and fixing 10 Watt , White/ warm white LED High quality aluminium extruded fitting with intregrated electronic driver, connector block, holder, decorative end caps, Philips Cat No 31402, LED Picture light complete with all accessories prewired and necessary mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Philips Cat No 31402 or equivalent in list of makes as approved by GE.

Supply and fixing LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make Jaquar Cat No LPCRSRT 36WXC or equivalent in list of makes as approved by GE.. Note :- (i) GI medium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated. (ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting

Supply and fixing ceiling/ wall surface mounted square panel with aluminium die cast housing Nero Surface (Square) 12 watt fitting including lamp complete all as specified & as directed Make- Jaquar Cat No-LNRO02S012SW or equivalent in list of makes as approved by GE..

Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No KCH-CHR-MB160275541A or equivalent in list of makes as approved by GE..

Supply and fixing wall mounted fan, energy efficient BLDC Motor, Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed.

Supply and fix exhaust fan PVC body, AC single Phase, working on input voltage 140-285 , of size 250mm sweep, 1300 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .

Supply and fix exhaust fan PVC body, AC single Phase, working on input voltage 140-285 , of size 200mm sweep, 1600 RPM, Power 16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .

Supply and fixing ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, incl of remote canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan and by passing regulator complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),

Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.

Supply and fix electric water heater, storage type shock proof with SS Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, digitial temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, ELCB shock safe safety plug connected with 3 core cable of suitable size / length, hot and cold water pipe connections not less than 45 Cms as recommended by manufacturer including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Make- Glen WH-7055SQWH25LD, Bajaj Model Calenta Digi , Havells Model- Monza Digi (GHWAMJSWH025) Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department.

M & L for PVC connection pipe (copper) chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete as all specified and directed.

S & F Distribution Board sheet metal enclosure double door TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections including taking out existing unserviceable DB of any size and capacity along with MCBs complete all as specified and as directed.

Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the complete with connection testing and commissioning complete all as specified and as directed including taking down old existing MCBs.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed including taking down old existing MCBs.

Refixing only old serviceable MCB SP /SPN obtained from Item No 154 and 155 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 25 Amps Motor starter complete all as specified and as directed. Make Havells cat No- AHCSMXB251 or equivalent in list of makes as approved by GE..

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including on surface PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures compleate all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one RM of length).

S & F sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sqmm nominal area and drawn through an including PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire, all as per IS 694/1990 drawn through including on surface PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures compleate all as specified and as directed. Note :- ( Four runs of main copper wire, two run of earth wire cable & PVC conduit shall be measured together as one RM of length).

Design, manufacture, supplying, installing in correct aligned position, making proper connections, testing and commissioning of LV panels (for metre board ) suitable for 415V, 3 phases, 4 wire, 50 Hz power distribution system, indoor type, IP-42 rating free standing, floor/wall mounting, sheet metal clad, cubicle, dust and vermin proof type compartmentalized design, fabricated out of 16 SWG CRCA sheet steel, complete with copper bus bars, separate earth bus bar to be provided through out the length of the panel with incoming and outgoing feeders accommodated in a modular multitier arrangement and interlocked to avoid paralleling, adequate size cable alley, painting, earthing, numbering including danger plate etc as required as per specifications and drawings and comprising and including the following items complete all as specified and as directed.

Incoming: (i) 160 A FP MCCB 25 KA ( Make L&T Cat No CM90634OOMO) - 01 No Metering & Indication: (ii) VAF + PF meter with RS485, Cl 1 - one (1) No (Make L&T Cat No- WL411011OOOO or equivalent in list of makes as approved by GE.) one (1) set of RYB phase indication lamps with 2 A backup MCB (iii) Busbar: 200 A 4 strip Copper busbar insulated with heat shrinkable sleeves and shall be colour coded Outgoings: (iv) One (01) No. 32 A SPN MCB 10 KA (v) Four (04) Nos. 40 Amps TPN MCB 10 KA Digital Electronic KWH Meter: (i) Energy meter 1P 5-40A Cl 1 DIN -01 No Make L& T Cat No- WD4000101OOO or equivalent in list of makes as approved by GE. (ii) Energy meter 3P 10-60A Cl 1 DIN - 04 Nos Make L&T Cat No- WD4000103OOO or equivalent in list of makes as approved by GE. Note:- (a) 4 Nos meter compartments for three phase meter & 01 No compartments for single phase meter shall be provided with the acrylic sheet window complete with locking arrangement but without locks as required. (b) Meter board shall be got approved from Garrission Engineer along with drawing before installation. (c) Removing of old energy meter from unsv panel boards after disconnecting and depositing to MES store Yard shall be done by the contractor without any extra cost from the department (d) Earth work, Cement Concrete 1:3:6 (40mm crushed stone graded aggregate) as in Foundation for grouting of LT panel and finishing the surface with extra foam work shall be provided by the contractor without any extra cost to the department and rate is deemed to be included in the unit rate quoted

M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250 micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive (Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalent in True power earthings / Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Earth pit PVC ( Square) cover Copper strip 20x3 mm and 40 mm dia protection pipe up to 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Supply and fixing USB Charger 3000 mA 1 module type complete all as specified and as directed. Make Legrand cat No 677489 or Equivalent in Havells Cat No AHLKGXW002 or equivalent in list of makes as approved by GE.

Supply and fixing TV Coaxial socket and connector 1 module Make Legrand cat No 6774 60 or Equivalent in Havells Cat No AHLKTOG001 or equivalent in list of makes as approved by GE.

S & F PVC rigid non-metallic conduit ISI marked of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed

S & F PVC rigid non-metallic conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed.

Supply and fixing 3 Watt aluminum black and metallic nickel combination bed side light warm white standard fitting complete all as specified and as directed. Make Philips Cat No 48042 or equivalent in list of makes as approved by GE.

SBS Enterprises

Mukund Engineers and Contractors

M/s Kirti Enterprises

Veekay Enterprises

Suma Construction

M/s.BAJRANG CONSTRUCTION

SAGAR ENTERPRISES

Garima Construction Co