Replacement of old floor tiles with new floor tiles and renovation of Officers Rest

Amount

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Providing and laying vitrified floor tiles600x600mm size premium quality, manufactured using Soluble Salt Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on existing flooring laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc., complete a) Size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching Shade complete.

By Manual Means Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal.

Earth, Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth. 0.5 to 1.0 km

Scraping (c) Cement plaster

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

Door of area 3Sqm & below:-

Window of area 3Sqm & below:-

Clerestory windows of area 3 sqm and below.

Dismantling brick work tile masonary or tile lining. (b) In cement.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

12.5 mm thick cement plaster 1:4 Back side of suit no. 2 & 3

Teak wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position.

Single Rebate (60mm x 100mm)

Double Rebate (60mm x 150mm)

Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) (a) 35mm thick

Teak wood wire gauge shutters without spring (Single Leaf) 35mm thick

Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra)(g)12mm thick commercial ply wood.

Spirit polishing two coats including a coat of wood filler on wood work

Renewing glass panes with wooden fillets wherever necessary :-- (c) Frosted glass panes weighing 8.44Kg/sqm

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 ( c ) Decorative with teak facing on both sides edges lipped with teak with laminated core (iv) 35mm thick

Dismantling Sanitary fixtures such as Eurpoean / Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

Eurpoean/Indian/Orissa W.C.,

PVC / China Ware Cistern

Wash Hand Basin / Urinal Pot

CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

Bathroom Accessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder,Seat Cover, Jet Pressure and all other accessories.

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity.(without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. b) Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect iii) Size 630 mm x 450 mm x 830 mm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (iii) Size 630 mm x 450 mm x830 mm

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.

Providing & Fixing in position 15 mm i/d bibcock of approved make (to the approval of Engineer-in-charge )complete in all respect. A(i) C.P. brass Bib cock long nose/long body foam flow without flange

Providing & Fixing in position 15 mm i/d bibcock of approved make (to the approval of Engineer-in-charge) complete in all respect. A (ii) C.P. brass Bib cock foam flow without flange

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect.

Providing and fixing in position C.P brass overhead shower 1 flow with shower arm with 15 mm i/d Inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing & Fixing in position stop cock /Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.(b) C.P.brass 15mm Concealed stopcock with flange

Providing and fixing jet spray with 2'-6" long PVC pipe. a With C.P. Brass nut

Providing & Fixing in position stop cock /Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.(a) C.P.brass 15mm stop cock Male and Female end.

Providing and fixing in position C.P. brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (c) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (b) C.P brass towel ring

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass ( of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P b brass screws and washers and S/S Studs on top complete in all respect ( as required by the Engineer-in charge.) (b) Size 550mmx400mm

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass ( of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P b brass screws and washers and S/S Studs on top complete in all respect ( as required by the Engineer-in charge.) (c ) Size 1500mmx600mm or any other size

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge) fixed in to wall with C.P brass screws complete in all respects. (a) C.P brass toilet paper holder

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. a) 15mm i/d

Providing & Fixing in position C.P. Brass flange Dome of approved make (to theapproval of Engineer-in-charge ) under various fixtures complete in all respect.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Removing, fixing and cutting of existing door complete in all respect including wooden screw nails etc. complete in all respect upto satisfaction of officers in charge

RELIABLE ENGINEERS

Mohit Sahni