Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.2 L
Closing Date
24 Jul 2026, 11:00 am
Hubballi Division: Miscellaneous annual Maintenance activities for keshwapur, Bada, chota and New vinobha nagar, Vibrant colony old hospital colony.(Special Work-08).
13UBL26-27DT230626ITEM01
13UBL26-27DT230626ITEM01
Open
12 Months
Bhadradri Kothagudem, Telangana
₹0
₹4.2 L
29 Jun 2026
29 Jun 2026
10 Jul 2026
Item Breakup - B-SCH-B
"Maintenance , repair / replacement in Per each 624.00 respect of 1) Masonry works - brick work, Team/day concreting,grouting, plastering, pointing, flooring / dado work, Open drainage works, roof leakages etc. 2) Carpentry works - Wood work, doors & windows,cup boards, frames, shutters fittings & fastenings,rafters, reapers, wooden furnitures, roof sheeting etc.3) Plumbing works- Day to day maintenance and repair works in Plumbing related. By supplying multi skilled team. Each team of Multi skilled man comprises of 2 members of mason or carpenter or plumber or combination as per requirement with all Contractors tools, transportation, lead & lift,equipment's & scaffolding arrangements, safety equipment, maintenance of tools & other equipments etc. Material required for repair / replacement / other petty repair works will be supplied by the Railway at free of cost at work spot and as decided by Engineer in charge. The rate is for any one team of multi skilled members. Note: 1) Each member of team should report to SSE/Works - In charge on or before 9hrs on required working days as required by Railways 2) The Contractor should attend the maintenance, repair / replacement works with number of labour specified - one team of 2 nos for each category of work as directed by the Engineer in charge 3) A day to day register shall be maintained for this purpose and the same should be produced to the SSE/Works - In charge when ever required and produced the same for making payment 4) If any complaint / deficiency noticed in the working of the labourer, they should replaced with new person as per the direction of the Engineer in charge,. 5 ) Two times maintenance cost (per team / per day) will be imposed as penalty for the deficiency in working by the contractor's labour 6) The contractor should comply with existing laws and acts of Govt. of India and State Govt. Law and acts in engagement and working with labour 7) Mobile phone communication facility should be provided by the contractor to the each team for communication with departmental officials for instructions." Total 1378971.36
Item Breakup - D-SCH-D
of 88 mm, weighing not less than 190 gms. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 17.81 Providing and fixing floor mounted, white Each 5 18212.9 91064.5 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china 106 cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 107 18.7.1 15 mm nominal dia Pipes Metre 200 286.8 57360 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 108 18.8.1 15 mm nominal dia Pipes Metre 300 497.8 149340 109 18.8.2 20 mm nominal dia Pipes Metre 400 537.6 215040 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 110 18.9.2 20 mm nominal dia Pipes Metre 200 274.3 54860 111 18.9.3 25 mm nominal dia Pipes Metre 250 355.4 88850 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and 18.10 making good the walls etc. ( Internal work - Exposed on wall ) 112 18.10.6 50 mm dia nominal bore Metre 20 1048.35 20967 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 113 18.12.6 50 mm dia nominal bore Metre 50 762.15 38107.5 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 114 18.15.1 15 mm nominal bore Each 100 353.25 35325 Providing and fixing brass stop cock of 18.16 approved quality : 115 18.16.1 15 mm nominal bore Each 100 353.25 35325 HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 116 18.17.1 25 mm nominal bore Each 50 622.4 31120 117 18.17.4 50 mm nominal bore Each 5 1026.65 5133.25 Providing and fixing brass ferrule with C.I. 18.20 mouth cover including boring and tapping the main : 118 18.20.1 15 mm nominal bore Each 100 329.3 32930 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 119 18.21.1.1 15 mm nominal bore Each 100 85 8500 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 120 18.22.1 100 mm diameter Each 150 193.95 29092.5 121 18.22.2 150 mm diameter Each 50 222.35 11117.5 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 122 18.49.1 15 mm nominal bore Each 100 506.8 50680 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 123 18.50.1 15 mm nominal bore Each 100 820.7 82070 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 18.51 standards and weighing not less than 690 gms. 124 18.51.1 15 mm nominal bore Each 100 798.95 79895 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 125 18.52.1 15 mm nominal bore Each 100 670.45 67045 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 126 18.53.1 15mm nominal bore Each 100 574.3 57430 18.54S PTMT FITTINGS Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 100 112.8 11280 127 not less than 75 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 128 19.6.4 300 mm dia. R.C.C. pipe Metre 20 994.3 19886 129 19.6.7 600 mm dia. R.C.C. pipe Metre 20 2243.4 44868 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 3 26861.9 80585.7 130 bricks of class designation 7.5 21.0 ALUMINIUM WORK 21.1S General HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 500 495.05 247525 131 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 350 598.6 209510 132 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 100 1176.8 117680 133 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing Sqm 60 617.05 37023 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 134 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 22.22A P r o v i d i n g and applying fibre reinforced Sqm 1200 563.1 675720 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted 135 elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. Total 28182058.40
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentlatestUpdatever6.1.pdf Tender Document
ATTACHMENT
IRGCCApril2022newasperACS.pdf
ATTACHMENT
JPOCirculardated22.05.2024.pdf
ATTACHMENT
NEFTFORM.pdf
ATTACHMENT
AnnexureVGCCcorrespondence.pdf
ATTACHMENT
ACSItoXI_compressed.pdf
ATTACHMENT
BGverificationletter_compressed.pdf
ATTACHMENT
TenderDocumentlatestUpdatever6.1.pdf
ATTACHMENT
Download all tender documents and submit your bid