COMPLETION OF INCOMPLETE WORK FOR SPECIAL REPAIR TO PLASTERING FLOORING ROOF DOORS WINDOWS AND ELECTRIC POINT TO BUILDING NO 8 SM BARRACK AT RTS AND DEPOT SAHARANPUR AND PROVN OF OVER HEAD SHED ON FEEDING MANGERS AT KW CHARGE AT RTS AND DEPOT SAHARAN

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in cm 1:6 complete all as specified and directed.

M&L brick work (EXCEPT BRICKS) with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in cm 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster in walls/ceiling any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick plastering on fair faces of brick work in CM 1:4 surface finished even and fair complete all as specified and directed.

M & L 12 mm thick plastering on fair faces of brick work in CM 1:6 surface finished even and fair all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in levelling course to receive floor finishes, filling of eaves gap, sides of interlocking tiles, filling of pressed steel chowkhats, etc. complete all as specified and directed.

M&L PCC (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) as in floor etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays, with spike rolling to surfaces or making imoresson of expended metal whilest the concerete is green complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specified and directed.

M&L for kota stone slab 20-25 mm thick in skirting, etc over and including 10 mm thick rendering (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specified and directed.

BLANK

Taking down wall/ceiling boards Asbestos plywood of any thickness incluing cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sqmm and over in section in any position in unfiamed work, complete all as specified and directed.

BLANK

S&F 0.63 MM thick galvanised, courrugated mild steel sheeting with two corrugations side lap fixed with L-Type or J-Type or cranked hook bolts and washers in roof , walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 MM Plain ,galvanised mild steel sheeting, in ridges, hips, valley gutters , drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC. Make:- Everest / Armstrong / Gypsum India Ltd.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed.

M&L factory made 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L factory made 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F factory made 35mm th flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides

S&F factory made 35 mm thick IInd class HW glazed skelton shutter open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered rounded fitted with cut and mitred beads size of members of shutters as specified in SSR Part I Sec 8 clause 8.24(a) fitted to chowkhat all as specified.

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section, length of bolt 200 mm complete all as specified and directed.

S&F extruded aluminium alloy hanldes fabricated type 25 mm complete all as specified and directed.

S&F factory made steel windows with side hung shutters including frame , projecting hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutters including frame , projecting hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F MS guard bars/ grills fixed to wooden frames or welded to steel frames incl cutting, drilling & welding complete all as specified and directed.

S&F MS work as in hold fasts, bands supports, clamps, wall ties hooks incl nut and bolts etc. conforming to Fe-410-0 or Fe-310-0 including welding etc. complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in wooden/ steel frames complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in wooden/ steel frames complete all as specified and directed.

M&L 3 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each pane etc complete all as specified and directed.

S&F 300 mm aluminium alloy anodised sliding door bolt complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC Pipe (SWR) 75mm laid in floors or trenches including demolition of pipe complete all as specified and directed.

Excavation in trecnhces , n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation , etc or for shafts , wellsm cesspits, manholes ,pier holes , etc n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Returing, filling, spreading , leveling, watering & well ramming in layers n.exc 25 cm thick as in soil complete all as specified and directed.

Removing excavated soil n.exc 50 mtr and depositing as directed n.exc 1.5 mtr above the starting point complete all as specified and directed.

S&F Mild steel roof trusses (framed) trussed purlins crane gantries rails and fastenings and heavy bracket framming (Beam, tee, angle, channe or flat sections) including distance pieces cleats etc. (Grade E-250 quality A) complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, kneelers, apex stone, bed plates etc complete all as specified and directed.

M&L 6 mm thick cement,corrugated or semi-corrugated sheets in roofs, walls fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

M&L asbestos cement serrated ridge for corrugated or semi corrugated sheets fixed with L- type or J- type or cranked hook bolts complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-2 (40 mm graded aggregate) in floors, and pavings 75 mm thick finishing cement concrete surface even and smooth without using extra cement including construction joint 10 mm width and 75 mm depth complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde-E-250) quality-A complete all as specified and directed.

M&L preparing old painted wooden surface of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed.

M&L for preparing old painted steel surface of and description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed.

Complete removal of existing treatment on walls/ceiling and washing down with water etc complete all as specified and directed.

M&L Preparing surfaces plastered or unplastered new/old surfaces on walls and applying two coats of cement paint over a coat of primer complete all as specified and directed.

M&L Preparing surfaces plastered or unplastered new/old surfaces on walls/ceiling and applying one mm th Birla white wall care putty and applying two coats of oil bound distemper over a coat of alicali resistant primer complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators sub main wiring etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Taking down sub main wiring/ service cables any type complete all as spd and directed

M&L for point wiring (concealed)complete using 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor, stranded cable upto and incl working voltage 1100volts grade,make havells,finolex,or equivalent ISI marked, PVC conduit of make polycab such as bend,tee,junction boxes elbows etc incl pressed steel terminal sunken boxes of size 1.2mm covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws and unsheathed copper conductor stranded cable earth continuity wire connected to DBs/ sunken boxes/ fittings of size 1.0 Sqmm Cross sectional area and all other metal parts with earth dolly including chases cutting and making good surfaces matched with existing complete all as specified and directed.

(a) One Light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One 5 Amp socket points controlled by one switch on independent board.

(d) One 3 pin socket outlet on same board.

M&L for power point wiring (concealed)complete using 2.5 Sqmm FR PVC insulated unsheathed copper conductor, stranded cable upto and incl working voltage 1100volts grade,ISI marked, PVC conduit such as bend,tee,junction boxes elbows etc incl pressed steel terminal sunken boxes of size 1.2mm covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws and unsheathed copper conductor stranded cable earth continuity wire of size 1.5 SqmmFR PVC connected to DBs/sunken boxes/fittings and all other metal parts with earth dolly including chases cutting and making good surfaces matched with existing complete all as specified and directed.

M&L for switch flush type 15 Amps single pole one way complete all as specified and directed.

M&L Socket outlet shutter type, flush type 2 in 1, 3 Pin, 5 &15 Amp complete all as specified and directed.

M&L Switch piano Flush, single pole, one way 5 amp complete all as specified and directed.

M&L for socket outlet 5 pin, flush type 5 Amps complete all as specified and directed.

M&L for Ceiling rose in polycarbonate 3 plates flush type 6 Amps, 250 volts AC ISI marked, complete all as specified and directed.

S&F electronic fan regulator 230 volts, step type socket type, hum free 100/300 watt complete all as specified and directed.

Supply & Fixing Lamp holders PVC /polycarbonate type with back plate suitable for battern fitting/angle fitting complete all as specified and directed.

S&F LED Tube light fitting 1x18/20 Watt 1200mm T5 TL 6500K box Type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire including 01 No. 18/20 Watt LED tube rod complete all as spd and directed. Make : Syska/Havells/Philips

Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLS) cable of size 4.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 2.5 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Make of Cable- Grandlay/Havells /polycab, Make of PVC conduit - Kalinga/AKG/Polycab

M&L double door MCB Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) powder coated dust and vermin proof SPN 8 way IP 43 (double door) with 415 Volt, 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed.

M&L double door MCB Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) powder coated dust and vermin proof SPN 4 way IP 43 (double door) with 415 Volt, 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed.

S&F MCB single pole with netural 240 volts 32 to 40 Amps, 10KA complete all as specified and directed.

M&L for MCB single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.

Earthing complete with galvanised GI earth plate eletrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate n.less than 1.5mtr below normal.GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate no 5 of SSR of part-I (1991) complete all as specified and directed by Engr-in-charge.

Taking down carefully existing UNSV UG cables of any type and size complete all as spd and directed

Supply and laying cable PVC insulated aluminium multistranded sheathed 1100Volts grade XLPE insulated Armoured heavy duty of size 10 sq mm 2 core complete all as spd and directed.

M&L dry clean Sand filling in trenches around underground cables for cushioning, complete all as specified and directed. Note: Depth of sand shall be measured after punning complete all as specified and directed.

Material and labour for Brick protection with sub class ‘B’ bricks old size, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and as directed.

M&L for laying GI tubing light grade 40 mm dia with all fittings for cable protection including GI clamps nut bolts and washer etc complete all as specified and directed.

Dismantling of house service bracket of any type complete all as specified and directed.

S &F for House service bracket ( hook type ) complete with 3.0 m long GI pipe 40mm dia medium grade two no 90 degree bends MS hook and stay or guy complete all as specified and directed.

Supply and fixing 1100 volt grade heavy duty aluminium conductor cable PVC insulated served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire of size 10 sqmm 2 core multi stranded cable flat or circular complete all as specified and directed.

Taking down UNSV main switch/ MCB DBs any type and size complete all as spd and directed

Supply and fixing in repairs new generation energy saving & environment friendly 25W LED IP 66 luminaire with high power LED and connecting with copper flexible three core 23/0.0076 and all fixing accessories complete all as specified and directed.

RAM PRAKASH AND ASSOCIATES

M/s Inderlal

OM SAI ASSOCIATES AND DEVELOPERS

VERDHMAN ASSOCIATES

RAMAPATI ENGINEERING SERVICES