Providing market rate for non CSR electrical Item for Electrical Work Under Talegaon Dabhade Municipal Council

Supply and Erection of Decorative ornamental combo pole 6 meter long, Cast iron Combo Pole made out of cast iron/aluminum and MS Class material pole Bottom Section: 1.20 meter long, Made as under:- Octagonal shaped cast Iron casting at base having the following dimensionsLength 250mm, bottom diameter 170mm, Inner diameter 140mm Outer Diameter for MS grooved pipe 140mm, length 650mm long. Having a built in Junction Box with MCB and Connector Decorative aluminum ornamental pot shaped die casting length 350mm Long.Mounting base plate 250 x 250 x 12 mm, along with slots 19x40mm for foundation bolts Middle Section: 2.80 meter long, Made as under.- Spiral grooved pipe having outer diameter out of 90mm, length 2.80 meter long. Along with single decorative dotted aluminum casting ring at the center of the spiral grooved pipe inner diameter 90mm, outer diameter 110mm, height 48mm of the ring. With 1 nos of grooved aluminum embellishment casting at the top of spiral grooved pipe, inner diameter 76mm, outer diameter 155mm, length 180mm long Top Section:: 2.00 meter long, Made as under:- Made out OD 76.1 mm OD pipe 2.00 meter long Along with decorative MS sheet metal arrow shaped dome at the top of the pole. The poles surface will be cleaned to removes any oil deposits and will be sand basted, post that the pole will get 2 coats of Epoxy primer and then the Pole will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating. ( refer diagram no 1)

Supply and Erection of Decorative pole 7 meter meter long, of GI/CI/ aluminum and MS Class material pole bottom of 250-300mm and top 50-100mm with deep vertical lining/ spiral lining from bottom to top equally tapperd/conical or frustam of cone The poles surface will be cleaned to removes any oil deposits and will be sand basted, post that the pole will get 2 coats of Epoxy primer and then the Pole will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating.

Supply and Erection of Decorative pole 8 meter meter long, of GI/CI/ aluminum and MS Class material pole bottom of 250-300mm and top 50-100mm with deep vertical lining/ spiral lining from bottom to top equally tapperd/conical or frustam of cone The poles surface will be cleaned to removes any oil deposits and will be sand basted, post that the pole will get 2 coats of Epoxy primer and then the Pole will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating.

Decorative Single arım ornamental bracket as per drawing, having unique heavy duty decorative cast iron embellishments. The bracket arm is made out of 50-75mm OD pipe for vertical and 27-50mm horizonal running the cable through the bracket and will have the required reducer to mount hanging LED fixture The surface of the bracket will be cleaned to removes any oil deposits and will have the required reducer to mount hanging LED fixtureThe surface of the bracket will be cleaned to removes any oil deposits and will be sand basted, post that the bracket will get 2 coats of Epoxy primer and then the bracket will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating ( suitable for 7/8 mtr pole as shown in diagram )

Decorative Double arım ornamental bracket as per drawing, having unique heavy duty decorative cast iron embellishments. The bracket arm is made out of 50-75mm OD pipe for vertical and 27-50mm horizonal running the cable through the bracket and will have the required reducer to mount hanging LED fixture The surface of the bracket will be cleaned to removes any oil deposits and will have the required reducer to mount hanging LED fixtureThe surface of the bracket will be cleaned to removes any oil deposits and will be sand basted, post that the bracket will get 2 coats of Epoxy primer and then the bracket will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating ( suitable for 7/8 mtr pole as shown in diagram )

Decorative Single arım ornamental bracket as per drawing, having unique heavy duty decorative cast iron embellishments. The bracket arm is made out of 27 mm OD pipe for running the cable through the bracket and will have the required reducer to mount hanging LED fixture The surface of the bracket will be cleaned to removes any oil deposits and will have the required reducer to mount hanging LED fixtureThe surface of the bracket will be cleaned to removes any oil deposits and will be sand basted, post that the bracket will get 2 coats of Epoxy primer and then the bracket will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating ( suitable for 6 mtr pole as shown in 6 mtr pole diagram no. 1)

Decorative double arım ornamental bracket as per drawing, having unique heavy duty decorative cast iron embellishments. The bracket arm is made out of 27 mm OD pipe for running the cable through the bracket and will have the required reducer to mount hanging LED fixture The surface of the bracket will be cleaned to removes any oil deposits and will have the required reducer to mount hanging LED fixtureThe surface of the bracket will be cleaned to removes any oil deposits and will be sand basted, post that the bracket will get 2 coats of Epoxy primer and then the bracket will be painted with Polyurethane Paint antique finish and a single coat of Lacquer PU coating ( suitable for 6 mtr pole as shown in 6 mtr pole diagram no. 1)

60w Bell shape hanging LED suitable for pole bracket with 3 Years warranty

9 Meter Long Decorative Street Light Pole Supply and Erection of Decorative Cast iron Combo Pole made out of cast iron/aluminium and MS Class material pole (Bottom MS Conical Section 3000mm long. Diameter of the bottom section 220mm x Top 90mm, Along with 90mm Fluted MS pipe-6000mm long). MS Grade IS 1161 pole made out of Conical Section and OD of 90mm fluted pipe and of total height 9.00 Meter above the foundation with arrangement for suitable bracket of 1200mm single/double arm bracket. or double bracket fitting suitable at different height of pole. Pole will have a casting embellishment at 3 meter & I no ring casting on fluted pipe. Base plate size 400x400x16mm PCD of the pole is 320mm A/F. Suitable earthing arrangement is provided. The pole is provided with foundation bolt set M20*600mm long (4 bolts+ nuts). The decorative pole shall be duly pre- treated externally so that rusting should not happened. On the edges and openings the pole is duly painted by one coat of epoxy zinc primer to avoid the corrosion. The pole should be painted with polyurethane paint of approved colour finish.Each and every cast piece is shot blasting to Remove all its external dirt and residues etc. Castings are given an extensive treatment with Epoxy based primer and paint prescribed for such surfaces to make it absolutely rust and corrosion proof, as well as giving it a pleasing appearance through antique finish and colour as per the approval of engineer in charge. Minimum DFT level is 60 Microns. Including junction box consisting of MCB, Bakelite sheet and Connecter. (Details of the specification as per the attached drawing.)

8 meter long Decorative street light pole supply and Erection of Decorative Cast iron Combo Pole made out of cast iron/aluminium and MS Class material pole (Bottom MS Conical Section 2000mm long. Diameter of the bottom section 220mm x Top 90mm, Along with 90mm Fluted MS pipe-6000mm long). MS Grade IS 1161 pole made out of Conical Section and OD of 90mm fluted pipe and of total height 8.00 Meter above the foundation with arrangement for suitable bracket of 1000mm single/double arm bracket. or double bracket fitting suitable at different height of pole. Pole will have a casting embellishment at 3 meter & casting on fluted pipe. Base plate size 400x400x16mm PCD of the pole is 320mm A/F. Suitable earthing arrangement is provided. The pole is provided with foundation bolt set M20*600mm long (4 bolts+ nuts). The decorative pole shall be duly pre- treated externally so that rusting should not happened. On the edges and openings the pole is duly painted by one coat of epoxy zinc primer to avoid the corrosion. The pole should be painted with polyurethane paint of approved colour finish.Each and every cast piece is shot blasting to Remove all its external dirt and residues etc. Castings are given an extensive treatment with Epoxy based primer and paint prescribed for such surfaces to make it absolutely rust and corrosion proof, as well as giving it a pleasing appearance through antique finish and colour as per the approval of engineer in charge. Minimum DFT level is 60 Microns. Including junction box consisting of MCB, Bakelite sheet and Connecter. (Details of the specification as per the attached drawing.)