REPAIRS TO ROAD FURNITURE AND SIDE BERM UNDER GE (WEST) MATHURA

Amount

Supply and fixing in repair solar cat eye aluminium alloy shall (100 % water proofing design according to IP-67) of size 125mm x 125mm x 25mm (Shank 65 mm) of high efficiency mono crystalline solar panel 2.4 V/0.3 Wattone Ni-MH rechargeable battery (1.2V / 1600MA) consisting of 6 super bright LED with 10,000 to 18,000 MCD flash rate 2Hz complete as per manufactural instruction etc complete all as specified and directed.

S&F in repair for ABS plastic Road colour cat eyes having dual direction (both sides) of size 100 mm x 100 mm x 18mm to 19mm having body ABS filled with Epoxy, quartz & sand with PMMA lens with load capacity greater than 50 Kg with visibility 800 mtr and fixed with adhesive as per manufacture instruction etc complete all as specified and directed.

Supply and fixing in repair metal tubular delineator of dia 65mm, height 1010mm, weight 765gm made out of ABS round body fitted on MS pipe of dia 50mm (powder coated), anti rust and anti-theft steel fitted with highly solar reflective reflection embedding PCC for foundation.The delineator provides clear visible guidance in all weather conditions and help to ensure driver safety. With four ultra bright flashing LEDs. Available in red or yellow colours. Special pace for mounting on cone, pole etc. High quality reflective solar panel to maximize sun absorption. Operating time 3-4 consecutive days (with full charge) etc complete all as specified and directed

S &F in repairs stainless steel location board rectangular type and made up stainless steel tubes for pole 40 mm dia framing of grade SS-304 with stainless steel holding support to the brand with stainless steel ball on top of pole at 5 ft above ground with letters, figures of any size and shape (100 Nos) sand base of high prismatic retro reflective tape with letters, figures of any colour of superior quality on both side of board over 2 mm thick stainless steel sheet including necessary excavation for post holes of size 30 cm x 30 cm x 60 cm deep with PCC 1:2:4 type B1 using 20mm graded aggregate complete all as specified and directed.

Size of board exe 1.00 Sqm but n exc 1.30 Sqm

Size of board exe 1.30 Sqm but n exc 2.0 Sqm

Repair to location board of size n exc 2 Sqm with letters, letters, figures of any size, any shape (upto 100 Nos) sand base of high density prismatic retro reflective sheet/tape with ground of any colour of superior quality on both sides ofr board over and including 2 mm thick stainless steel sheet complete all as specified and directed

S&F in repair of convex mirror of dia 1000 mm if imported outdoor, polycarbonate convex mirror with 130 degree + actual viewing angle, equipped with adjusting swivel and mounting bracket for infinite adjustment. Fitted on 80 mm dia & 3 mm thick SS pole with 300 mm dia base plate at bottom and embedded in concrete block 1:2:4 using 12.5 mm stone aggregate of size 450 x 450 x 450 mm below GL. All necessary excavation and formwork included in rate mentioned above etc complete all as specified and directed.

M&L for moorum/red/ bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread levelled and rammed including watering as in side berms etc complete all as specified and directed.

M&L in repair for speed bumps of material PE, height 70 mm having size 730 to 740 mm x 245 mm, minimum weight 2160gm, interlocking type highly resistant to sever impact and harsh weather conditions. Its interlocking sub units make it bind perfectly into a one firm bumps shall be pre coloured material of black, yellow and UV stabilizer with reflector either side. Speed bumps to fixed on road with epoxy adhesive and steel pipe of suitable size as per IRC guidelines and manufacturer instruction etc complete all as specified and directed.

M&L in repair for traverse rumble strips made of PU of height 15 mm having length 500 mm, highly resistant to sever impact and harsh weather conditions. Bumps shall be pre coloured material of black/yellow and VU stabilizer with reflector either side, Rumble strips to fixed on road with steel spike of suitable size and epoxy adhesive and sixing clip as per manufacture instruction etc complete all as specified and directed.

M&L in repair for PVC body median marker for road safety of size 12 x 2.8 x 18 cm for lane marking, median marker, two way marker with unique bounce back feature and retro reflective fixed with steel spike and epoxy adhesive as per as per manufacture instruction etc complete all as specified and directed.

M/s Singh Engineering Corporation (BID ID -3265563)

Shiva Traders (BID ID -3260110)

M/s M S Sharma and Co. (BID ID -3264598)

M/S MRS BHASKAR (BID ID -3259226)

Gupta Automobiles (BID ID -3259869)

RANA CONSTRUCTION (BID ID -3260380)