ADDN/ ALTN FACE LIFTING OF BLDG NO SM-82, TOILET (BLDG NO T-681) AT MANGAL PANDEY TRG AREA, BLDG NO T-677 AT MANGAL PANDEY TRG AREA AND WALL TILES OF HENDERSON HALL KITCHEN INSIDE BLDG NO O-16 AT INSIDE VIJAY DURG UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc (below or above ground) of any descriptions, complete all as specified and as directed.

M&L for brick work with flyash old size bricks straight on plan exc 6m mean radius built in CM 1:6complete all as specified and as directed.

M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

M&L for applying 2mm thick wall care putty (in two layers) on old cleaned / prepared surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces.

Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge.

M&L 18-20 mm thick granite slab (of any type, Z- black or red in colour / in platform , floor , steps of stair cases , pillars or flat surface of wall , and on vertical surfaces etc and like set and jointed in neat cement slurry and pointed in white cement (1:2) mixed with pigment to match laid over screed bed 20mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge

S&F 16 to 18 mm thick Dholpur stone cladding on wall , gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone , polishing, rubbing & including silicon treatment set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm backing coat in CM 1:4 etc complete all as spd and as directed.

M&L White marble (Abu plain) work makarana white,18 to 20 mm thick ( table rubbed and polished) in step , jambs, pillars , window cills etc in cement mortar(1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge

M&L anti - skid homogeneous , full body, Vitrified tiles Matte finish ( any colour , Light/ Dark shade ) 16 mm thick Size of tiles shall not be less than 600 mm x 600mm , in floor / skirting / dado etc complete all as specified and as directed.

M&L Glass mosaic ceramic vitrified glazed colour tiles , size of each tiles size 23 x 23 mm & 8mm thick (Sheet size 300 x 300 mm) , water absorption shall not be more than 0.5% fixed on wall and floor with suitable cement based , polymer - modified mosaic tile adhesive and shall have the property of strong bonding strength , water resistant , flexible, low shrinkage and shall meet the requirement of IS 15477 , coverage area 4.5 Kg/sqm complete all as specified and as directed.

M&L for 15 mm thick screed bed in CM (1:6) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free non skid tiles complete all as specified and as directed.

M&L for 10 mm thick screed bed in CM (1:3) , in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free non skid tiles complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed.

Removing excavated material exc.1.5km but n.exc.5km and depositing where directed.

Material and labour for providing Plain Cement Concrete (1:3:6) type C2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.

S&F for 12 mm thick toughened glass as in hinged doors , partitions, and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F for H shape, pull handle , 300 mm long, 25 mm dia stainless ( SS 304 ) steel handle complete all as specified and directed.

Dismantling of Wall and ceiling boards ( fibre, pulp, insulation, pvc panel etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets of any type, size and at any places complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and directed.

S&F 9 mm thick Plywood, grade BWP , type BB fixed with screws to timber frame work over fillets to match the shape of wall complete all as specified and directed.

M&L for 2nd class softwood plain fillets square or rectangular in section exc 3.00 sqcm but n.exc 6.00 sqcm cleaned swan secured with nails or brads complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4 ) complete all as specified and directed.

M&L 10 mm thick backing coat in CM (1:4 ) on fair faces of brick work or concrete surfaces for wall tiles base complete all as specified and directed.

Taking up GI water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified and directed.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

S&F Double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) incl taking down old one complete all as specified and directed.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) brass hinges ,SS, bright finish or electro galvanised, width of flap 40 mm complete all as specified and directed.

S&F 150 mm Extruded brass handles, fabricated type polished decorative type complete all as specified and directed.

S&F brass multi purpose cupboard lock , size 75 mm , 4 lever complete all as specified and directed.

S & F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150 x 150 mm complete all as specified and directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85-90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter / Partition of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter / partition and fixing with stainless steel butt hinges / screws of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F hold fast for window & doors, made to shape as required all as directed at site complete all as specified and directed.

S & F 200 mm long Brass Finish barrel tower bolt of extrude section complete all as specified and directed.

S&F 100 mm long butt hinges MS medium weight cold rolled.

M&L for PCC 1:2:4 type B1 20mm graded aggregate as in copping, bed hold fast etc. all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of channels for fixing wpc partition , plates etc., including welding, grinding, buffing, polishing, Grauting with cement mortar(1:3), and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts (covered with stainless steel cap) complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or sides of the wall with suitable arrangement complete all as specified and directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed .

M&L 10 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as specified and directed.

M&L preparation of new surfaces and applying two coat of plastic emulsion paint over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.

S&F in repair 15 mm angular stop cock chromium plated with wall flange complete all as specified and directed. Make : Jaqur cat no- KUP-35053PM or equivalent make specified in tender.

S&F In repair CP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and directed (Make : Jaqur cat No- ALD-769L300x190 or equivalent make specified in tender.

S&F in repair CP waste coupling 32mm bore full threaded complete all as specified and directed. ( Make : JAQUAR cat No. ALD-705L130 or equivalent make specified in tender.

S&F in repair chromium plated Toilet Roll Holder with Stainless Steel Flap complete all as specified and directed.( Make : Jaquar Cat No: ACN-1153S or equivalent make specified in tender.

S&F in repair Towel Ring Round with Round Flange complete all as specified and directed. (Make : Jaqur cat No- ACN-1121BN )(Chrome) or equivalent make specified in tender.

S&F Chromium plated Single Lever Basin Mixer with Popup Waste with 450mm Long Braided Hoses fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed.( Make- Jaquar Cat No-KUP-35051BPM or equivalent make specified in tender.

S&F in repair 15mm bore two way bib cock with wall flange chromium plated complete all as specified and directed. (Make : Jaqur cat no- KUP-35041PM or equivalent make specified in tender.

S&F in repair 15mm bore bib cock with wall flange for 15mm bore pipe chromium plated complete as specified and as directed.(Make : KUP-35037PM) (Chrome) or equivalent make specified in tender.

S&F in repair 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and directed. (Make : JAQUAR Cat No.ALD-579 . (chrome) or equivalent make specified in tender.

S&F in repair Soap Dish (Polycarbonate) complete all as specified and directed. Make : jaquar) Cat No. AQN-7733 (chrome) or equivalent make specified in tender.

S&F in repair Soap Dispenser with Glass Bottle ( Make : jaquar) complete all as specified and directed. Make: Cat No. ACN-1135N (chrome) or equivalent make specified in tender.

S&F in repair tumbler holder complete all as specified and directed. Make : jaquar) Cat No. ACN-1141N (chrome) or equivalent make specified in tender.

S&F in repair towel rack with lower hanger and hook 600mm long chromium plated complete all as specified and directed.(Make : Jaquar cat no- AQN-7781 ) (Chrome) or equivalent make specified in tender.

S&F in repair Special designed glass shelf of size 600mm with CP wall flange complete as specified and as directed.(Make :Jaquar cat no- AKP-35771P or equivalent make specified in tender.

S&F in repair corner glass shelf incl taking down old one complete as specified and as directed( Make : Jaquar cat No CPA-1173 or equivalent make specified in tender.

S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge.(Make: Jaquar -ALD-803AB,ALD 805 AB or equivalent make specified in tender.

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF or equivalent make specified in tender.

S&F in repair vitreous urinal (top inlet) with fixing accessories incl spreader, size of urinal 345x320x610 mm , complete all as specified and directed. (Make : JAQUAR, Cat No:URS-WHT-13257 or equivalent make specified in tender.

S&F in repair chrome wall mounted pressmatic taps urinal valve auto closing system for urinal , complete all as specified and directed. (Make : JAQUAR, Cat No: PRS- CHR-077 or equivalent make specified in tender.

S&F in repair chrome finish rectangular shaped urinal partition with 10 mm thick frosted glass with chrome cleats on wall for urinal , complete all as specified and directed. (Make : JAQUAR- 1810 UC , Cat No: JSE-CHR-110US450X or equivalent make specified in tender.

M& L for anti rustic punch sand finish Vitrified tiles Matte finish (in any shade ) 8 to 10 mm thick Size of tiles shall not be less than 1600 mm x 800 mm , in floor / skirting / dado etc jointed and pointed completed all as directed.

M&L for colour polished vitrified ultra charged tiles for vertical surface 1600 x 800 mm, 8 to 10 mm thick thick set and jointed in 4-5 mm thick layer of suitable tilofix adhesive , coverage area of adhesive approx 8 kg per sqm over finished surface of wall and as directed.

S&F cupboard magnets heavy duty in cupboard etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

S&F 300 mm long Brass Finish anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy.

M&L coloured glazed ceramic tiles in vertical surfaces 600X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for and throw out derbies out of the mod land complete all as specified and as directed. (upto 04 storey High of building)

M&L 25mm thick PCC 1:2:4 Type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

M&L Cement concrete in foundations, filling and mass concrete 1:2:4 type B2, 40 mm graded aggregate complete all as specified and directed.

(E/M PORTION) Supply and laying steel water tube 80 mm bore (dia) galvanized "medium grade" with all fittings (Flanges, elbow, tee, long screw, plug with reducer all type/size) fixed on walls, ceiling, or laid on floor or any other situation complete all as specified and directed.

Supply and laying steel water tube 50 mm bore (dia) galvanized "medium grade" with all fittings (Flanges, elbow, tee, long screw, plug with reducer all type/size) fixed on walls, ceiling, or laid on floor or any other situation complete all as specified and directed.

Supply and laying steel water tube 40 mm bore (dia) galvanized "medium grade" with all fittings (Flanges, elbow, tee, long screw, plug with reducer all type/size) fixed on walls, ceiling, or laid on floor or any other situation complete all as specified and directed.

Supply and laying steel water tube 25 mm bore (dia) galvanized "medium grade" with all fittings (Flanges, elbow, tee, long screw, plug with reducer all type/size) fixed on walls, ceiling, or laid on floor or any other situation complete all as specified and directed.

Supply and laying steel water tube 15 mm bore (dia) galvanized "medium grade" with all fittings (Flanges, elbow, tee, long screw, plug with reducer all type/size) fixed on walls, ceiling, or laid on floor or any other situation complete all as specified and directed.

Supply and fixing of 50 mm gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions complete all as specified and directed.

Supply and fixing of 40 mm gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions complete all as specified and directed.

Supply and fixing of 25 mm gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions complete all as specified and directed.

Supply, laying and testing GI pipe 50 mm dia with all fittings including drilling, cutting, welding with GI socket 25 mm dia for fixing of brass jet nozzles at equal intervals of approx 25 cm apart duly laid/fixed on wall / floor including testing complete all as specified and as directed by Engr-in-charge.

Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, Tee, reducer, plug, elbow including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

Supply, installation and testing submersible pump set 7.5 HP cap, electric driven 415 Volts,3000 RPM, Modal KOS-852+, TP suitable for open well Horizontal type monobloc of size 80 x 65 mm (Sec x Del) with suitable cable including in built strainer complete all as specified. Make : KIRLOSKAR /CROMPTON GREAVES/L&T/SIEMENS

Supply, fixed and testing of heavy duty Automatic Star Delta starter suitable for submersible pump set of capacity up to 12.0 HP, 415 volts (3 ph), type DX-P with robust 4 pole contractor, LR1D OLR & relay LR1D range 7-10 Amps, Electronic star delta timer in SS enclosure complete all as specified and as directed, Make C&S, Cat No BE3-DXP204-314

Supply, laying on wall with suitable saddle and testing of XLPE insulated heavy duty electric cables with aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core complete all as specified and as directed.

Supply and laying PVC insulated and PVC sheathed with electrolytic grade Annealed copper conductor having 3 core 4 sqmm flat submersible pump and motors, 1100 volts as per confirming to IS : 694-1990 complete all as specified and directed.

Supply and fixing Flower nozzles/ Crown Nozzles/bell /foam type brass fountain complete all as specified.

Supply and fixing brass jet type nozzles 15 mm dia, one end outer threaded for fixing on GI socket complete all as specified and directed by Engr -in -charge.

Supply and fixing in repair LED light colour changing RGB controller to each achieve six colours sequence operation of capacity 230 volts 10 Amp including taking down unserviceable fitting complete all as specified and directed by Engr-in-charge.

Supply and fixed die cast aluminium LED light fitting 6x3 watt IP- 65 suitable for to work 700 mA constant current and 6-12 volt with current driver including 3 Nos colour LED 3 wheels, lens, glass, gland, clamp etc complete all as specified and directed,

Supply, fixing & testing of LED bush light 09 watts in die cast aluminium housing with high quality toughened glass diffuser, water proof complete all as specified and as directed Make- Surya Cat No SLE BSL 9W.or equivalent make specified in tender.

Supply and fixing LED flood light 50 watts COB based die cast aluminium housing with toughened glass cover (IP- 65 protected) complete all as specified and as directed Make- Crompton Cat No CFS 504-50-57-60D-SL-GL-NSG..or equivalent make specified in tender.

M&L for installation, commissioning & testing of CPRI approved "outdoor cubical canopy type" LT distribution control panel board fabricated with 3.15 mm thick CRCA sheet totally enclosed type, dust & vermin proof, back side openable or having opening at bottom for entry of outgoing/incoming cables, fixed with notes & bolts & front side openable with hinged shutter with suitable locking arrangement ( preferably double door type), complete required supporting MS angles, flats, channels, with grouting on floor/brick work & duly painted with powder coated paint of approved grade after preparation of surfaces complete with aluminium bus bar comprising of the following accessories, including making electric connection complete by means of suitable sized aluminium lugs, notes, bolts, washers etc & making good the disturbed surfaces complete all as specified and directed.

INCOMING (a) MCCB 4 poles 63 Amp, 25KA with thermal magnetic release with all protection by pass facility -01 Nos (b) Digital parameters (Volt metter & Ammeters) complete set -01 Set (c) LED Indicator lamp with assembly (set nof three) RYB suitable for AC 230 Volts complete. - 01 Set (d) Copper busbar 200 Amps for 3 ph & neutral - 01 set

OUTGOING (a) MCCB 4 poles 40 Amp, 16 KA with thermal magnetic release with all protection by pass facility -02 Nos b) submersible pump starter 7.5 HP capacity three phase, 415 volt -02 Nos (Note: submersible starter Measured and paid separately.) (c) MCB SPN 16 Amp -2 No

Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

All as per item No 103 but one 3/5 pin socket outlet, 5 Amp independent

All as per item No 103 but one 3/5 pin socket outlet, 5 Amp on the same board with other switches

All as per item 103 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 103 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push 6A, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 1/2 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

All as per Srl. Item No. 125 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 125 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

S & F Double door sheet metal enclosure for DBs(Premium range) for mounting of MCB for 240 Volts 8 Way with 100 Amps rated copper bus bar, single pole and Neutral complete all as specified and directed.

Supply and fixing MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

M/S S. K. SARKAR (BID ID -3473248)

RAJ ENTERPRISE (BID ID -3471719)

DEB AND COMPANY (BID ID -3471939)

M/S SRINIVASA CONSTRUCTION (BID ID -3472242)

M A ENTERPRISES (BID ID -3470776)

MS JYOTI INDUSTRIES (BID ID -3471194)

JOY-EN-JOY (BID ID -3473020)