e-NIT No.06 / (EnM)M-VIII/ 2025-26, Item No.38

Dismantling of existing L T Panel and electrical system after disconnecting incoming and outgoing connections, Starters connections, Cable connections, removing the existing material using labour, tools and tackles etc. as per site requirement.

Charges for shipping the panel up to the site including lifting charges, loading and unloading charges and other charges for shifting the panel up to the place it has to be installed.

Fabrication and supply of base frame made out MS Angle duly painted of size as suitable for above panel to be fixed.

Fixing of the new L T Panel with base frame at the site including all other work as per site requirements.

Making the incoming connections to the Panel by making required Cable connections between the main supply through existing cable including providing & fixing of consumables as per requirement.

Fabrication and supply of base frame made out of angle iron of suitable size for fixing the above starters and suitable for making outgoing /incoming cable entries in the starter panels. It should be duly painted and ready with provisions for installing at the site.

Fixing / Installation of the above Starters along with their base frames at site with carrying out all the required works with providing material / consumables as per site requirements.

Supply of Copper Cable of size 35 sq mm X 1 Core make of cable: - Havells / Polycab / DJB Approved

Supply of Copper Cable of size 25 sq mm X 1 Core make of cable:- Havells / Polycab / DJB Approved

Laying of above cable for making supply connections between LT Panel to starters and Starters to motors etc as per site requirement.

Making the outgoing connections of the 150/160 A MCCBs by Connecting MCCBs in panel to the incoming side of starters Through new cables as per site requirement, with proper thimbling and tapping etc. including providing & fixing of material as per requirement.

Making the outgoing connections of Starters by Connecting starters to the Motors Through the new cables as above as per the location of the newly fixed starters as per site requirement including providing & fixing of material as per requirement.

Making outgoing connections as required for lighting loads by connecting MCB from the panel including required connections etc .

Making the outgoing connections of DOL Starter by Connecting to the Pump with existing cable as per site requirement including providing & fixing of material as per requirement.

Testing and Commissioning of the Panel Board first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Testing and commissioning the starters first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

arun engineers and contractors (BID ID -1598542)