REPLACEMENT OF OLD RUSTED CGI SHEET ASBESTOS SHEET AND FALSE CEILING UNDER AGE BR DETT-B OF GE 862 EWS

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheeting in roof covering including ridges, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof bent to a curve of any radius as directed by GE fixed with self tapping screws including side end lap as per manufacturer's instructions, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.

Dismantling structural steel work including welded fabriks frames, doors, gates, grills grating and framed truss etc, complete all as specified and directed.

M&L for roof truss (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc (Frames, purlins, rafters of Fe-410 W Gde E-250 Quality A) complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions including dismantling of existing board with cover fillets etc, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.

Description all as per srl item no.12 here-in-before but except stone. Note: stone retrieve from item no. 11 will be reused.

M&L for 20 mm thick rendering on stone masonry surface of wall in cement mortar 1:4 at any height, surface finished even & smooth without using extra cement, complete all as specified and directed.

Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surface or fair faces of brick wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall care putty 3mm thick to make surface even, complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper including preparation of surface, complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surface or other than fair faces of brick wall in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of newly plastered surface of wall and applying two coats of exterior weather proof paint over a coat of primer, complete all as specified and directed by Engineer -in - Charge.

M&L for complete removal of existing treatment on old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior weather proof paint, complete all as specified and directed by Engineer -in - Charge.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, in eaves gutters, with all fittings such as elbow, equal tee, coupling, Y- junction, Tee etc. including MS clamps for fixing to wall including taking down old pipe with fiitings, complete all as specified and directed.

M/s Anil Engineers & Builders

KANWAL KUMAR GUPTA

NATIONAL TRADING COMPANY