Interior And Other Civil Misc. Works Of Multi-Purpose Hall At ILBS Residential Complex, Vasant Kunj, Delhi.

NAME OF WORK :- INTERIOR AND OTHE CIVIL MISC. WORKS OF MULTI-PURPOSE HALL AT ILBS RESIDENTIAL COMPLEX,

VASANT KUNJ, DELHI.

BILL OF QUANTITIES

AMOUNT AMOUNT AMOUNT

S.No. DESCRIPTION OF ITEMS

CPWD//DSR-2023 CPWD//DSR-2025 M.R.

2 PLUMBING WORK 53,163.46 7,22,071.50

3 ELECTRICAL WORK 9,97,682.97 2,19,105.79

Digitally signed by AVDHESH

NAME OF WORK :- INTERIOR AND OTHE CIVIL MISC. WORKS OF MULTI-PURPOSE HALL AT ILBS RESIDENTIAL COMPLEX, VASANT KUNJ, DELHI.

ABSTRACT OF COST FOR CIVIL WORKS

[Based on DSR- 2023 ]

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

A DEMOLISHING WORK -

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge.

In cement mortar. cum 2.31 2,060.20 4,759.06

Dismantling steel work manually/ by mechanical means in built up sections without

2 15.19 dismembering and stacking within 50 metres lead as per direction of Engineer-in-

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved. CUM 2.31 263.95 609.72

Removing dry or oil bound distemper, water proofing cement paint and the like by

4 13.91 scrapping, sand papering and preparing the surface smooth including necessary

repairs to scratches etc. complete. sqm 134.98 25.15 3,394.75

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4

coarse sand (zoneIII)derived from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources) CUM 10.61 6,812.00 72,275.32

Centering and shuttering including strutting, propping etc. and removal of form for

6.1 5.9.9 Arches, domes, vaults up to 6 m span SQM. 8.05 2,154.35 17,342.52

Suspended floors, roofs, landings, balconies and access platform with water proof

6.3 5.9.16.1 Edges of slabs and breaks in floors and walls Under 20 cm wide RMT. 10.22 208.55 2,131.38

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of

concrete. Note: Extra cement up to 10% of the minimum specified cement content

in design mix shall be payable separately. In case the cement content in design mix

is more than 110% of the specified minimum cement content, the contractor shall

have discretion to either re-design the mix or bear the cost of extra cement.

5.33.2 All works above plinth & up to floor V level. -

Concrete of M25 grade with minimum cement

content of 330 kg /cum CUM. 5.940 9,860.40 58,570.78

STEEL REINFORCEMENT -

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

8 5.22.6 placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. QTL 7.43 10,785.00 80,132.55

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

10 6.13.2 designation 7.5 in superstructure above plinth level up to floor V level.Cement

mortar 1:4 (1 cement :4 coarse sand) SQM 92.87 1,123.80 1,04,367.31

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry. SQM 92.870 104.80 9,732.78

E CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade, colour and texture laid over

12 DSR-8.2 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc. complete at all

DSR-8.2.2 Granite stone slab colour black, Cherry/Ruby red -

(i) DSR-8.2.2.1 Area of slab upto 0.50 sqm SQM 12.210 5,413.50 66,098.84

(ii) DSR-8.2.2.2 Area of slab over 0.50 sqm SQM 6.550 5,136.30 33,642.77

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

13 DSR-8.3 including machine polishing to edge to give high gloss finish etc.complete as per

design approved by Engineer-in-Charge. -

Extra for fixing marble /granite stone, over and above corresponding basic item, in

14 DSR 8.4 facia and drops of width upto 150 mm with epoxy resin based adhesive, including

cleaning etc. complete. RM 174.730 568.55 99,342.74

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and

polishing of cut edges etc. complete NOS. 5.000 978.70 4,893.50

F WOOD WORK -

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

16 9.1.1 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

Second class teak wood Cum 0.660 1,42,949.70 94,346.80

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and fixing panelled or panelled and glazed shutters for doors, windows

and clerestory windows, fixing with butt hinges of required size with necessary

screws, excluding panelling which will be paid for separately, all complete as per

17 9.5.1.1 direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be

paid separately)

Second class teak wood

35 mm thick shutters SQM 17.100 4,111.95 70,314.35

Providing and fixing panelling or panelling and glazing in panelled or panelled and

glazed shutters for doors, windows and clerestory windows (Area of opening for

panel inserts excluding portion inside grooves or rebates to be measured).

Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Second class teak wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and

glazed shutters for doors, windows and clerestory windows (Area of opening for

panel inserts excluding portion inside grooves or rebates to be measured).

19 9.7.7.2 Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Float glass panes 5.0 mm thick glass panes (weight not less

than 12.50 kg/sqm).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

21 9.23 on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete :

2nd class teak wood

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone

aggregate 20mm nominal size). NOS. 54.000 228.85 12,357.90

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight)

with stainless steel screws etc. complete : -

Providing and fixing aluminium hanging floor door stopper ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or shade with necessary screws etc. complete. Twin rubber

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt / suede finish with high density protective surface layer and reverse side

26 9.127.2 of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality

& make with necessary screws etc all complete. (a) 125 mm. NOS 28.00 119.20 3,337.60

Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/Clerestory windows & other Frames/Chowkhat comprising of

virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying

PVC solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N

(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity 900 N/mm2 and resistance to spread of flame of Class A category with

30 26.86 property of being termite/borer proof, water/moisture proof and fire retardant and

fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e

depth and width of profile shall be acceptable. Variation in profile dimensions on

plus side shall be acceptable but no extra payment on this account shall be made.

WPC DOOR SHUTTERS FOR TOILETS -

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum

density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless

steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:

stainless steel butt hinges and necessary S.S screws shall be paid separately)

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

ALUMINIUM WORK -

2 Track Sliding Door Specifications: Supply & fixing of Factory made High

Performance System Aluminium 2 Track Sliding Doors as per design &

specifications with outer frame vertical section of 108.1mm X 25mm, outer frame

horizontal section of 108.1mm X 45mm, Glass Shutter vertical section of 68mm X

32 M.R. 42mm, Glass shutter horizontal section of 68mm X 42mm, Flat Interlock size of

53mm X 25mm & Reinforced Interlock size of 127mm X 25mm with high quality

Powder coating, 12mm Clear toughened glass, Handle, EPDM Gasket, Floor

spring, Silicon sealant with complete hardware of reputed brand,

UPVC DOORS /WINDOWS

Providing and fixing factory made uPVC glazed/wire mesh windows/

doors comprising of lead free uPVC multi-chambered frame, sash and

mullion/coupler (where ever required) extruded profiles having minimum

wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to EN: 12608 in any shape,

colour and design duly reinforced with galvanized mild steel section

made of required shape & size as per CPWD Specification, uPVC

extruded glazing beads, interlocks and Inline sash adaptor (where

ever required) of appropriate dimension, EPDM gasket, hardware, SS

304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame

to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

caps and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion welded/mechanically

33 9.147A jointed duly sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon

sealant over backer rod of approved size and quality, all complete as

per approved drawing conforming to CPWD specification & direction of

Engineer-in-Charge. Section of steel reinforcement and cross sections

of uPVC profiles to be as per design approved by Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit

with / without high performance coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be paid separately.

Note:- Structural design proof checked from a Government

Engineering Institute, to be provided by the manufacturer for :

(i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3

(ii) Sites with structure height more than 20m for all wind speeds

Three track three panels sliding window with two glazed & one wire mesh panels

with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and

9.147.A4.2 fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder

coated handle on every glazed panel along with multi-point locking system. (Height

Fixed window / ventilator with mullion / transom. Using R4 series with frame (64 mm

34 & above ) x (50 mm & above) & mullion (64 mm & above) x (70 mm & above).

Ventilator Casement window single panel with or without fixed panel with S.S. 304

friction hinges as per size and weight of sash, single point locking zinc alloy (zamak)

35 9.147.D1.1 powder coated handles. Using R1 series with frame

(33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm &

above). (Height upto 0.90 metre).

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and

clerestory windows using wire gauge with average width of aperture 1.4 mm in both

directions with wire of dia. 0.50 mm all complete

With 12 mm mild steel U beading SQM 6.97 1228.00 8,559.16

Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as

37 21.3.2 per the architectural drawings and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid in basic item): With float glass panes

of 5 mm thickness (weight not less than 12.50 kg/sqm)

G STEEL WORK -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

38 10.28 steel dash fasteners , stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

H PLASTERING AND POINTING -

15 mm cement plaster on rough side of single or half brick wall of mix :1:6 (1

cement: 6 coarse sand) SQM 111.81 395.35 44,204.08

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand) SQM 111.87 343.65 38,444.13

6 mm cement plaster on celling

1:3(1 cement:3 fine sand) SQM 6.55 300.45 1,967.95

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content

less than 50 gram/litre, of approved manufacturer and of required shade and colour

all complete to achieve even shade and colour :

42 DSR-13.41.1 New work (two or more coats) over and including water

thinnable priming coat with cement primer having VOC content

less than 50 gram/litre

Finishing walls with textured exterior paint of required shade :

43 DSR-13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming

coat of exterior primer applied @2.20kg/10 sqm. SQM 111.810 223.60 25,000.72

Finishing with Epoxy paint (two or more coats) at all locations prepared

and applied as per manufacturer’s specifications including appropriate

priming coat, preparation of surface, etc. complete.

On steel work SQM 193.430 241.75 46,761.70

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and applying white cement based putty of average thickness 1 mm, of

45 13.80 approved brand and manufacturer, over the plastered wall surface to prepare the

surface even and smooth complete. SQM 130.390 156.05 20,347.36

French spirit polishing

Two or more coats on new works including a coat of wood filler SQM 30.220 446.25 13,485.68

providing and laying 65 mm wide PVC moulding is a high-quality, durable trim made

from rigid polyvinyl chloride (PVC), designed for decorative framing, edging, and

interior applications.installed using adhesives. thicknesses 12 mm

providing and laying 22 mm wide PVC moulding is a versatile and durable trim

48 MR made from high-quality polyvinyl chloride (PVC), installed with adhesives on walls,

With a thickness of 8 mm RMT. 742.160 148.68 1,10,344.35

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required. In gratings, frames, guard bar, ladder,

railings, brackets, gates and similar works Kg 2869.040 172.60 4,95,196.30

Supply & Installation of GRC (Glass fiber reinforced concrete) of specified thickness

and design, to be fixed on MS frame of HSP/RCC/Brick wall as provided by client,

using Std ISI mark GIself -drilling screws/dash fasteners

etc., complete in all respect as per the instruction of Engineer-in charge

Thickness: 50 mm Border 35 mm Pattern Size as per site Sqm. 89.570 4,130.00 3,69,924.10

Supply & Installation of GRC (Glass fiber reinforced concrete) elements of specified

51 MR thickness and design, to be fixed on MS frame of HSP/RCC/Brick wall as provided

by client, using Std ISI mark GI self -drilling screws/dash fasteners etc., complete in

all respect as per the instruction of Engineer-incharge.

Providing and fixing of Blinds in band width 7.5 cm - 12 cm and made up of 100%

polyster, in width of 250 - 280 cm, weight - 160g/sqm - 190g/sqm, thickness - 0.50

mm - 0.70mm ( opaue part ), Colorfastness to light - above 4 grade. Blind tube

made of aluminium with a diameter of 36mm, botom rail made of aluminum with

powder coated having weight 390 gm/meter fitted with end caps in colour matching

to the fabric and mechanism of plastic with chain and metal bracket. The blind shall

have aluminum cover with the matching fabric designed on it. Aluminium profile

should have temper WP consisting of alloy 63400 along with anodizing of 10 micron

and powder coating of 60 micron. The tensile strength of profile should be 9.10

Kg/mm square and elongation 18.The control clutch drive unit engineered heavy

duty chain drive pulley operating system consisting of gear clutch housing and

locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller

tube. Self-lubricating exclusive clutch with safety pins for secure bracket installation

and unlocking pin for quick manual removal. It shall be driven by a ball chain pulley

with ball chain and can be positioned at Right hand or Left hand side of the shade.

Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting

hardware brackets universal brackets including end plug bracket with lock down

retainer device. Brackets finish of powder coated metal installation brackets made

of stamped and hardened steel. Roller tube circular-shaped aluminium tube

extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded

aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord

with plastic balls moulded to form an endless ball chain used for raising or lowering

action of the shades. All plastic components must be UV-stable - white in colour.

Planter/Garden Waterproofing

Waterproofing treatment to Planter/Landscape Area

The procedure to operate this item is as follows

Surface Preparation (Crack Filling and Grouting) , followed by Waterproofing

53.1 Membrane of single component Pure Polyurethane based elastomeric liquid

membrane based waterproofing system.

Treatment to Construction Joints in RCC slab by making groove of

25mmx25mm. :- Making a groove of 25 mm x 25 mm at construction joints and

a applying, Cementitious coating as priming coat in groove thereafter filling the

groove with acrylic polymer modified nonshrink cementitious mortar including curing

Injection Grouting Treatment- Providing and fixing 10 to 12 mm dia. PVC nozzles

and carrying out injection grouting to the RCC surface at honeycombs, voids,

cracks, etc., on the rcc floor & wall etc., wherever required as per our judgement,

b to full saturation, using cement slurry grout admixed with @ 400 Gm. per bag to full

saturation and nonshrink grout @ 225 gram per bag of cement, using gravitational

pressure/ Grout pump etc. complete.

Making of Watta/Gola : at junction of slab & parapet wall 75x75 mm in cement

mortar (1:4) admixed with with small brickbats embedded and admixed with as per

standard design and finishing with cement mortar 1:4 (1 cement:4 fine sand) as per

standard design

Ponding test to be done after treatment to Construction Joints, Grouting to

Note Honeycombs voids etc. for atleast 3-7 days. - to check for water tightness of slab.

Waterproofing Layer of : Single Component Pure Polyurethane based

elastomeric liquid membrane

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and applying single component, high solid, high tensile and high

elongation moisture cured modified pure Polyurethane based cold applied

elastomeric waterproofing liquid-membrane coating as waterproofing treatment to

external surface of RCC Retaining wall by the manufacturer and applied by

applicator consisting of following operations.

a) Brushing and vacuum cleaning the surface to make free from any loose material,

oil, grease, burr, dirt extra.

b) Reparing the surface if required, as per recommendation of manufcature or his

aprroved applicator to make it water tight for which nothing extra shall be paid.

c) Then apply PU coating in two coats by brush/roller/airless spray @ 2.2kg./sqm

to 2.3 kg/sqm, while primed surface is tacky. Second coat is applied

perpendicular to dried first coat, three coats shall form 1.5 mm DFT (Dry Film

Thickness). The coating shall be continued on to the adjacent vertical substrates.

Coating on vertical surface when tacky shall be sprinkled with sand of 200-300

micron (dried sand) at coverage of 0.8-1 kg/sqm to facilitate plastering. This

application shall include cleaning and brusing the concrete surface, grouting the

porous area with cement grout if required and treating all construction joints with

polymer mortar before applying single coat of PU primer @0.10 lt/sqm .

Once cured PU coating shall achieve excellent waterproofing properties as follows:-

i) Elongation at break >650 ± 50 %(ASTM D412/DIN 52455),

ii) Crack bridging ≤ 2.0mm(ASTM C836)/EOTA TR-008,

iii) Tensile Strength > 4N/sqmm as per DIN 52455/ASTM D 412.

iv) Adhesion to primed concrete(Pull of strength) > 2 N/sqmm as per ASTM D903,

v) Shore A Hardness 50 ± 5 as per ASTM D2240,

vi) Solid content > 90 %

vii) Resistance to water pressure up to 1m water column as per DIN EN 1928.

viii) coating can be servicable at a temp range of ‐40deg C to +70deg C etc.

53.2 Geotextile layer (Cushioning & Separation Layer)

Providing and laying 150 GSM non woven polypropylene based geotextile layer

Protective and slope making layer of Concrete Screed : M20 grade concrete

80-100 mm thick for getting slope.

Providing and laying protective and slope making screed concrete, of M20 grade,

including 100% virgin polypropylene fibers at the dosage rate of 0.9 Kg. per Cu.M.

and @ 200 ml per bag of cement, well compacted to a float finish with a false

square marking of 300 mm X 300 mm or kept rough to receive further finish, as

directed to us at site, with a total thickness of screed concrete of average 100 mm

with a minimum thickness of 50 mm laid to a slope of 1:120, making wattas at the

junction of the horizontal and vertical surfaces of concrete screed, cured for 7 days

53.4 Protection for Vertical Surfaces:

Providing and sprinkling of sand to create key for the plaster as the bond layer,

followed by providing and laying waterproof and protective plaster consisting of

double coat plaster of average 25 mm thick on the wall in cement mortar (1:3)

including mixing @ 200 ml per bag of cement making wattas at the junctions of

floor and wall, keeping the surface rough to receive further finishing, curing for 7

days etc. complete.

Treatment to Pipe Entry / Exit Locations i.e around Penetration in the floor &

Grouting around the periphery joints of pipes passing through the floor and walls in

various locations by filling -micro concrete , in the gap between the cut outs in the

slab and the pipe surface and sealing around the periphery joints of the pipes using

- PU sealant of 15mm x 15mm fillet. Allow to cure for 24 hours. Then prime

substrate and pipe and apply membrane to primed areas and over PU Sealant fillet

to minimum 1.5mm DFT in one or two coats.

Note: Rates only wherever applicable.

All systems to be installed as per manufacturer's recommendations, etc. complete

with all lead and lift for all materials and labour and as directed by Engineer in-

Soil Filter Cum surface drainage system for areas to receive Landscape.

Supply and installation of Rolled Matrix Soil Filter cum surface drainage System

of Sterling Technotrade, as per manufacturers specifications. consist of dimple

raised, moulded polypropylene sheet bonded to a high strength polypropylene

geotextile fabric This geotetile fabric composite allows passage of moisture through

fabric while preventing fine soil from entering to drainage channel has a

compressive strength of 712Kg/Sq.Mt. and thickness of 11 mm.

53.7 Anti Root Barrier : Additional for Deep Root Plants

Providing and laying anti root barrier membrane to all as per manufactures

recommendation etc. complete. Root Barrier Pro consists of green colored Elvalloy

polymer layer of approx. 25 GSM, fused onto Typar non woven polypropylene

geotextile layer of 300 GSM, so that the total weight of the membrane is approx.

325 GSM with nominal thickness of 0.8 mm. The membrane shall be loosely laid

over the surfaces with an overlap of 50 mm between the adjoining rolls.

Hall Cabinet Work -

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid board one side white color and other side of board laminted with PVC foil of

minimum 14 micron thickness of approved design pasted with hot melt adhesive for

cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes

comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800

26.89 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of

elasticity 850 N/mm2 and resistance to spread

of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant and fixing with stainless steel piano

hinges/soft close clip on concealed hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-

Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and

necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain white color board for backing of cup boards and bathroom/kitchen

cabinets etc. of required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800

26.90 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,modulus of

elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer

proof, water/moisture proof and fire retardant and fixing with stainless steel screws

etc. all as per direction of Engineer-In-Charge. (Note: stainless steel screws shall be

paid separately)

Providing and fixing stainless steel fancy handle of approved make fixed with SS

57 9.170.1 screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges

(hydraulic type) of approved make/brand to

58 9.171 cupboard shutters with full threaded steel screws including making necessary

recess in board and finished etc. complete as

per direction of Engineer-in-charge Nos. 72.000 272.00 19,584.00

Painting with black anti-corrosive bitumastic paint of approved brand and

59 13.65.1 manufacture to give an even shade : Two or more coats

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer’s specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks) SQM 243.500 1355.80 3,30,137.30

Supply and installation of Plaster of Paris (POP) false ceiling, including plastering,

finishing, joint filling, sanding, and painting to achieve a smooth and uniform

surface. The work includes preparation, application of POP, and final decorative

finish as per the design and specifications. SQM 24.350 4382.00 1,06,701.70

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in

true horizontal level, suspended on inter locking metal grid of hot dipped galvanized

steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of

main “T” runner with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to

center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet,

1200 mm long spaced between main “T” at 600 mm center to center to form a grid

of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall angle of size

24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/ making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using

GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level

clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T,

bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester

paint, all complete for all heights as per specifications, drawings and as directed by

Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm,

made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095

part I and laminated with white 0.16 mm thick fire retardant PVC film on the face

62 12.52.3 side and 12 micron metalized polyester on the back side with all edges sealed with

the face side PVC film which goes around and wraps the edges and is bonded to

the edges and the back side metalized polyester film so as to make the tile a

completely sealed unit. SQM 16.310 2215.15 36,129.10

WALL PANELLING/CLADDING

Providing and fixing Wall Paneling with Grooved Slats Acoustical High Density Fiber

Board FR Grade , Termite Resistance , Water Resistance Panels 16 mm with lineal

perforations.The panels shall be one side Pre-laminated board (decorative

lamination on one side and other sides balancing lamination ) grade -1 with 2mm

grooved at 16/32 mm pitch, Toungue and Groove edges for seamless mounting

having density of 750- 800kg/m3. The back of the panels are perforated with 10mm

63 diameter circular holes with a nonwoven fabric covering of 0.2mm for providing

Sound absorption .Panel is to be fixed on Aluminium section (weight

approx.150gm/mtr) framework with screw fixed on stud of Knurling G I section of

prime quality cold rolled steel as per IS 513 hot dipped galvanized 120 gsm as per

BS 2989 and zinc coating as per IS 277 of Knurling GI-48 mm

(48X34X36X0.5X3050/3660) wall channel and Knurling GI 50 mm

(50X32X32X0.5X3660) floor

MR and ceiling channel are to be fixed with nylon plastic sleeves and wooden screws to

from the proper framework . The extra channel must be used at openings and

junctions as required. The cavity of framework should be inserted with Polyester

Wadding backing/ infill 50 mm with density of 1000 gsm having flammibality - IS

15061-2002 Annexure clause A 3.2 for better insulation. The stud will come at every

600 centre to centre & Aluminium Core Cross channel having thickness 0.50 mm,

lenght 2400mm , depth 18 mm and flanges of 7 mm with suitable edge bracket &

center bracket is then fixed prependicular to stud & floor channel with help of

fasteners at every 400 mm centers.

The installed system will have NRC not less than 0.84 as per IS: 8225 / ISO: 354 /

ASTM 423. Contractor to provide expansion joints of 3 mm ar every 5 mtr

bothways. as per manufacturer's specification as per direction of Engineer-in-

Charge. ( Make: Earcons Acoustic, Anutone, Top Akustik)

Wall Panelling Specification Above 4 Feet Till Celing LVL :- Providing and fixing of

Fire Resistance Grade Stretch Fabric with the help of PVC Track 25 mm half wrap

and mid seam. Magnisite Bonded Wood Wool Panel having size 1200x600x20 mm

panel having fiber width both side is 0.5 - 1 mm with having density 456 kg/m3 .

Which will comprise to NRC Upto 0.90. Panel is to be installed on Knurling GI 48

mm (48X34X36X0.5X3050/3660) framework and meet the stringent fire test

required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class

‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class

64 ‘1’ are the highest rating.

BS 476 part 6 Fire Propagation index and for Flaming ISO 1182 and Smoke density

as per ASTM E 662 besides base panel conform to EN 13168 2000 is to be fixed on

stud of Knurling G I section of prime quality cold rolled steel as per IS 513 hot

dipped galvanized 120 gsm as per BS 2989 and zinc coating as per IS 277 of

Knurling GI-48 mm (48X34X36X0.5X3050/3660) wall channel and Knurling GI 50

mm (50X32X32X0.5X3660) floor and ceiling channel are to be fixed with nylon

plastic sleeves and wooden screws to from the proper framework .

The extra channel must be used at openings and junctions as required. The cavity

of framework should be inserted with Polyester Wadding backing/ infill 50 mm with

density of 1000 gsm having flammibality - IS 15061-2002 Annexure clause A 3.2

for better insulation. The stud will come at every 600 centre to centre & Panel to be

fixed perpendicular to the GI-48 mm channels with steel screws.

PVC Tracks should be fixed directly by screw to the Magnisite Panel with Ply Strip

100 x 8 mm and track should be supported from channel.The cavity of tracks filled

with 25 mm thk polyester wadding having density 1000 gsm having flammibality - IS

15061-2002 Annexure clause A 3.2 for better insulation. Then stretch FR Grade

Fabric which will comprises flammability as per FMVSS 302 having to be stretched

on these tracks with 1200mm module or as per the drawing. This system having

0.90 NRC. (Make: Earcons Acoustic , Anutone , Echofon)

Providing and fixing machine cut, mirror/ eggshell polished , granite work for wall

lining (veneer work) including dado, skirting, risers of steps etc., in required design

and pattern wherever required, stones of different finished surface texture, on 12

mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed

with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry

admixed with pigment of matching shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as directed by the Engineer-in-Charg .

Granite of all colour except black, cherry/ruby red 18 mm thick (slab area above

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and fixing stone-textured wall tiles on vertical surfaces, including surface

preparation, leveling, and application of approved quality polymer-modified tile

adhesive, fixing of first quality stone-texture finish tiles (size and shade as

approved), joint filling with matching cementitious/epoxy grout, and finishing in

proper line, level and plumb, complete in all respects including labour, materials,

tools and tackles as directed by the Engineer-in-Charge. SQM 57.600 2835.00 1,63,296.00

Providing and supplying aluminium extruded tubular and other aluminium sections

as per the architectural drawings and approved shop drawings , the aluminium

quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder

coating of 60-80 microns conforming to AAMA 2604 of required colour and shade

67 25.1 as approved by the Engineer-in-Charge. (The item includes cost of material such as

cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame

work. Nothing extra shall be paid on this account). The weight of aluminium

extruded section shall be taken for purpose of payment.

Providing and fixing 6 mm thick both sides Pre-laminated cement bonded wood

particle board as per IS : 15786:2008 of approved brand and shade with suitable full

68 9.167 threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen

cabinet under kitchen counter etc. all complete as per direction of Engineer-in-

FLOORING SQM -

Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of the slab,

69 11.26.1 including rubbing and polishing complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars

laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse

sand) and jointed with grey cement slurry mixed with pigment to match

the shade of the slabs, including rubbing and polishing complete. SQM 3.01 2354.70 7,087.65

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

71 11.41A.2.2 pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily..

Glazed vitrified floor tiles polished finish of size

Size of Tile 600x1200 mm.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

72 11.41A.3.2 pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt/Antiskid finish of size

Size of Tile 600 x 1200 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

73 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

73.1 11.41A.1.3 Double charge vitrified tile polished finish of size 600 x 1200 mm SQM 99.840 1577.15 1,57,462.66

Providing and laying flamed finish Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye

Digitally signed by AVDHESH

S.N. SCH. NO. DESCRIPTION OF ITEM UNIT QUANTITY RATES

DSR ITEMS MR ITEMS

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement

75 11.56.1 slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand

and manufacture, including applying additional coats wherever required to achieve

even shade and colour.Two coats. SQMT 958.480 137.45 1,31,743.08

Correction factor on DSR-2023 @0.973 55,30,706.52

Digitally signed by AVDHESH

NAME OF WORK :- INTERIOR AND OTHE CIVIL MISC. WORKS OF MULTI-PURPOSE HALL AT ILBS RESIDENTIAL COMPLEX, VASANT KUNJ, DELHI.

S.No.Sch No. Description Unit QTY Rate MR Amount

ABSTRACT OF COST FOR PLUMBING WORKS

A. SUB HEAD - I : SANITARY INSTALLATION DSR-2023

1 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps

syphonic water closet of approved brand/make, shape, size and pattern including

integrated white vitreous china cistern of capacity 10 litres with dual flushing system,

including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and

gasket etc including making connection with the existing P/S trap, complete in all

respect as per directions of Engineer-in-Charge.

2 MR Providing & Fixing of first quality white vitreous china oval/ table top /round wash

basin for under counter mounting, specially fabricated C.I/ M.S brackets, painted

with two or three coats of enamel paint of approved shade over a coat of primer,

C.P brass chain & rubber plug 32 mm C.P brass waste and C.P brass cast bottle

trap and pipe to wall with C.P brass flange and rubber adopter for waste connection

complete including cutting and making good the walls wherever required.

3 MR Providing & Fixing of white glazed vitreous china flat back urinals with sensor

approx. size 610 x 400 x380 mm, flushing with electrical / battery operated urinal

sensor with concealed GI flush pipes (IS 1239 medium class) 32 mm domical

waste with fuillaries trap and pipe to wall flange complete including cutting and

making good the walls and floors complete wherever required. Each 2 15,694.00 31,388.00

4 MR Providing & Fixing of urinal Partition full height urinal partition with 8mm frosted

glass , size 1950 x 600 mm to wall flange complete including cutting and making

good the walls and floors complete wherever required. Each 2 11,741.00 23,482.00

5 Providing & Fixing of stainless steel sink with C.I. brackets, duly painted 40 mm

C.P. waste, C.P. brass chain and rubber plug, 40mm C.P. cast brass bottle trap

with pipe to wall and C.P. wall flange, rubber adopter for waste connection

complete, including cutting and making good the walls and silicon filling in the gap

between the sink and stone, wherever required. -

MR Double Bowl with Double Drain Board Each 1 8,850.00 8,850.00

6 MR Providing & Fixing of 15mm C.P brass mixing fitting for kitchen sink with swinging

spout complete. Including cutting and making good the walls wherever required

.C.P. brass mixing fitting . Each 1 5,723.00 5,723.00

7 MR Providing & Fixing of C.P. brass Pressmatic type Pillar Cock complete as required.

8 MR Providing & Fixing of 15 mm dia C.P brass angle valves with S.S. mesh filter and

C.P. cast brass wall flange.with extention piece in required length. Each 16 1,829.00 29,264.00

9 MR Providing & Fixing of 15 mm dia Pvc connector 450mm long with connecting nuts

for connection to Mixers & taps from angle valve. Each 16 295.00 4,720.00

10 MR Providing & Fixing of C.P. brass squre towel ring with C.P. brass wall brackets &

CP brass screws complete as required. Each 0 1,239.00 -

11 MR Providing & Fixing of bevelled edge mirror of superior glass (of approved quality)

complete with 6mm thick (900x750 mm) asbestos sheet (ground) fixed to PVC rawl

plugs with C.P. brass screws and washers complete. Each 2 5,900.00 11,800.00

12 MR Providing & Fixing of 15 mm dia C.P. Ablution health faucet with 1.0 m long SS

extension pipe with wall hook and operating knob complete in all respects.

13 MR Providing & Fixing and fixing C.P. brass twin coat hooks fixed on toilet door with

C.P. brass screws including all fittings complete. Each 3 1,003.00 3,009.00

14 MR Providing & Fixing Recessed type S.S. toilet paper holder including cutting and

making good the walls. Each 3 2,183.00 6,549.00

15 MR Providing & Fixing Liquid soap dispenser including cutting and making good the

16 MR Providing & Fixing stainless steel wall mounted Paper Towel Dispenser including

cutting and making good the walls. Each 4 7,375.00 29,500.00

B. SUB HEAD - II : INTERNAL DRAINAGE RAINWATER, SOIL WASTE PIPES &

1 Providing and fixing PVC SWR ( Soil , Waste & RWP ) pipes , Type-B (IS: 13592 )

including all fittings (plain or door) e.g. bends, junction, cowls, offsets, access

pieces, clean out plug, jointing with rubber ring/solvent cement joints including

cutting chase or holes in walls and floors and making good wherever required.

2 Providing & fixing in position upvc P"or S" trap of self cleaning design of following

sizes for the embedded areas Making proper connection with chemical sealent

joint , cutting chase / hole in floors /slabs and bringing the same in proper condition

in cement concrete 1:2:4 mix complete as required. including cost of cutting and

making good the walls and floors where required.

2.1 MR 110 mm inlet and 110 mm outlet Each 6 767.00 4,602.00

3 Providing & fixing in position upvc floor drain including cost of cutting and making

good the walls and floors wherever required. -

3.1 MR 110 mm inlet and 50 mm outlet Each 1 413.00 413.00

Digitally signed by AVDHESH

S.No. Sch No. Description Unit QTY Rate MR Amount

4 Providing and fixing uPVC waste pipes for WB , SINK , URINAL , FD (IS: 4985

Class A) including all fittings (plain or door) e.g. bends, junction, cowls, offsets,

access pieces, jointing with rubber ring/solvent cement joints including cutting chase

or holes in walls and floors and making good wherever required.

4.1 MR 32 mm dia pipe Metre 50 619.50 30,975.00

4.2 MR 40 mm dia pipe Metre 25 826.00 20,650.00

5 Providing and fixing Stainless steel grating with including fixing to the floor with

cement mortar. -

6 MR Providing and fixing UPVC inlet fitting with maximum 3 inlets 32,40 or 50 mm size

fabricated from 110 mm dia UPVC pipes and fixed to upvc sockets,fixed to upvc

trap with chemical sealent joint and set in cement concrete as per standard drawing

complete. Each 6 590.00 3,540.00

C. MR SUB HEAD - III : INTERNAL WATER SUPPLY -

1 Providing and fixing Composite PeX-Alu-PE pipe ( Silver ) Crosslinked high

density polyethylene interior, butt welded aluminium middle layer and

polyethylene outer coating complete with all fittings such as sockets, bends,

elbows, tees, reducers, unions,Flanges etc. necessary adapters for GI/Copper and

CP fittings. Clamps with hanger at a spacing as required , including cost of cutting

chases & holes in wall and making good the same in cement mortar 1 : 2 (1 cement

: 2 coarse sand) including testing of joints complete as per direction of Engineer-in-

charge. (For Concealed work )

Concealed work, including cutting chases and making good the walls -

1.1 MR 15 mm nominal bore Metre 25 1,416.00 35,400.00

1.2 MR 20 mm nominal bore Metre 20 1,770.00 35,400.00

1.3 MR 25 mm nominal bore Metre 15 2,596.00 38,940.00

2 MR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply and all CPVC plain & brass threaded fittings,

including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge. (For Concealed in Toilet) For Exposed in

Shaft & Terrace -

2.3 MR 25 mm nominal bore Metre 40 472.00 18,880.00

2.4 MR 32 mm nominal bore Metre 40 619.50 24,780.00

2.5 MR 40 mm nominal bore Metre 50 826.00 41,300.00

2.6 MR 50 mm nominal bore Metre 50 1,062.00 53,100.00

4 Providing and fixing Ball valve with hard chrome plated ball inside PTFE (Teflon)

seat & ring with chrome plated centre handle with female BSP threads complete in

all respects. -

4.2 MR 25 mm nominal bore Each 20 1,416.00 28,320.00

4.4 MR 32 mm nominal bore Each 4 1,770.00 7,080.00

4.5 MR 40 mm nominal bore Each 2 2,596.00 5,192.00

4.6 MR 50 mm nominal bore Each 2 4,130.00 8,260.00

5 Providing, fixing, testing and commissioning of motorized butterfly valve of following

dia for filling of overhead water tank complete with high and low level control

switches to control tanks. The level controllers shall be installed in overhead tanks.

The level switch will close the valve when water level is high in overhead tank and

open the valve when overhead water tank level is low. The system should be

complete in all respects with accessories 220 V AC / 24 V DC, IP67 electrical water

level control unit, copper control wiring in whether proof casing etc.

Correction factor on DSR-2023 @0.973 53,163.46

Digitally signed by AVDHESH

NAME OF WORK :- INTERIOR AND OTHE CIVIL MISC. WORKS OF MULTI-PURPOSE

HALL AT ILBS RESIDENTIAL COMPLEX, VASANT KUNJ, DELHI.

TOTAL AMOUNT(IN RS.)

TOTAL AMOUNT(IN RS.)

S.No. Description

I SUB HEAD - I: MAIN BOARDS - 1,13,099.61

II SUB HEAD - II: CIRCUIT CUM POINT WIRING 7,63,198.97 -

III SUBHEAD - III - FITTINGS & FIXTURES 71,564.00 74,632.47

IV SUBHEAD - IV - DISTRIBUTION BOARDS 28,715.00 -

V SUBHEAD - V- UPS SYSTEM 1,09,793.00 -

VI SUB HEAD -VI - EARTHING SYSTEM 19,938.00 -

VII SUB HEAD - VII - LT CABLES 4,474.00 31,373.71

SUBTOTAL (DSR-2025 & MR) 12,16,788.76

Digitally signed by AVDHESH

NAME OF WORK :- INTERIOR AND OTHE CIVIL MISC. WORKS OF MULTI-PURPOSE HALL AT ILBS RESIDENTIAL COMPLEX, VASANT KUNJ, DELHI.

BILL OF QUANTITIES - ELECTRICAL

S.No. Description Unit Qty Rate Amount

DSR-2025 NSI DSR-2025 NSI

SUB HEAD - I: MAIN BOARDS

Supplying, installing, testing & commissioning of following type compartmentalised wall mounted /

floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly

1 phosphatized & powder coated inclusive of suitable size 4 strip Al. Busbar complete with

interconnection providing Lugs, inter-earthing, painting etc. i/c providing & fixing below noted

NSI-1 MDB PANEL

1 No. 100A 4P MCCB ,25 kA breaking capacity with thermal release and adjustable setting and

with rotary handle.with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along

with control SP MCB

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 set of ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with control SP

1 Set of 125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

1 Nos. 63A FP MCCB, 15kA breaking capacity with thermal release and adjustable setting and

with rotary handle.

3 Nos. 63A FP MCB ,10 kA breaking capacity,

3 Nos. 40A FP MCB, 10 kA breaking capacity

3 Nos. 40A SPN MCB ,10 kA breaking capacity

Supplying,Receiving, fixing, testing & commissioning of above described Panel Sets 1 1,13,100 1,13,099.61

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - I - 1,13,099.61

SUB HEAD - II: CIRCUIT CUM POINT WIRING

SWITCH CONTROL LIGHT POINTS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1 DSR 1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. .

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single

2 DSR-1.55 core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

3 DSR 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC Metre 160 373 59,680.00

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR

4 DSR 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required.

4.1 DSR 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 430 267 1,14,810.00

4.2 DSR 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 0 311 -

4.3 DSR 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 240 482.00 1,15,680.00

4.4 DSR 1.14.5 2 x 10 sq. mm + 1 x 6 sq.mm earth wire Metre 47 621 28,919.97

DSR 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

DSR 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

5 DSR 1.31 recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular Each 13 545 7,085.00

switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to be used in non residential

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

9 DSR 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each 2 659 1,318.00

modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in

10 DSR-1.57 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Each 8 807 6,456.00

curve including connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including Digitally signed by AVDHESH

connections etc. as required. Date: 2025.09.15 18:41:04

S.No. Description Unit Qty Rate Amount

DSR-2025 NSI DSR-2025 NSI

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

11.1 DSR 1.24.6 Telephone socket outlet 0 168 -

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

12.1 DSR 1.27.1 1 or 2 Module (75mmX75mm) Nos 2 354 708.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

13.1 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 2 136 272.00

13.2 DSR 1.24.1 5/6 amps switch Each 2 121 242.00

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

14 DSR 1.21surface/recess including cutting the wall and making good the same in case of recessed conduit

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - II 7,63,198.97 -

SUBHEAD - III - FITTINGS & FIXTURES

1 NSI-1 Supply, Installation, Testing and Commissioning of 9 W Bulk head Light. Each 9 1,568.31 14,114.83

2 NSI-2 Supply, Installation, Testing and Commissioning of 5W Mirror Light. Each 2 603.20 1,206.40

Supplying, installation, Testing & Commissioning of LED Down lighter (COB Type) (System

lumen efficacy ≥ 105< 120lm/Watt), Recessed/ surface Down lighter (Round/ square/

Rectangular) COB Type of following body material and construction as per IS : 10322 with driver

as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge

protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20,

CRI >80 ,UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time

(LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial

Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI

Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should

not more than the specified rating and Fixture shall be confirming to relevant BIS standards and

trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing Complete in all respect i/c external connections with 1.5 sq mm

3 DSR-8.4 FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required

with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output .

LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature

shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim

with Aluminium Reflector cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and

all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall

be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C) Powder

coated die cast /Extruded aluminium Body including trim with aluminium Reflector

Supplying, installation, Testing & Commissioning of LED (surface/wall) mounted LED Batten light

(System lumen efficacy ≥120 <135 lm/Watt) following body material and construction as per IS :

10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating

voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade,

internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95,

IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical

circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till

life ends,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum power consumption should not more than the specified

rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

4 DSR-8.10 Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must

have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in

all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper

conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.

System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing

required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C). Powder

coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

5 NSI-3 Supply, Installation, Testing and Commissioning of 250 mm dia Domestic Exhaust Fan Each 2 2,825.38 5,650.76

Digitally signed by AVDHESH

6 NSI-4 Supply, Installation, Testing and Commissioning of 300 mm dia Wall Fan Each 8 Date: 2025.09.1524,706.99

S.No. Description Unit Qty Rate Amount

DSR-2025 NSI DSR-2025 NSI

Supplying, installation, testing and commissioning of Spyke light fitting suitable for 8 watt IP

7 NSI-5 65LED having system lumen output of minimum 750 lumens complete with all accessories and Each 4 7,238.37 28,953.50

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - III 71,564.00 74,632.47

SUBHEAD - IV - DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

1.1 DSR 2.3.1 6 way, Double door Each 0 2,390 -

1.2 DSR 2.3.2 8 way, Double door Each 0 2,773 -

1.3 DSR 2.3.3 12 way, Double door Each 1 2871 2,871.00

Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board,

415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din

bar, detachable gland plate, interconnections, phosphatized and powder painted including

earthing etc. as required. (But without MCB/ RCCB/ Isolator)

2.1 DSR 2.4.1 4 way (4 + 12), Double door Each 0 4,377 -

2.3 DSR 2.4.3 8 way (4 + 24), Double door Each 0 6,337.00 -

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A

tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without

MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

3.1 DSR 2.5.3 12 way (4 + 36), Double door Each 0 13,512 -

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

4 DSR 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

4.2 2.10.2 Single Pole Neutral Each 643 -

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

7 DSR 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - IV 28,715.00 -

SUBHEAD - V- UPS SYSTEM

Online UPS - Input supply: Single Phase, Output Supply : Single Phase

Digitally signed by AVDHESH

S.No. Description Unit Qty Rate Amount

DSR-2025 NSI DSR-2025 NSI

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power

Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase

input,Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank

suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA

of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container)

and Static Bypass switch alongwith provision for manual bypass, suitable isolation transformer for

additional protection against neutral faults etc. The UPS systems shall be Microprocessor based

Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter

with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and

inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE.

The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current

total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at

100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be

include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS

shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading

power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz

and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz,

Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40

deg C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter

distance,Protection for Under voltage, over voltage, abnormal output voltage, battery over

charging, output over current, short circuit, battery deep discharge , 10 KV surge. Display for

watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage

electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall

be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) .

The UPS should be with IGBT Based Inverter Technology, Communication RS232/RS485/SNMP

port open protocol for BMS integration as per approved by Engineering in charge. Required

battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of

suitable size and connectors and all required accoseries are inclusive in the cost. The UPS

should have QR code which should contain drawing, test report OEM manual,Geo- Tag of

manufacturing location etc

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - V 1,09,793.00 -

SUB HEAD -VI - EARTHING SYSTEM

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,

1 DSR 6.1 having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. Sets 2 609 1,218.00

complete as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface/ recessed conduit/ submain wiring/ cable as required.

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - VI 19,938.00 -

SUB HEAD - VII - LT CABLES

Laying of one number PVC insulated & PVC sheathed/ XLPE Power cable of 1.1 KV grade of

following size in the existing RCC/HUME/METAL pipe as required.

1.1 DSR-10.5.2 Above 35 sq. mm and upto 95 sq. mm RM 50 72 3,600.00

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall

2 NSI PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical

specifications.

Supplying and making end termination with brass compression gland and aluminium lugs for

3 DSR 11.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

DSR 3½ X 35 sq. mm (32mm)

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - VII 4,474.00 31,373.71

Digitally signed by AVDHESH

Project :- DETAIL ESTIMATE FOR ILBS MP HALL OF INTERIOR, EXTERIOR AND STRUCTURAL ADDITION AT VASANT KUNJ, DELHI

BILL OF QUANTITIES -SPLIT AC

S. No. Description UNIT QTY Rate AMOUNT

1 HI WALL SPLIT UNITS

Supply, Installation, testing and commissioning of Air-cooled Hi-wall split air conditioners each comprising an

outdoor unit(s) consisting of inverter driven compressor, air cooled condenser, condenser fan along with

Cooling thermostats etc. with outer casing and indoor fan coil unit consisting of centrifugal fans, fan motor,

DX cooling / Heating coil, outer casing, filter, control and power panel with remote etc. entire cabling and wiring

from indoor to outdoor, insulation and with full charge of refrigerant gas and oil, supports, canvas connection

etc. . The indoor and outdoor units shall be with structural steel supports, angles, rods etc. The quoted price

shall also include 24 G soft copper refrigerant piping with 13mm "O" class factory backed nitrile rubber with

aluminium foil from outdoor unit to indoor unit complete with insulation, refrigerant charging, PVC drain piping

with 6mm thick nitrile rubber insulation, supports, clamps, fittings, connections, sleeves, supports,Stand, MCB,

stabilizer etc from main panel to the unit. The refrigerant used shall CFC Free R-410 A.

TOTAL AMOUNT 9,07,400.00

TOTAL AMOUNT 9,07,400.00

Digitally signed by AVDHESH