REPAIRING, RECANNING, REPAINTING AND POLISHING OF VARIOUS CHAIRS, STEEL AND WOODEN FURNITURE AT MIL STN JAISALMER AND POKARAN

Amount

Almirah Large Steel (FD-67(M) , FD-1031)

M&L for removing of old broken/unserviceabble shelves from Almirah large steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engineer-in-charge.

M&L for replacement of broken/dacayed legs from existing Almirah Large steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M & L for removing of old unserviceable locking device three way from existing Almirah Large steel and S&F new locking device made out of 10 mm MS bar round and 3 mm MS plate all as per site requirement and directed by Engineer-in-charge

M & L for removing of broken/unserviceable handle with bush from existing almirah large steel and S&F new Chromium plated steel handle with bush all as specified in drg & directed by Engineer-in-charge.

M & L for removing of old unserviceable lock from existing almirah large steel and S&F new lock all as specified in drg & directed by Engr-charge

S&F new cleats made out of 2 mm thick sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Almirah Large steel all as specified & directed by Engineer-in-charge.

Almirah Small Steel (FD-1032)

All as per item Ser No 1.01 above but shelves for Almirah small steel.

All as per item Ser No 1.02 above but legs for Almirah small steel.

All as per item Ser No 1.03 above but locking devise for Almirah small steel.

All as per item Ser No 1.04 above but handle with bush for Almirah Small Steel.

All as per item Ser No 1.05 above but lock for Almirah small steel

All as per item Ser No 1.06 above but cleats for Almirah small steel.

All as per item Ser No 1.07 above but painting to Almirah small steel.

Locker Bed Side Steel (FD-1029)

M/L for removing of old unserviceable hasp and stapple from existing Locker bed side steel and S&F new CP hasp and stapple of size 75 x 40 x 3 mm as specified in drg and directed by Engineer-in-charge

M&L for removing of old unserviceable handle from existing Locker bed side steel and S&F new CP handle 100 mm long as specified in drg and directed by Engineer-in-charge

M & L for removing of old unserviceable hanging pipe from existing Locker bed side steel and S&F new 20 mm dia CP steel conduit pipe with 02 Nos socket as specified in drg and directed by Engineer-in-charge

M&L for removing of broken/dacayed legs from existing Locker Bed Side steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M&L for one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Locker bed side steel all as specified & directed by Engineer-in-charge.

Table Office Clerk Steel {FD-84(M) & FD-1004}

M&L for removing old u/s tops from Table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading fixedwith fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of unserviceable drawers from existing table office clk steel and S & F new drawers made out 1 mm thick MS sheet all as specified in drg & directed by Engineer-in-charge.

Removing of old unserviceable lock from existing table office clk steel and S&F new lock all as specified in drg & directed by Engineer-in-charge..

M&L for one coat of synthetic enamal paint OG to all steel Surface after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Table office clk steel all as specified & directed by Engineer-in-charge.

Table Office Officer Steel {FD-84(M) & FD-1003}

All as per item Ser No 4.01 above but Top of Table office Offr steel.

All as per item Ser No 4.02 above but drawers of Table office Offr steel.

All as per item Ser No 4.03 above but Lock of Table office Offr steel

All as per item Ser No 4.04 above but painting to Table office Offr steel

Table Dining ORs {FD-165(M)}

M&L for removing of old u/s top of Table Dining OR and S&F new top made out of 18mm thick block board with 22 gauge aluminim sheet, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing the unserviceable front/rear top rail/bottom middle stiffener of table Dining ORs and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing the unserviceable top side rails/bottom side stiffener of table Dining ORs and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing the unserviceable legs of table Dining ORs and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to table dining OR after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel With Arms {FD-75 (M)}

M&L for removing of old/broken flat iron from existing Chair CB steel with arms and S&F new flat iron 25 x 3 mm of required length shall be welded with seat of chair CB Steel with arms complete all as specified and directed by Engineer-in-charge.

M&L for removing of U/S seat from existing Chair CB steel with arms and S&F new seat made out of 2nd class Shisham wood duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M&L for removing of U/S back rest from existing Chair CB steel with arms and S&F new back rest made out of 2nd class Shisham wood duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken arms rest from existing Chair CB steel with arms and S&F new arms rest made out of 1st class teak wood without crack and knots duly black stove polished fix with screw steel all as specified and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to Chair CB steel with arms after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel Without Arms {FD-75 (M)}

All as per item ser No 7.01 above but flat iron for Chair CB steel without arms

All as per item ser No 7.02 above but seat of Chair CB steel without arms

All as per item ser No 7.03 above but back of Chair CB steel without arms

All as per item ser No 7.04 above but painting of Chair CB steel without arms

Chair Varandah (FD-256)

M&L for removing of wornout U/S cane/Nylon newar of chair varandah and one coat of synthetic enamal paint white after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required, all as specified and directed by Engineer-in-charge.

M&L for recanning with new standared 3.5 mm wide white plastic cane of semi circular type in mat pattern and all as directed by Engineer-in-charge.

Charpoy GI Nylon Newar (FD-220) and Charpoy GI with ply top {FD-220(R)}

M&L for removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade incl threading both sides all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail retervied from ser item No 10.01 above incl threading both side & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy and making leg from old u/s short rail retervied from ser item No 10.02 above incl threading, S&F 6mm MS plate in bottom and 25 x 3mm of MNF clamp (2 Nos each leg) to be welded with legs & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old broken/damaged chuk nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge

M&L for removing old broken/damaged GI elbow 3 way 32 mm bore and S&F new GI elbow 3 way 32mm bore (ISI marked) to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge.

M&L for tightening of loose charpoys after removing of US plywood from existing GI charpoy and S&F of New 12mm thick plywood, ISI Mark, BWR Grade of size 1980MM x 900MM by fixing with 8 nos nut and bolt of size 40 X 6 mm with GI washer, Teak wood beading 4mm thick half round moulded shall be provided alround the plywood top. all as specified & directed by Engineer-in-charge.

Charpoy IP/MS with Hard top (FD/E6/MAP-II/01)

M&L for removing of damaged/broken long rail from charpoy MS hard top and S&F new long rail made out of MS pipe 65 x 25mm, 1.6mm thick (ISI marked) incl welding to existing charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy MS Hard top and S&F new short rail made out of MS pipe 65 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy MS Hard top and S&F legs made out of MS pipe 38 x 38, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken support/stiffener from charpoy MS Hard top and S&F new support/stiffener made out of MS pipe 25 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to charpoy MS Hard top after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

M&L removing of US plywood from existing charpoy MS Hard top and S & F New 12mm thick ply, ISI Mark, BWR Grade of size 1980 MM x 900MM by fixing with 10 nos nut and bolt of size 50 X 3 mm complete all as specified & directed by Engineer-in-charge.

Form without back FD-1027

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required to Form without back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks sheesham without crack and knots of size 1900 x 255 x 25 mm and fixing the same with GI Nuts & bolts to Form Without back all as specified & shown in drg

Rack side 3/4 space steel (FD-1023)

M&L for one coat of synthetic enamal paint OG to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required to Rack side 3/4 spaces steel all as specified & directed by Engineer-in-charge.

Table 1520 x 860 x 760mm (FD-1010)

M&L for removing old u/s tops from Table steel 1520 x 860 x 760mm and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4 mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 1520 x 860 x 760mm and S&F new front/rear top rail/bottom middle stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 1520 x 860 x 760mm and S&F new top side rails/bottom side stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable legs of table steel 1520 x 860 x760 mm and S&F new legs made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

Bed Hard wooden with Ply Wood Top (FD-246 )

M&L for removing of u/s headrest and S&F New headrest of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified and shown in drg and directed by Engr -in-charge.

All as per item No 14.01 above but footrest of Bed hard plywood Top, rest all as per drg and directed by Engr -in-charge.

M&L for removing of u/s long rail and S&F of new long rail made out of Ist class Sheesham wood with crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of u/s support/Stiffener and S&F of new support/stiffener made out of 1st class Sheesham wood without crack and knots rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old u/s ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade rest all as specified in drg and directed by Engr -in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of bed hard rest all as directed by Engr -in-charge.

Chair Dinning (FD-228, FD-279.)

M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg.

Rear leg as specified & shown in drg.

Stiffener as specified & shown in drg.

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining and as directed by Engineer-in-charge

Chair Easy (FD-171, FD-209, FD-229)

M&L for removing of old broken components of chair easy and S&F new component made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Seat rails as specified & shown in drg.

Back rails as specified & shown in drg.

Arms as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair easy and as directed by Engineer-in-charge.

Chair Writing (FD-280)

M&L for removing of old broken components of chair writing and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape ,planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Stiffener as specified & shown in drg

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Arms as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair writing and as directed by Engineer-in-charge.

Peg Table (FD-266, FD-277, FD-384)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 18mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround and all as specified & shown in drg.

M&L for removing of old unserviceable legs and S & F new leg made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 19.02 above, but front & rear rail, rest all as per drg.

All as per item No 19.02 above, but bottom side stiffener, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of peg table and as directed by Engineer-in-charge.

Sofa set 5 Seater/4 Seater/3 Seater/2 Seater/1 Seater (FD-373)

M&L for removing of old broken components of Sofa Set and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified & shown in drg

Side rails of Seat/Back as specified & shown in drg

Stiffener of Seat/Back as specified & shown in drg

Front/Rear rails of seat sofa set 3 seater as specified & shown in drg

Front/Rear rails of seat Sofa 1 seater as specified & shown in drg

Top/Bottom rails of back Sofa set 3 seater as specified & shown in drg

Top/Bottom rails of back sofa set 1 seater as specified & shown in drg

M&L for replacement of old u/s foam cushion and S&F new foam cushion of size 530mm x 560mm" x 4" thick, 32 density of Cool foam or equivalent make of duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 5 Seater and as directed by Engineer-in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 2 Seater and as directed by Engineer-in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa chair 1 Seater and as directed by Engineer-in-charge

Table 600 x 600 x 760 mm (FD-293)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 18mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol around and as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 21.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 600 x 600 x 760 mm and as directed by Engineer-in-charge.

Table 900 x 900 x 760 mm (FD-291)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 18mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround and as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 22.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 900 x 760 mm and as directed by Engineer-in-charge.

Teapoy Wooden FD-382

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 18mm thick one side teak face other side white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing of old unserviceable legs and S&F new legs made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 23.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 23.02 above, but bottom side stiffener, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of teapoy wooden and as directed by Engineer-in-charge

Table writing FD-275 :

M&L for removing old u/s top and S&F new top for table writing made out of 18mm thick prelaminated particle board one side teak face other side white exterior grade (ISI marked) with 4mm teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 24.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 24.02 above, but side rails/bottom side stiffener rest all as specified and shown in drg.

All as per item No 24.02 above, but bottom middle stiffener rest all as specified and shown in drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for removing old u/s side purlin and S&F new side purlin all made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI marked) as specified & shown in drg.

M&L for removing old u/s back and S&F new back made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI marked) complete all as specified & shown in drg.

M&L for removing old u/s shutters and S&F new shutters complete made out of 18mm thick prelaminated particle board both side teak face exterior grade (ISI marked)all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table and as directed

Table centre , Table Centre two Tier ( FD-274)

M&L for removing of old u/s top and S&F new top for table centre made out of prelaminated particle board 18mm thick one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround, all as specified & shown in drg.

M&L for removing of old u/s top second Tier and S&F new top for second Tier for table centre tow tier made out of prelaminated particle board 18mm one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing of old u/s front/rear top rails and S&F new front/rear rails made out of 1st class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg.

All as per item No 25.03 above, but side top rails/bottom side Stiffener, rest all as per drg.

All as per item No 25.03 above, but legs, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table centre and as directed by Engineer-in-charge.

Table Dining 6 Persons (1500x900mmx760mm) FD-273 :

M&L for removing of old u/s top and S&F new top of size 1500 x 900 x 18mm thick for table dining 6 persons made out of prelaminated particle board one side teak and other side white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of Ist class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg

All as per item No 26.02 above, but side rails/Support, rest all as per drg.

All as per item No 26.02 above, but front/rear long rails, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table dining 6 person and as directed

Table 900 x 600 x 760 mm with and without drawer (FD- 283 , FD- 284)

M&L for removing old u/s top and S&F new top for table 900 x 600mm made out of 18mm thick prelaminated particle board one side teak face other side white laminated exterior grade (ISI marked) with 4mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg.

All as per item No 27.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 27.02 above, but front/rear long rails/ bottom middle Stiffener, rest all as per drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 600 and as directed by Engineer-in-charge

Table Dressing Gents with Mirror (FD-230)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 760 x 380 x 5.5mm duly framed made out of Ist class teak wood without crack and knots of size 25 x 20 mm & 6mm thick commercial ply on back and supported with batten 35 x 25mm all as specified & shown in drawing

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated particle board with drawer complete all as per drawing (back shall be 06 mm ply)

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engineer-in-charge

Table bed side (FD -248, FD-276)

M&L for removing of old broken side purlin of table bed side S&F new side purlin made out 18mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) duly fixed 4mm thick teak wood beading fixed with fevicol where ever reqd, as specified & shown in drg.

M&L for removing of old broken top/bottom/shelve of table bed side S&F new top/bottom/shelve made out 18mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) duly fixed 4mm thick teak wood beading fixed with fevicol where ever reqd, all as specified & shown in drg.

M&L for removing of old broken back of table bed side S&F new back for table bed side made out 6mm thick commercial ply wood, as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to beading of table bed side and as directed by Engineer-in-charge

Table Draughtsman FD-6(M) , FD-303

M&L for removing old u/s top and S&F new top for table Draughtsman made out of 18mm thick prelaminated particle board one side teak face other side white laminated exterior grade (ISI marked) with 4mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened and fixed with teak wood pinning and fevicolall as specified & shown in drg.

All as per item No 30.02 above, but side top rails all as specified & shown in drg.

All as per item No 30.02 above, but front/rear top rails all as specified & shown in drg.

All as per item No 30.02 above, but bottom side Stiffeners all as specified & shown in drg.

All as per item No 30.02 above, but foot rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table draughtsman and as directed by Engineer-in-charge.

Chair dining cushioned (FD/E6/MAP/10)

M&L for removing of old broken components of chair dining cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Vertical Strips as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining cushioned and as directed by Engineer-in-charge.

Mirror With Shelf (FD-404)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 355 x 455 x 5.5mm & frame made out of Ist class teak wood without crack and knots of size 25 x 18mm & 6 mm thick commercial ply on back including polishing the frame complete all as directed by Engineer-in-charge.

M&L for removing old u/s Shelf and S&F new Shelf of size 600 x 380 made out of particle board with 4mm thick teak beading and MS Bracket of Angle Iron of size 150x125 mm complete all as directed by Engineer-in-charge.

Chair wooden bottom (FD-225,FD-285 )

M&L for removing of old broken components of chair wooden bottom and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape , planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail as specified in drg

Back Rest as specified in drg

Seat of 8mm commercial ply wood as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair Wooden Bottom and as directed by Engineer-in-charge.

Chair Dining JCOs/OR (FD/MAP-II/05)

M&L for removing of old broken components of chair dining JCOs/OR and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape , planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail as specified in drg

Back Rest as specified in drg

PVC seat 4mm thick with holes and 4 x 10mm Ribs moulded alongwith seat rest all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining JCOs/OR and as directed by Engineer-in-charge.

Chair Draughtsman (FD-204)

M&L for removing of old broken components of chair Draudgtsman and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stifiner as specified in drg

Front/Side/Rear rail incl drilling of holes for caning as specified in drg

Back Rest as specified in drg

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair draughtsman and as directed by Engineer-in-charge

Table Dining 4 Pers (1200x900mmx760mm) FD-273 :

M&L for removing of old unserviceable top and S&F new top of size 1200 x 900 x 18 mm thick made out of prelaminated Particle board one side teak and other side white exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing unserviceable legs and S&F new legs made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

All as per item No 36.02 above, but top side rails/support, rest all as per drg.

All as per item No 36.2 above, but front/rear rails,rest all as per drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table dining 4 person and as directed by Engineer-in-charge

Rack Riffle 24 Rifles (HQ/134/F/22/89)

M&L for removing of old unserviceable upright post and S&F New upright post of of size 100 x 100 x 760mm made with 1st class teak wood without crack and knots , rest all as specified in drg and directed by Engr -in-charge.

All as per item No 37.01 above but horizental post and S&F new horizental post, made with 1st class teak wood plank rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable bottom planks and S&F new bottom planks of size 1920 x 390 x 38mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable top planks and S&F new top planks of size 1920 x 1500 x 38mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of rack rifle 24 rifles and as directed by Engineer-in-charge.

Rack Riffle 12 Rifles (HQ/134/F/22/89)

M&L for removing of old unserviceable upright post and S&F New upright post of of size 70 x 90 x 940 mm made with 1st class teak wood without crack and knots , rest all as specified in drg and directed by Engr -in-charge.

All as per item No 38.01 above but horizental post and S&F new horizental post, made with 1st class teak wood plank rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable bottom planks and S&F new bottom planks of size 900 x 180 x 30 mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable top planks and S&F new top planks of size 900 x 180 x 30 mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable 'L'shape strip of iorn and S&F new 'L'shape iorn strip of size 70 x 70 x 5 mm thick made out of iorn strip fixed with leg to bottom by 4 x 35 mm steel screw, rest all as specified in drg and directed by Engr -in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of track rifle 12 rifles and as directed by Engineer-in-charge.

Rack Riffle 10 Rifles (HQ/134/F/22/89)

M&L for removing of old unserviceable upright post and S&F New upright post of of size 100 x 100 x 760mm made with 1st class teak wood without crack and knots , rest all as specified in drg and directed by Engr -in-charge.

All as per item No 39.01 above but horizental post and S&F new horizental post, made with 1st class teak wood plank rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable bottom planks and S&F new bottom planks of size 790 x 190 x 30 mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable top planks and S&F new top planks of size 790 x 180 x 30 mm thick made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable 'L'shape strip of iorn and S&F new 'L'shape iorn strip of size 70 x 70 x 5 mm thick made out of iorn strip fixed with leg to bottom by 4 x 35 mm steel screw, rest all as specified in drg and directed by Engr -in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of rack rifle 10 rifles and as directed by Engineer-in-charge.

Bed Hard wooden with Ply Wood Top (FD-246,247 )

M&L for removing of old unserviceable head rest and S&F New head rest of bed hard plywood top made of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified in drg and directed by Engr -in-charge.

All as per item No 40.01 above but foot rest of Bed hard plywood Top, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable long rail and S&F new long rail made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable support/Stiffener and S&F new support/stiffener made out of 1st class teak wood without crack and knots rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade of make-National/Kit Ply/Century rest all as specified in drg and directed by Engr -in-charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of bed hard rest all as directed by Engr -in-charge.

Table Dressing Ladies with Mirror FD-251

M&L for removing old unserviceable looking mirror and S&F new looking mirror of size 1220 x 380, 5.5 mm thick duly framed made out of teak wood without crack and knots of 25 x 20 mm thick & 6mm thick commercial ply on back of mirror and supported with teak wood batten of size 45 x 40mm all as specified in drawings

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated Particle board with drawer and sliding channel with glass etc complete all as per drawing (back shall be 12 mm ply)

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engineer-in-charge

TV trolley FD-E6/MAP/04

M&L for removing old unserviceable side purlin and S&F new side purlin made out of 18mm thick prelaminated Particle board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable Top/bottom/shelve and S&F new Top/Bottom/Shelve made out of 18mm thick prelaminated Particle board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable Back and S&F new Back made out of 18mm thick prelaminated Particle board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable glass openable shutter and S&F new glass openable shutter of size 630x655x5.5 mm thick with four Nos of nylon washer and two nos steel hinges Godraj pattern, all as specified in drawings.

M&L for removing of old unserviceable magnetic catcher and S&F new magnetic catcher all as per drg.

M&L for removing of old unserviceable caster wheel and S&F new caster wheel all as per drg.

Stool dressing cusioned (FD-E6/MAP/14

M&L for removing of old broken components of stool dressing cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Leg as specified in drg.

Front/Rear top rails as specified in drg

Side top rails as specified in drg

Bottom side stiffiner as specified in drg.

Bottom middle stiffiner as specified in drg.

Top of commercial plywood 350mm x 250mm x12 mm thick as specified in drg

M&L for replacement of old unserviceable foam cushion and S&F of new foam cushion of size14" x 10" x 2" thick 32 density of cool foam or equivalent make duly covered with tapestry cloth as specified in drg.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of stool dressing cushioned and as directed by Engineer-in-charge

Stool dressing CB (FD-282)

M&L for removing of old broken components of stool dressing CB and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Leg as specified in drg.

Front/Rear top rails incl drilling of holes for caning as specified in drg as specified in drg

Side top rails incl drilling of holes for caning as specified in drg as specified in drg

Bottom side stiffiner as specified in drg.

Bottom middle stiffiner as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of stool dressing cushioned and as directed by Engineer-in-charge

Bin Soiled Linen Multipurpose (FD/E6/MAP/09)

M&L for removing of old unserviceable top of Bin Linen multipurpose and S&F new top made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg

M&L for removing of old unserviceable side purlin of Bin Linen multipurpose and S&F new side purlin made out 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Shutter of Bin Linen multipurpose and S&F new Shutter made out 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Drawers of Bin Linen multipurpose and S&F new Drawers made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Bottom/shelves of Bin Linen multipurpose and S&F new Bottom/Shelves made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for Removing of old unserviceable Back support of Bin Linen multipurpose and S&F new Back support made out of 12 mm commercial ply all as specified in drg.

Side Board Small (FD-371)

M&L for removing of old unserviceable top of side board and S&F new top made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg

M&L for removing of old unserviceable side purlin of side board and S&F new side purlin made out 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Shutter of side board and S&F new Shutter made out 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Drawers of side board and S&F new Drawers made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Bottom/shelves of side board and S&F new Bottom/Shelves made out of 18mm thick prelaminated Particle board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for Removing of old unserviceable Back support of Side Board and S&F new Back support made out of 12 mm commercial ply all as specified in drg.

Hat Stand with Mirror (FD-361, FD-362, FD-233)

M&L for Removing of old/unserviceable Back ply of Hat Stands with Mirror and S&F new back ply with 6mm thick commercial ply all as specified in drg.

M&L for Removing of broken looking mirror of Hat Stand with Mirror and S&F new looking mirror of size 440 x 300mm , 5mm thick duly framed with 20 x 50mm wooden frame all as specified in drg .

M&L for Removing of old/unserviceable Veneer of Hat Stand with Mirror and S&F new 4 mm thick teak veneer ply all as specified in drg.

M&L for Removing of old/unserviceable around's beading of Hat Stand with Mirror and S&F new beading around Hat Stand with Mirror made out of 1st class teak wood without crack and knots of 6 x 35mm size all as specified in drg.

M&L for Removing of old/unserviceable Pegs and S & F copper oxidised steel Pegs 4" size for Hat Stand with mirror all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surfcae and polishing two coat of french polish to Hat Stand with Mirror and as directed by Engr -in-charge.

Chair dining long back (FD-357)

M&L for removing of old broken components of chair Dining Long back and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear portion including leg, back side, cushion & tapestry cloth complete as specified in drg

Stifiner as specified in drg

Front/Side/Rear rail as specified in drg

Cushioned Seat with tapestry cloth as specified in drg

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining long back and as directed by Engineer-in-charge.

Chair Easy Cushioned (FD-358)

M&L for removing of old broken members of chair easy cushioned and S&F new members made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified in drg

Seat rails as specified in drg.

Back rails as specified in drg.

Arm with cushion as specified in drg .

M&L for replacement of old unserviceable foam cushion fraom seat and S&F of new foam cushion of size 420mm x 445mm x 75 mm thick, 32 density of Cool foam or equivalent make duly covered with tapestry cloth/Synthetic Leather as approved by GE.

M&L for replacement of old unserviceable foam cushion fraom back and S&F of new foam cushion of size 420mm x 445mm x 50 mm thick, 32 density of Cool foam or equivalent make duly covered with tapestry cloth/Synthetic Leather as approved by GE.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair easy cushioned and as directed by Engineer-in-charge.

Chair for table cards (FD-353)

M&L for removing of old broken components of chair for table cards and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth as approved by GE.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining cushioned and as directed by Engineer-in-charge.

Table Card 900 x 900 x 760 mmFD- 352

M&L for removing of old unserviceable Particle board and baize green/ Red cloth and S&F new Particle board 18 mm thick duly covered with baize green/ Red cloth and also covered with teak wood for two front side rail 850 x 50 x 20 mm and two side rails of 900 x 50 x 20 mm of same size all as specified in drg and directed by Engr -in-charge.

M&L for removing old unserviceable legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified in drg.

All as per item No 51.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 51.02 above, but front/rear long rails/ bottom middle Stiffener , rest all as per drg.

M&L for removing old unserviceable drawers and S&F new drawers complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 600 x 760 and as directed by Engineer-in-charge

M&L for removing old decayed cane plastic of any size and re-canning with new cane (Superior quality) white colour of chair easy, chair Dining, Chair writing and stool dressing CB, etc with 2mm wide half rounded cane and 3.5mm cane in perimeter as per Godrej pattern and all as directed by Engineer-in-charge.

S&F 1st class teak wood Corner of size 100 x 100 x 25mm thick to be fixed with 60mm steel screw between the legs and top rails of Table dining 8 Pers/6 Pres/4 Pers, Table 900 x 900 x 760mm, Table draughtsman, Tale 600 x 600 x 760, table 900 x 600 with and without drawer etc and as directed by Engineer-in-charge

S&F 1st class teak wood Corner of size 75 x 75 x 25mm thick to be fixed with 60mm steel screw between the legs and rails of chair Dining, Chair writing, Chair easy, Peg table, Teapoy, Table Centre etc and as directed by Engineer-in-charge

Supply and fix knob for drawers and shutters of Table writing, Table 900 x 600 with drawer, Table dressing Gents etc. All as specified and shown in drg or as directed by Engineer-in-charge.

Supply and fix FI Clips for Dressing Mirror Gents and Mirror with shelve etc. All as specified and shown in drg or as directed by Engineer-in-charge.

M&L for spot Welding of steel items of broken joints etc including scraping preparing surface of welded pertion by grinding and buffing to make fit for painting and applying two coatt of synthetic enamal paint of same shade complete all as specified and directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from chair verandah and S&F new hard rubber shoe 20mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Table Office Officer steel , Table office clerks steel, Table dining ORs, Form with/without back and S&F new hard rubber shoe 25 x 25mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Charpoy MS Hard Top and S&F new hard rubber shoe 32 x 32mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe and Cap from Chair CB Steel with/Without Arm and new hard rubber shoe all as as specified and shown in drawing

Supply and fix hard rubber rings at the bottom of Legs of chair dining, chair dining JCOs/OR, Chair writing, chair dining cushioned, chair easy, chair easy cushioned, chair dtmn etc complete all as specified and directed by Engineer-in-charge.

Supply and fix hard rubber rings at the bottom of Legs of Table Dining, Table 900 x 900 x 760mm, Table 900 x 600 x 760mm, Table Centre, Sofa Sets and Peg table etc complete all as specified and directed by Engineer-in-charge.

Shri Maruti Trading Co.

SK INDUSTRIES

F.M. KHAN SONS