82616 SPECIAL REPAIRS TO COMPOUND WALL WITH CONCERTINA COIL AT NOFRA-II MEENAMBAKKAM UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc including from posts embedded in PCC of any size and thickness complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish from the site complete all as specified and directed.

Dismantling of barbed wire fencing of any type and size complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc. and getting out for hard/dense soil complete all as specified and directed

Material and Labour for PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) in foundation,filling and mass concrete complete all as specified and directed.

Material and labour for Brickwork with sub class- B bricks old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M & L for PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate ) in coping of including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for Broken glass coping on top of wall with CM 1:3 complete all as specified and directed

Material and Labour for 15mm thick Rendering on brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for complete remaoval of exixting treatment on surface of wall by washing rubbing down scraping down and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Supply and fix for mild steel rolled section as fencing posts,vertical posts etc (beam,angle,tee section channel or flat section ) and similar work including neccesary cutting drilling of size etc conforming to Fe-410-W Gde E-250 Qty-A complete all as specified and directed.

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W Gde E-250 Qty-A complete all as specified and directed.

M&L mild steel TMT round bars Fe 410W (Gde E-250) quality-A, 8mm dia cut to length, bent to shape required, and hooking ends and welding where required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed.

Supply and fix in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F for razor blade galvanised punched type concertina coil of dia 610mm when stretched with No. of circles 50, No. of clips 230 with weight 8.75 + 5% kg/coil and recommended and average coverage area is 6.00 RM/coil. with a galvanised coating thickness of 12 micron fixed in position and secure to both sides of shaped angle iron post 2.642 mm GI wire complete all as specified and directed.

M & L for removing excavated material to a distance exe 500m but n exe 1.5 Km and depositing where directed at alevel n exe 1.5m above starting point complete all as specified and directed.

RMK INDUSTRIES (BID ID -3100504)

JANANIKARTHIK ENTERPRISES (BID ID -3099912)

kvs constructions (BID ID -3099773)

Sri Sankar Enterprises (BID ID -3114667)

JVM Construction (BID ID -3096714)

Sri Lakshmi and Company (BID ID -3098134)