Construction of 0.80mtr span RCC Culvert /Edge wall , WBM Gr-III and 20mm thick OGPC on link road from Kulley to Sakha Peer Block Marh Jammu (L 1.75Km) (under State plan )

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : including all leads lifts and carriage Complete Job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all leads lifts and carriage Complete Job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all leads lifts and carriage Complete Job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)including all leads lifts and carriage Complete Job.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Above 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars

Providing and laying water bound macadam with spcified stone aggregate, stone screening and binding material, incl. sorting spreading to template and consolidation with Power Road Roller 8 to 10 tonne capacity Base course with 53mm to 22.4mm size including stone screening 11.20mm size (75mm thick)hand broken ( Finished work including material and labour) including all leads lifts and carriage Complete Job.

Providing and applying tack coat using hot straight run bitumen of gradeVG 30 including heating the bitumen, spraying the bitumen with manually cleaning and preparing the existing road surface as per specifications.on WBM @0.75Kg/Sqm including all leads lifts and carriage Complete Job.

20mm premix carpet surfacing with 1.80cum and 0.90 cu.m of stone chippings of 13.2mm size and 11.2mm size respectively per 100 sqm and 52 Kg. and 56 Kg. of hot bitumen per cu.m. of stone chippings of 13.2mm and 11.2mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete(tack coat to be paid for separately) with paving Asphalt VG 30 heated and then mixed with solvent at the rate of 70 grams per Kg. of asphalt. including all leads lifts and carriage Complete Job.

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128kg of bitumen of grade VG 30 bitumen per cum of fine aggreate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. including all leads lifts and carriage Complete Job.

Rajinder Kumar

Asha Singh