PROVN OF SORTING OUT SHED 03 FEET WALL, KOTA STONE FLOORING OVERHEAD COVER, WIRE MESH AND ELECTRICAL PTS AT 431 (I) SUP PL ASC AT FATEHGRH

Amount

Ecavating in trenhes in soft / loose soil n. exc. 1.5 m wide and not .exc. 1.5 m depth for foundation, cable laying etc and getting out complete all as specified and directed.

M&L for surface excavation in soft and loose soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mess concrete complete all as specified and directed.

M&L for brick work with sub class 'B' brick old size straight or curved on plan exc. 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L for design mix cement concrete M-25 as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs under- reamed piles and mass concrete etc complete all as specified and directed.

M&L for design mix cement concrete M-25 in beams cantilevers, bressumers, lintels band complete all as specified and directed.

M&L for design mix cement concrete M-25 slab supported on walls, columns in floors, roofs landings, balconies canopies deck slab and in the shelves and the like complete all as specified and directed.

M&L for design mix cement concrete M-25 as in column complete all as specified and directed.

M&L for form work as in sides of columns etc complete all as specified and directed.

M&L for form work as in roof beams, sides of suspended slabs etc complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter etc complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab for drain and similar work complete all as specified and directed.

S&F mild TMT steel bars 6 to 8 mm dia, cut to length, bent to shape required including cranking bending and binding with the mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending sprially for hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bars 05 mm dia and over an including 10 mm dia as in stirrups, cut to length bent to shape required including cranking bending sprially for hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for rendering 15 mm thik in CM (1:4) on fair faces of brick work or concrete surface to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of ceiling concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for prearation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkhali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for hardcore (broken stone) of gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 10 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection sub base of floors, surface channel of drain including necessary form work complete all as specified and directed.

M&L for PCC bed in (1:3:6) using 40 mm graded stone aggregate as in surface channel of drain including providing necessary form work complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in sub base of floors complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab in skirting 18-20 mm thick over 10 mm thick rendering in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing and polishing complete all as specified and directed.

S&F framed work of grade Fe 410 -W (Gde E-250) quality A as in doors or gates of angle or other section with gusset plates, rails, braes, framing for cladding, glazing wire netting and the like etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including mild steel hinges, mild steel hand made sliding bolt, mild steel handles mild steel hold fast and all necessary fittings (exclusive of steel sheeting or other covering) and hanging also fastening and fixing complete all as specified and directed.

S&F for expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

M&L for preparing new surfaces of steel and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Returing, filling including spreading, leveling, watering and well ramming in layers n.exc. 25 cm for soft / loose soil complete all as specified and directed.

Removing excavated materials (soil) not exc. 50 m and depositing where directed of a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibtratory compaction by using plate vibtrator filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks double layer ISI marked (cylindrical vertical with closed threaded top capacity in 1000 ltrs, hoisted and fixed in position with all fittings and fixtures including 20 mm ball valves high pressure of PTMT with eproxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified in SSR Part-I and directed.

S&F steel tubes medium grade bore of tube 15 mm galvanized with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

All as per item No.36 above but of size 20 mm bore

S&F gun metal gate valve 20 mm dial globe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with frame clamps complete all as specified and directed.

S&F PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and directed.

M&L for setting coat of 5 mm thick in cement plaster 1:2 trowelled to even and smooth finish over concrete surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of roof including cleaning the surface by using wire brush / pressure hose and applying high performance polyurethane liquid membrane roof casting cold in two coat @ 1.5 kg / sqm with spray / brush an elogation of 300% to 700% and tensile strength not less than 3 N/Sqm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTMD 2240. The item includes epoxy prime applied @ 0.15 Kg / Sqm and a getextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instruction and sound engineering practice complete all as specified and directed. Note :- Work shall be executed by authorized applicator of manufacture as per manufacturer's instrucctions and roof height upto double storey building.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green etc colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box (Min 60mm deep, suitable size) concealed in wall, including 3mm thick bakelite plastic laminated sheet top cover for sunken boxes flush to surface for mounting of switches / socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note- Switch, socket, Regulator paid separately.

All as per item 44 above but for one 6 Amp socket point on an independent board with 2.5 sqmm (FRLSH) copper conductor cable complete all as specified and directed.

All as per item 44 above but for one 6 Amp socket point on same board complete all as specified and directed.

All as per item 44 above but for one 16 Amp socket point on independent with 4.0 sqmm FRLSH unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Switch piano flush type 5 Amp single pole on way complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6A complete all as specified and directed.

S&F switch socket combination 5 in 1, 16 Amp flush type complete all as specified and directed.

S&F electronic fan regulator 5 stepped type complete all as specified and directed.

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

Supply and fixing of VTPN DB suitable for mounting MCCB as incomer of rating 200 AMP vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including fixing MCCB and MCB connection with aluminium thimbles as required complete all as specified and directed.

S&F of MCCB 63 Amp, 16KA, 4 pole including complete electrical connection complete all as specifed and directed.

S&F of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

Supply and fixing LED lights fitting 1 x 20 W, 4 feet 220 V, AC batten type fitting and connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F building security LED light 20 watt made up presure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-66 protection and impact resistance of IK 07 for building security purpose with bracket size made GI pipe medium grade 25 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS clamp of size 25 x 6 mm for fixing of building security light fittings complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories 230 V, 1200 mm sweep min air delivery 245 CFM with service value 6.00 BEE five star rates with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed.

S&F of DWC pipes having dia, 63/50 mm as per site requirement having corrugation on the outer wall and plain surface on the inner wall conforming to IS : 14930 (Part-I&II) for protection of under ground cable laid along pole / along wall / in PCC on GL / roof and including all fittings as required at site complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh) nut without earth lead protection pipe and test on completion complete all as directed. Note :- On testing after completion if desired earth resistance is not obtained the earthing will be redone at no extra cost.

ASHISH SHARMA (BID ID -3515394)

M/S shree traders (BID ID -3514540)

GEESR INFRA BUILDERS PVT LTD (BID ID -3509687)