PROVN OF STORE ROOM FOR RATION NEAR BLDG NO. NP 12 , PROVN OF TOILET AT PT GROUND NEAR BLDG NO. T15 AND SPL REPAIRS TO SEWAGE SYSTEM IN PAO QTRS AREA UNDER THE AOR OF GE DEOLALI

Amount

Excavation in trenches, in hard/dense soil n. exc. 1.50 Mtr wide and n.exc 1.50 Mtr in depth for foundation manholes etc n.exc. 10 Sqm on plan and getting out

Excavation in trenches, in hard/dense soil exc. 1.50 n.exc 3.00Mtr in depth for foundation manholes etc n.exc. 10 Sqm on plan and getting out

Returning and filling of soil including spreading levelling watering and well ramming in layyers n. exc 25 cm

Removing excavatd material n. exc 50 m and depositing where directed at a level n. exc 1.5 Mtr above the starting point

M&L for hardcore of broken stone gangue n. exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface. Hardcore or broken stone or boulders.

M & L for cement concrete 1:4:8 type D-2 as in foundation filling an mass concrete (40 mm graded aggregate)

M&L for fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified and directed.

All as per item No. above but except burnt bricks.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and directed.

M&L for two coats of cement base paint over a coat of chalk whiting newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a chalk whiting over 1.5mm thick wall care putty complete all as specified and directed.

M & L for Providing, precast cement concrete type B1, 1:2:4 20 mm aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. and setting in mortar complete with joints to match set in CM 1:4

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching finished fair and even incl. necessary form work.

S & F Mild steel TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed .

M&L for 75mm thick cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in plinth protection finished fair.

M & L for two coats of synthetic enamel paint over priming with red oxide over preparation of new surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, with 15mm screed bed in CM 1:6 floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for Glazed ceramic coloured tiles of size. 300x450x5 to 6mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S & F Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified and directed.

M&L for 75 mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L for Reinforced concrete pipes, class NP2 laid and jointed complete with collar for dia 150mm bore all as specified and directed .

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F in repair factory made solid PVC Moulded door shutter,28 to 30mm thick stiles with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face,supplying and fixing in frame at site as per specification and drawing.

S & F MS butt hinges 100mm size medium grade

S&FAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, all as specified

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm, all as specified and directed.

S&F Aluminium handles, cast type, anodised, 125 mm long complete, all as specified and directed.

S&F steel ventiliter with top hing shutter incl hinges steel peg stay etc. complete

S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covfering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm

S&F vitreous china wash basin white, flat back 580 x 450 mm excluding taps, waste coupling and plug and porcelain stopper (but incl. brackets) fixed in repairs.

S&F plastic water closet seat black/white in colour & cover and mild steel chromium plated or aluminium hinging device for pedestal pan WC/Anglo indian type incl all fixtures for fixing

S&F PVC (SWR) Pipes 75 mm bore with rubber ring joints laid in floors or on walls or laid in trenches.

All as per Item No. 37 above but except pipe.

S&F 110mm bore PVC(SWR) pipes single socketed in any length wilth rubber ring joints laid in floor or on walls complete all as specified

All as per Item No. 39 above but except pipe.

S&F PVC (SWR) junction single (single T) equal or unequal of 75mm bore all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 110mm bore.

S&F PVC(SWR) vent cowl as specified of dia 75mm bore.

S&F PVC(SWR) vent cowl as specified of dia 110mm bore.

S & F waste coupling PTMT screwed down for 32 mm/40 mm bore PVC/steel down pipe as specified and directed.

S&F tubular towel rail 20 mm dia of brass chromium plated D type, 60 cm long between flanges all as specified and directed.

S&F in repair PVC water jet for pedestial pattern water closet of 15mm bore and 600mm long all as specified and directed.

S&F chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified and directed.

S&F GI water tubing 20mm bore med grade, laid in floors or on walls

S&F GI water tubing 15 mm bore med grade, laid in floors or on walls

S&F bib tap 15mm size cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed 1.5mm dia

S&F stop valve, 15mm bore dia, cast copper alloy screwed down, high pressure with clutch or butterfly handle, screwed both end for iron pipe or for union as directed etc completed.

S & F15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified and directed.

M & L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

S&F rotational moulded polythylene water storage tank (cylindrical/vertical with close stop) Hoisted and fix in position all as specified in SSR Part 1 (500 ltr capacity)

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed.

M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

M& L for RCC 1:2:4 Type Bo using 12.5mm grade stone aggregate as in slab supported on walls,beams and coloumns in floors,roofs,Chajjas,landings balconies,canopies,deck slabsand in shelves including formwork complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

S & F powder coated aluminum alloy interlocking snap grid 605mm x 605mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified and directed.

M & L for Machine cut kota stone slab 20-25mm thick as in skirting steps riser over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces as back coat in cement mortar 1:4 complete all as specified and directed.

M & L for Cement concrte Type C1 1:3:6 ( 20 mm graded aggregate ) as Bed Block for hold fast complete all as specified and directed.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified and directed.

M & L for Two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

S&F repair for glavinized mild steel wire cloths 0.56mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified and directed.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified and directed.

M & L for 2 nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and directed.

All as per item no-78 but divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars, any numbers (30 mm thk) complete all as specified and directed.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil.

M&L for Reinforced concrete pipes 100mm bore class NP-2, laid and jointed complete with collars, complete all as specified and directed.

All as per item No.83 above but for 200mm bore pipe.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 100mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, PCC bed and haunching, complete all as specified and directed.

All as per Sl Item No. 86 above but 150mm bore pipe.

All as per Sl Item No. 86 above but 200mm bore pipe.

M&L for cement concrete Type 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation bed concrete of manholes including demolition of cement concrete (unreinforced) is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete Type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs/benching and the like including weathering, slightly rounded for chamfered angles and throating including demolition of cement concrete (unreinforced) is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc.

M&L for rendering 15mm thick in CM (1:4) mixed with integral WPC on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement. (Note : WPC shall be measured and paid seprateley.)

Supply only liquid water proofing compound of approved make all as specified and directed .

M&L for precast reinforced cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) including demolition of cement concrete (reinforced) in floors / pavings, (below or above ground level) n exc 15 cm thick all as specified and directed.

S&F for mild steel TMT bars 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed.

S&F for PVC (SWR) bends with access door 110 mm dia complete all as specified and directed.

S&F for PVC (SWR) bends with access door 75 mm dia complete all as specified and directed.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and directed.

Cutting into road/ black top/PCC pavement of any thickness including excavation in any type of soil upto 0.50m to 0.80m width and 0.50m to 1.50m depth, refiling, compaction of soil after laying of PCC bed, haunching and pipe, packing and compaction with existing soling/GSB/WBM/WMM, and top surface prepared with 0.15m thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and directed for :-

(a) One Light point controlled by one switch

(b) One 3 pin socket outlet. 5 Amps on the same board.

(c) One 3 pin socket outlet. 5 Amps on the independent. board

All as item No- 101 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied and directed .

Supply and fix switch socket combination 5 pin 5 Amps flush type (multi purpose ) complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5/6 pin, 5 and 15 amp flush type universal complete all as specified and directed.

S & F lamp angle/batten holder Bakelite complete all as specified and directed.

S&F Decorative ultra slim linear LED lighting with extruded polycarbonate,environment friendly,energy efficient E-LITE LED PRIDE PLUS 18W LED 6000K Make:-Havells Cat Part num:- LHEXBLP7PN1W018 or equivalent In Bajaj / Philips / Wipro

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and directed.

S & F double door sheet metal enclosures factory made DBs 8 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and directed.Make:-Legrang,Cat No:5076 11 or equilavent in Siemens/Hanger

S&F MCBs Single Pole of 240 volts 5-32 Amps,10KA Capacity, 'C' Series of Make:-Legrand,Cat No: 4085-87 to 90,92,93,94,95 or eqivalent in Siemens/Hnger

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/Hanger

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed .

M & L in replacement of sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade incl 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) including conduit/PVC casing/caping

S&F LED Bldg Security light Endura City liner uber having long life versalite pressure die-cast aluminium IP66 roadway luminaries with high power 20W LED as light source with acrylic cover Make:-Havells LHEWEBP7PL6S020 or equivalent in Philips / Bajaj / Wipro

M & L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and directed.

Supply, Laying , jointing and testing 10 sqmm 2 core LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for Dry sand , filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply & fix PVC Conduit of size 20/25 mm with all requisite accessories I.e junction box,inner & outer corners,bends,tees,collers,reducers etc complete all as specified and directed.

Supply & fix / install new Exhaust fan Heavy Duty, Gray Colour,1400 Rpm, Size 300 mm Metal Body type with complete accessories complete all as specified and directed. Make :- Havells Model :- Turbo force Or equivalent in Philips / Bajaj

Material and labour for point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-

(a) One light point controlled by one switch with cable 1.5Sqmm Size

(b) One fan point controlled by one switch with cable 1.5sqmm size

(c ) One 5 pin socket outlet 5 Amps on the same board.

(d) One 5 pin socket outlet. 5 Amps on the independent Board

Supply and fix modular switch one way 6A ,1 module complete all as specified and directed.

Supply and fixing Socket 6A-2/3 pin combined 2 module complete all aspecified and directed.

Supply and fixing Modular White cover plate with frame,3 Module

Supply and fixing Modular White cover plate with frame,8 Module

Supply and fixing Modular Metal flush box 3 module

Supply and fixing Modular Metal flush box 8 module

S&F Surface and wall mounted LED Fitting with Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 20W LED Fitting Make:-Havells E-LITE LED PRIDE PLUS NEO Cat Part Num :-LHEXACP7INIW020, or equivalent in Philips/ Bajaj / Wipro

S&F Sheet Metal enclosure for SPN DBs, 4 Ways, Double Door (IP-43), built in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed Make: L&T ( Cat No:-DBSPN004DD)/ Legrand /C&S/Havells

Supply & fix for steel water tubing of 20 mm bore pipe ''medium grade including all fitting complete to wall and ceiling or laid in floors complete.

M&L for cutting the existing GI pipe line of any size and insert GI tee of suitable size for branch connection

S&F Gun metal globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 20 mm bore

Note: Amount of sch of credit of Rs.'NIL'/-will be deducted from total amount of BOQ.

Vinod Enterprises

M/s. JBSR ENTERPRISES.